Dang , i dont like doing glass replacement bc the glass isn't original i like to buy a oem used housing but i will never again buy a bare housing bc there is to many small parts that needs to be switched over
And i didnt like how he just stuck a jimmy tool in insted of heating it up then pulling it up then push it in. But the phone kinda looks like its been open bf tho
can anyone start with a bone dry housing and assemble the 13 with detailed screw size lengths and placement? i have been looking for two weeks i need to put my phone back together my screw mat was knocked out of my hand i had everything together an organized
So it happened and i ripped it by mistake , and the answer is u still have 5g service Because this for the wifi not 5g so u will not be able to use wifi
Hi! Was wondering if you’ve ran into this problem. My volume up button & mute/silent mode buttons do not work after rear glass repair. My guess is the wireless coil was damaged since my power and down button work. My question is should I just change out the mute/power flex cable (removing motherboard and battery of course) or should I go ahead and change the wireless coil also? I am not sure which would correct the issue
It depends on the model of phone, I'm assuming its a 13 which means you can do either option. If you have even a cheap soldering iron you can replace only the flex cable if not then replace the flex with the coil.
Wow someone who actually took everything out. Thank you!
Nice Work.
Now when you put it all back together did the device have service again? I noticed that 5G antenna cable is EXTREMELY sensitive.
Sir what is the last flex cable you removed 10:59. Mine is broken while housing replacement
Show me flash light setup
Do you perhaps know where the NFC antenna is located?
What is last antenna you removed called?
I relied on this video for what began as ONLY a back glass replacement which turned to a wireless coil and battery replacement as well.
Dang , i dont like doing glass replacement bc the glass isn't original i like to buy a oem used housing but i will never again buy a bare housing bc there is to many small parts that needs to be switched over
And i didnt like how he just stuck a jimmy tool in insted of heating it up then pulling it up then push it in. But the phone kinda looks like its been open bf tho
Can The ear speaker mess/grill be replaced?
That is a bigger battery than before!
You did mot take the switches off
U skipped the ringer removing part
can anyone start with a bone dry housing and assemble the 13 with detailed screw size lengths and placement? i have been looking for two weeks i need to put my phone back together my screw mat was knocked out of my hand i had everything together an organized
How much you charge to replace the glass on the Apple Watch Series 3 42mm
Very nice
Hey! Just wanted to know if the ‘sound damping balls’ are present in the loud speaker in the regular iPhone 13 models?
what if the flex cable behind the motherboard gets ripped? can I still use my phone just with no 5g?
So it happened and i ripped it by mistake , and the answer is u still have 5g service
Because this for the wifi not 5g so u will not be able to use wifi
Would it work if I replace motherboard from clean iPhone 13 to an iCloud one. Would everything work with no issues
Most things would work as a phone, however there would be a ton of notifications for the battery screen and Face ID etc.
Does a couple of drops of rainwater on iphone 13 mute/silent switch damage it? Is it sealed to withstand that?
its possible, but shouldn't because the gaskets shouldn't be bad as its a fairly new phone. The seals normally only give out under pressure.
@@FIXDPHONES it’s a week old device
Hi! Was wondering if you’ve ran into this problem. My volume up button & mute/silent mode buttons do not work after rear glass repair. My guess is the wireless coil was damaged since my power and down button work. My question is should I just change out the mute/power flex cable (removing motherboard and battery of course) or should I go ahead and change the wireless coil also? I am not sure which would correct the issue
Also if you can, what was the name of the last part you took out?
It depends on the model of phone, I'm assuming its a 13 which means you can do either option. If you have even a cheap soldering iron you can replace only the flex cable if not then replace the flex with the coil.
GPS Antenna Flex Cable
@@FIXDPHONES great thank you! I appreciate the response 😃
What’s the name of that little plastic holder? 9:14
They are called spagers or plastic openers
The cable from logic board to frame that is name ?
The 5G antenna
@@FIXDPHONESbtw I had water seep into my case over two days. It was over the 5g antenna square. Should I be worried or is that water proof?
How did you remove the battery tabs? Did you heat up the back of the phone to remove the battery sticky tabs?
Auh! Looping porno music has to go. Good otherwise, thanks
Give away to me