For more DIY tips, check out our RUclips channel, and don't forget to like, subscribe and hit the notification bell! @MrandMrsDIY #flooring #howto #diy
I always lay the first row , either use a string line or a long straight edge to make sure the laminate flooring or lvt flooring is dead straight then pack off the wall , then lay the other boards , if you don’t use this method you will have problems across the whole floor
No wallpaper! The grey wall is a 3D concrete printed wall, the OSB has been covered with some of Frenchic's Browning Wax and the Wooden slats are Acoustic Boards from Walls And Floors!
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
In my mind I still see you in Big Brother, it was the only one I watched, nice to see you're looking fit well. The flooring looks great.
Cheers Sam, take care
I always lay the first row , either use a string line or a long straight edge to make sure the laminate flooring or lvt flooring is dead straight then pack off the wall , then lay the other boards , if you don’t use this method you will have problems across the whole floor
Yes string lines and long strait edges work well, we built this building so we know the room was square
Great video well explained. I like the bright coloured wall , is that wall paper ,can you let me know please its realy nice 😁
No wallpaper! The grey wall is a 3D concrete printed wall, the OSB has been covered with some of Frenchic's Browning Wax and the Wooden slats are Acoustic Boards from Walls And Floors!
Great, thank you for your reply, amazing clean decorating honest so nice .😁
You didn't check the cut in the opposite corner what if it was only 5mm?
Which opposite corner
Big brother….if you know, you know
Yip you do
That roughneck cutter is nasty. I returned it and got a proper flooring sheer.
Haha had it for years!
Yea its fine on cheap thin flooring or lvt. No good for 12mm thick laminate. @MrandMrsDIY
Should you not be taping each one with an off cut to ensure a tight fit? Also this stuff is easily cut with a Stanley knife, much easier
Yep to both if you are confident enough!