Battery Capacity Meter Discharge Tester Analyzer How To

Поделиться
HTML-код
  • Опубликовано: 14 окт 2024
  • LIKE, COMMENT, SUBSCRIBE.
    In this video I’ll show you how to connect a HiLetgo Battery Capacity Meter Discharge Tester Analyzer
    1. The first test should be fully charged battery.
    2. Connect the battery to be tested positive to positive input, a negative input to the negative, cannot be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage.
    3. Direct start test need only one press of the "OK" button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing "+" or "-" buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the "OK "start testing.
    4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press "OK" to terminate flashing allows stable data display, press again "OK" button to return to the power-on state can just replace the battery test the next section......
    Error codes and their meanings:
    Err1: battery voltage is above 15V
    Err2: battery voltage is lower than the termination voltage
    Err3: Battery cannot afford to load or discharge current line too much resistance
    Err4: over current (current exceeds 3.1A)
    If you enjoyed this video help others enjoy it by sharing this video with your friends:
    And if you have any questions or comments, leave it in the comment section below.
    Feel like showing us how much you enjoy our video? Drop us a donation and show us some love!
    Link to Donation tiny.cc/afpehz
    Link To My Other You Tube Channel: / @pcaltech
    Affiliate link to banggood.com
    www.banggood.c...
    Affiliate link to Amazon.com
    www.pcaltech.c...
    This is the links below to things I used in this video:
    Link to the HiLetgo Battery Capacity Meter amzn.to/2ZFZFIL
    Link to Samsung Galaxy Grand Prime amzn.to/2XPsSRn
    Link to Mini Tripod amzn.to/2usSJCk
    Link to Phone Tripod Mount amzn.to/2OMkoot
    Link to the Battery Holder Case amzn.to/2WuGlMK
    Link to the Battery Storage Case Plastic amzn.to/30krshh
    Link to the Repair Mat amzn.to/2vsg1Ih
    Affiliate disclaimer:
    The links above are affiliate links, which will/may generate a sales commission. For example, the listed above its association with the Amazon affiliate program and I’m an Amazon associate. Which means that if you buy one of the product links, I’ll receive a small commission at no extra cost to you?
    Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future videos, and like my video, click on the bell to see more if you found it helpful, new videos are always being uploaded.
    Follow me on
    Facebook / pcaltech
    Facebook / alwynone
    Twitter / alwynnic
    Instagram / j66aj6
    Website www.pcaltech.com/
    Affiliate link www.pcaltech.c...
    Pinterest / alwynnic
    Disclaimer:
    The information, demonstration and any content contained in this video is for informational purposes only.
    PLEASE READ Warning… do this at your own risk. I am not responsible for what you do to your device.
    #alwynnicholas #howto #batterycapacitymeterdischargetesteranalyzerhowto.

Комментарии • 9