pc technicians mother was raped and killed by a man who also kept unused powerful graphics cards and used inferior ones. you can see why hes touchy on the subject.
5 years later and this video just gave me a HUGE relief! I love you like I know you my whole life! I'm literally almost ready to cry from that stress that just left my body! I don't know what else to do to thank you other than like this video and subscribe to this channel! I wish you all the best in your life and those you love! THANK YOU
I know this video is 7 years old and you’ll probably never see this comment but OMG this video saved my life. I accidentally clicked the “save on startup” button. And I just spent hours reading through forums and nothing worked until I tried this. Why is NO ONE ELSE saying to do this trick. Everyone talks about clearing cmos, flashing bios etc but not just using safe mode and uninstalling after burner. Jay you are the best thank you
4aLse what do you do if it won’t even start up, and I tried to overclock I black screened and I took out the power cord and now it won’t turn on at all, Ives tried to take out the BIOS battery and now it won’t work st all
This literally happened to me today when I overclocked memory by 1000 with startup on. I literally did exactly as he said, freaked out, relaxed seeing windows load, freaked at black screen, then found out how to go into safe mode. I actually thought I cooked my card 😂
6 years later and this video is still helping noobies like me😂 i was laughing at the begining because i was panacing and thought my card was dead 😅 thanks for the help jay.
Finally this is exactly what happened to me 😂😂 I overclocked to 1000mhz to see what would happen which was stupid and I was freaking out.. thanks so much jay 🙏
You alluded to the fact that this is not the case for voltage overclocks, but you didn't actually talk about what to consider in those cases. Maybe a follow up video explaining the dangers associated with voltage overclocks, possible solutions to those problems and a general procedure to follow when trying to oc voltage would be helpful? Especially since it would help bridge the gap a little between complete novices and more experienced audiences, as quite a bit of your content recently has been aimed towards the former. I for one would love some tips for fixing voltage oc's as I have already ruined a few gpu's from lack of understanding of procedures. Great video though, helps people feel more free to get their money's worth!
Also I would like to point out that in windows 8.1 it's basically impossible to get into safe mode by mashing f8 due to load optimizations. The window where they register key presses is still there, but it's extremely small so you'd need either some really fast fingers or some luck. Alternatively you can boot to either a windows disk or usb drive with windows installer on it which will allow you to get to the same options page, if I remember correctly.
+sabotagekiwi Yeah I ran into the issue of not being able to enter BIOS on my W10 laptop the other day. I kept restarting and it would never register my key presses. When I actually shut down though instead of restarting it worked. I just installed Windows 10 on my desktop two days ago, haven't tested it actually, but the POST screen is visible for a couple seconds just like it was with Windows 7. I think there's a setting for fast boot within the Windows control panel, but fast boot is disabled by default in my BIOS (which I assume takes precedence).
Omg thank You so much I was so scared when my screen was all random colors I literally sat on the corner crying thinking my you was dead and it’s only a 70 dollar graphics card lol and then I overcloocked more reasonably and got a 40% increase
you can just hold the CTRL key on windows boot. it disables the apply on startup option in afterburner temporarily. dont know why nobody knows, its says it right there in the tooltip when you hover over the option!
There is a third method: Take the cooler off, and pour liquid nitrogen on it till u get the clockspeeds down, I mean if they can get a 6050x to 5.74ghz, it should keep it stable for long enough to disable the profile
Ah bless you, I was struggling from a bad overclock on my GPU and you saved the day. One note, you can get into the safe mode within Windows 10 as well - just hold down SHIFT, then chose the START button, then POWER and follow it by RESTART, then it will bring up the recovery settings as well.
I was terrified of building and tweaking with computers. Then I saw how Jay treats his stuff :P. Thanks for showing how sturdy the products actually are.
After watching this video, i had finally enough courage to start overclock my pc. After playing with the overclocking for a few hours, my screen froze. So i restarted my PC two times and on the third i could enable safe mode, delete afterburner, then go back into my pc, and IT wasnt destroyed, so i downloaded afterburner again, but didnt overclock too much, still my PC is much better then it was. I went from 9200 on firestrike, to 10900. I just wanted too thank you for this video, otherwise i wouldnt be able to get the full potential out of my pc
iLLixer404 Yeah. If you get an extreme edition CPU you have to do it some other way. But if you went normal cpu line (like I did) it makes your life easier
+OutcasT well, you could just try to get safe mode started as he suggested. You could then just fix the issue with the gpu you have installed already. Otherwise you're either looking for your old gpu that you just kept around for diagnostic purposes or looking for a really cheap gpu elsewhere.
Always keep a password on your user account, so then when you reach the log in screen (which won't open certain apps like afterburner), hold down the left shift key and then hit Windows restart button at the bottom right corner which will take you to startup options. This works inside Windows and for Windows 8, 8.1 and 10.
