@@afaelegendstv Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
@@afaelegendstv Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
Hi ka-Legends, I think that Setpoint is not required Set for that chiller because the Requirement of Carrier Chiller has a Required Temperature which is 6.7 Degrees Celsius or 44 degrees Fahrenheit. so the Freezing point is Zero Degrees Celsius or 32 degrees Fahrenheit. This is the Design of Carrier Configuration. Thank you for your Comment.
Many causes 1. Check the condenser fan motor ... cause of high condenser pressure if fan motor not operate. 2. Check discharge transducer ... for faulty transducer. 3. Clogged filter core or defective EXV Valve
How to set temperature for heating in carrier 30RQ302 chiller? I have tried many times to set heating upper limit temperature to 50C but there is 6 to 26 only. As much as I try there is always 6 to 26. Help me to do the needful.. It would be great if I get your WhatsApp/Viber number. Thanks in advance
Very good information
Laking tulong sa mga technician,
Tama Ka jan madam Ychie.
Mas maraming videos
Mas maraming matutu at matutulungan.
Tnx afae
No problem, masaya ang AFAE - LEGENDS na makatulong at makapagturo.
@@afaelegendstv Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
You saved hospital and my ass here thank you
Please like, share and subscribe. Thank you for watching the videos
Very helpful, thanks AFAE!
Glad it was helpful!
@@afaelegendstv Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
good content.
Thanks Zhack
👍👍👍
How can I turn on the air-conditioning on the main panel
Hi, in our chiller setpoint maximum can be set at 3.3Deg. Can it be reduced below 3deg. I tried to adjust but it reaches maximum of 3.3deg only. please help
Hi ka-Legends, I think that Setpoint is not required Set for that chiller because the Requirement of Carrier Chiller has a Required Temperature which is 6.7 Degrees Celsius or 44 degrees Fahrenheit. so the Freezing point is Zero Degrees Celsius or 32 degrees Fahrenheit. This is the Design of Carrier Configuration. Thank you for your Comment.
@@afaelegendstv Hello, yes you are right but my chiller set point can not reduced below +10 Celsius. How can I set it below 10 Celsius? TIA
Group B goes always in alarm cuz the pressure goes up to 4230 and it goes in alarm , how do i fix that ?
Many causes
1. Check the condenser fan motor ... cause of high condenser pressure if fan motor not operate.
2. Check discharge transducer ... for faulty transducer.
3. Clogged filter core or defective EXV Valve
WHAT IS PASSWORD FOR THE FACTORY CONFIGURATION MENU 30HXC CARRIER CHILLER?
0111
0113
13
88
11
How to set temperature for heating in carrier 30RQ302 chiller? I have tried many times to set heating upper limit temperature to 50C but there is 6 to 26 only. As much as I try there is always 6 to 26.
Help me to do the needful..
It would be great if I get your WhatsApp/Viber number.
Thanks in advance