Remember to disable the "apply the boost on startup" option when you're trying to overclock? I always test and find the perfect overclock level before apply the boost on startup.
Got my HD7850 to a stable 1150mhz a couple years back based on your gpu oc video, it's still running strong. I've learned so much since then that overclocking seems like a no brainer to me, but I remember it being daunting and your videos really gave me the confidence to go ahead and play around and figure things out. I hope you never stop making instructional videos like these!
thank you jayz!!!!! thank you so much!!!! i almost ate myself out of frustration thats why i watch your videos cuz you always save me keep doing what youre doing you re literally saving peoples problems👍😘😁👌
Man, that Galax Hall of Fame GPU is seXxXy AF!!! They really nailed that shroud design, especially once they went all hella bright white! This is my 2nd X watching this video- and can't help but comment on it *AGAIN*
I want you to know i fully appreciate videos like this, because I, for one, am extremely easy into persuading into buying new hardware with all the review videos between you, paul, and kyle. Thanks for educational purposes....my wife and wallet send their regards.
Yeah my R9 390 doesn't overclock worth a fuck either lmao, even with a 3 slot cooler design it still doesn't run cool enough for me to bump up the core voltage a whole bunch without having a jet engine in my case.
kickachicken 88 in safe mode press windows+r and type msconfig then hit ok. Go to boot tab and uncheck safe boot. Then hit apply, ok, and then restart pc, if this doesn’t work tell me so I can tell you the complicated fix.
@@ijandnrjndnd guys, I do the same mistake :( than I uninstall msi.. :/ I do your steps and I dont have check save boot. When start win10 after shov me bacground screen video is crashed (show me some purple artefacts) and restart PC.. I mean hat now I must upload new BIOS to GPU - it is correct?
@@mildness4842 not really, because when your using safe mode it will use system drivers and won't utilize the game drivers for your card. It was designed for these specific kinds of situations like crashing and shit.
u can always use motherboard onboard gpu vga, hdmi,dvi slot, remove ur graphics card and insert the monitor cable in onboard display slot and after that deletethe profile or uninstall the msi after burner completely. reinsert ur graphics card and there u go its fixed 😃
Put salt in vodka, put it in freezer for 72 hours, put dry ice into a container, put vodka/salt mixture in container, then put the radiator in it. ez temps
I owned an FX 4100 and overclocked it to 4.4 GHz on its stock cooler (the one with copper heat pipes). That was a pretty good CPU, it was great with my HD 6670 GDDR5 edition. But I had to sell it, needed money back then. Though I paired the FX with a GT 630. I am still using the 6670 with a Sempron 145 unlocked to Athlon x2 4450e and overclocked to 3.2 GHz (still stock cooler, but this one is that Aluminum one). It still servers me well, since I am a filthy casual gamer (I rarely play any games). Somebody had a Pentium 4 with Hyperthreading (the 3 GHz variant) paired with the GT 210, they worked pretty well together for a low-end PC.
I couldn't finish watching this "everybody has a spare 980ti" and I know he was being sarcastic but it hurts when you don't have that kind of Hardware at all like me
MSI Bugged once for me same way (I was downclocking my card) and it made like last number that was avaible when I pressed reset (so 23124123+MHz) - it was crashing every time. I just removed configs by live linux usb.
Awesome ! Also, downclocking is for real enthusiasts (power consumption / thermal enthusiasts, that is). I would like to do so too with my future build.
MrBiky with new cards there is almost no need to downclock your GPU - I was doing that because I was thinking it is overheating but that wasn't case ;)
I have had to down clock my GPU, due to my motherboard not coping with both my fx 8350 and 980ti. My cpu is stuck to a 4.3ghz oc at 4 cores. While my 980ti is stuck at 80% max power draw. It isn't the psu, for I had issues with a 1kw psu in it. Well, connected to it. The 1kw psu was from a late 2005 apple power mac G5, that I had modded.
Matthew Tremain I like that case, but I really wouldn't trust that 11 years PSU. Even PSUs today have a warranty of 10 years at most, and that's with 80 plus gold and platinum ratings. I am 90% sure that PSU isn't giving more than 500W by now. Considering an 8350 with OC can reach about 200W consumption and the 980Ti has a power draw of 250W + the rest of your components, I say you should at least try it with a good PSU. Of you have a friend that owns a more recent 1, you should try it (also, I guess you know, but 980Ti requires at least a 600W PSU, so anything beyond that should do). I had an old 450W PSU that had like 13-14 years and was still giving around 230-ish W and could power an FX 4100 and a Radeon 6670 GDDR5, but once I overclocked the CPU, system was unstable. Changed the PSU and the OC was never unstable again.
how? can you please explain. I got stuck with Overclocked clock settings.. I've Zotac Rtx 2070 mini .. i just tried Overclocking and i did around 1800-1900 something then after that I'm stuck with boost clock of what I've Overclocked. Even after uninstalling all drivers several times and Changing pcie slots as well. Please help
Just ran into this problem and have a quick alternative. Once you get into safe mode, instead of uninstalling msi, you can open it up in safe mode and uncheck the "Apply overclock at system start", then close and reboot. You may get an error message, but the setting sticks after you reboot.
i have the same problem, but it just a bit different. my card still alive, and not crashing, but its give lower fps, slower startup and i cant modify anymore in msi afterburner. can someone help me how to fix that?
@@RainyFN yp , i remove the card, give it a little paste on the gpu and reinstall. After that i go into the device manager, and update the driver. Thanks god gt 630 works again :)
If you have a Zotac card and use Firestorm, it resets the overclock settings if your PC crashes (which can happen due to overclocking) even with startup enabled. Honestly, kind of annoying, but helps with bad overclocks. Not entirely sure if it's intended, but it does actually help with that.
Lol, when I ran my r9 290 +200mv, 1140mhz in my old room, it ran actually hot but stable, like 95° C :D. Somehow in my new bigger room that translates to only 84°C
you can't open most programs in safe mode, pretty much anything that isnt dependant on stock windows drivers. For example MSi afterburner needs nvidia/amd drivers to work which are not activated in safe mode.
Can edit the profile/settings with notepad so it's not activated. In MSI Afterburners install directory, in folder Profiles there is a cfg file. Edit with Notepad and there is a line "RememberSettings=1", change value to 0.
If you have an SSD and mess up your overclock on Precision XOC (with apply clocks on startup enabled), all you have to do is use the small frame of time before the clocks kick in to use task manager and kill the precision XOC process. I'm pretty sure it's a similar sort of thing on MSI Afterburner, even without open application on startup disabled and the apply clocks on startup enabled, the background process will always run on startup. I messed up a profile ages ago and that's how I fixed it, I instinctively killed the process before it fully kicked in and gave me a black screen.
Like literally I did this mistake in precision x oc with boot on startup enabled and also apply clocks on startup and all I had to do was force quit it before it started and I could use my PC forever. Ofc I still had to remove the profiles from XOC and then open it again
I've never found Overclocking worth it, especially on a GPU. Is it really worth the extra heat, noise and shortening the life span of your hardware for 5 FPS Max. Not for me.
You can do it! GPU OC's are so simple with MSI afterburner. Just slide the core clock right until you start to get weirdness. If you go too far then its ok, just tone it back a little and then you will be fine. I built my first system about a year ago and I watched a lot of Jay's videos. I have an OC on my GPU and my CPU and I have never had any issues with either.
Only thing that failed me was my 8800 GT. But that's probably because of the single slot cooler and 103°C under load. Also they tend do die after 2-3 years in general.
Or instead of using another graphics card use the motherboard as a hdmi output if it has the ability
Not all CPUs have igpu...
JayzTwoCents Especially older ones or server CPUs
D Quack stupid argument. Please do not get upvotes...
Most modern ones do though
x99 doesnt
That's true. I have a spare 980ti just in case I have issues with my 680. If that one has issues I use the spare Titan Xti FTW Classified ACX3.5.
Hless421 lol
trying to be funny not even near.
pc technicians mother was raped and killed by a man who also kept unused powerful graphics cards and used inferior ones. you can see why hes touchy on the subject.
+metrallata you know, this would be me right now if I was completely fine with the R7 250's performance. except it would be a spare RX 480
Metrallata Clearly it's a touchy subject judging by his reply.
5 years later and this video just gave me a HUGE relief! I love you like I know you my whole life! I'm literally almost ready to cry from that stress that just left my body! I don't know what else to do to thank you other than like this video and subscribe to this channel! I wish you all the best in your life and those you love! THANK YOU
Bro frrrr
I know this video is 7 years old and you’ll probably never see this comment but OMG this video saved my life. I accidentally clicked the “save on startup” button. And I just spent hours reading through forums and nothing worked until I tried this. Why is NO ONE ELSE saying to do this trick. Everyone talks about clearing cmos, flashing bios etc but not just using safe mode and uninstalling after burner. Jay you are the best thank you
1. Dont be afraid
2. Play with it
3. Remember to keep it clean
Pienimusta lol
4. You guys need to tap it.
only dirty minded people get this
@Rottenlinx who isn't
Nice tminggg looll
1 GHz "Little bit too high"
so what do you do when you misclicked the Master Setting on msi by accident. so far it seems to have messed with its factory defaults
1. Restart in Safe Mode. (Pressing F8 while booting up).
2. Uninstall MSI Afterburner.
3. Restart Normally.
4. Voila !!
Other way :
1. Remove Graphics Card.
2. Boot using motherboard port.
3. Uninstall MSI afterburner.
4. Put graphics card back.
5. Voila !!
Voila means
4aLse hello can you please help me
4aLse what do you do if it won’t even start up, and I tried to overclock I black screened and I took out the power cord and now it won’t turn on at all, Ives tried to take out the BIOS battery and now it won’t work st all
You fried you gpu you have to get a new one
Toxic Moguli why would the gpu be the one that fried tho, I tried to overclock the cpu
Oh my God, my heart was in my ass when I made a bad overclock... You dont even know.
Facking same m8
Holy shit same...
Same
Same, Everytime I start a game, it keeps crashing
Bro, I literally overclocked mine by 1000 on accident cuz some dumbass video I was watching said it was fine
This literally happened to me today when I overclocked memory by 1000 with startup on. I literally did exactly as he said, freaked out, relaxed seeing windows load, freaked at black screen, then found out how to go into safe mode. I actually thought I cooked my card 😂
Same
Did it with my core clock
Same I really paniced 😂
@@bombawafer4191 I did core clock +1000 Mhz 💀. It's a miracle my laptop still works
Same
Bro ur a lifesaver I’m here 3am freaking out thank you for the help ur the best
Same here
Literally me Rn 3 am
bruhhhh its literally 3 am rn LMAOOO
This guy is a huge lifesaver he saved my pc from being black screened Thank you so much!
Intergrated Graphics is your friend no need for second GPU
LiteGaming True, that's what I was just thinking
But not all motherboards have display outputs
LiteGaming Only works with cpus with integrated graphics :)
JustJedi most do exeptions to old and xeon
Tedesco but most do
rule 1: dont activate startup while trying new overclock
why
Slaughter Tuber watch the video
I aggree
IKR. Shouldn’t take a genius to figure that out. 🙌
Slaughter Tuber so if you overclock too far, it doesnt always start up with the overclock
You acted my reaction when i did this hahahaha
Bro i open my afterburner then max the overclock it went green i was so scared i just turn off my pc and on it again and everything is fix now lok
How you fix it
"You all have spare 980ti's right?" lol
I only have a fucking gt210
@@user-md9sx8fm6z I have a gt 220 beat that
I got a gtx 650 1gb and a radion rx 570 8gb
I litterally only have a 1660
Gtx 760 gang
Seems like MSI should be able to add a recovery feature to Afterburner, rather than having to uninstall it in safe-mode. How 'bout it MSI?
6 years later and this video is still helping noobies like me😂 i was laughing at the begining because i was panacing and thought my card was dead 😅 thanks for the help jay.
Finally this is exactly what happened to me 😂😂 I overclocked to 1000mhz to see what would happen which was stupid and I was freaking out.. thanks so much jay 🙏
ShxShlix lol it’s all good now
Thanks to twitter I found this, didn't show up in my feed and unsubscribed me.
Sam Sokolov That happens sometimes, just youtube being stupid.
youtube = FUCKED
Az3x That a good way to describe it.
Same, Not on my subscriptions page but it showed up in the home tab
H3H3 baby!
You alluded to the fact that this is not the case for voltage overclocks, but you didn't actually talk about what to consider in those cases. Maybe a follow up video explaining the dangers associated with voltage overclocks, possible solutions to those problems and a general procedure to follow when trying to oc voltage would be helpful? Especially since it would help bridge the gap a little between complete novices and more experienced audiences, as quite a bit of your content recently has been aimed towards the former. I for one would love some tips for fixing voltage oc's as I have already ruined a few gpu's from lack of understanding of procedures. Great video though, helps people feel more free to get their money's worth!
he is probably already making them. seemed like he knew there was a clear difference so probably has already thought of it.
You're right, didn't really consider that!
Also I would like to point out that in windows 8.1 it's basically impossible to get into safe mode by mashing f8 due to load optimizations. The window where they register key presses is still there, but it's extremely small so you'd need either some really fast fingers or some luck. Alternatively you can boot to either a windows disk or usb drive with windows installer on it which will allow you to get to the same options page, if I remember correctly.
sabotagekiwi did you actually just say that? this is the youtube comment section right? where is the rage? lmao
+sabotagekiwi Yeah I ran into the issue of not being able to enter BIOS on my W10 laptop the other day. I kept restarting and it would never register my key presses. When I actually shut down though instead of restarting it worked. I just installed Windows 10 on my desktop two days ago, haven't tested it actually, but the POST screen is visible for a couple seconds just like it was with Windows 7. I think there's a setting for fast boot within the Windows control panel, but fast boot is disabled by default in my BIOS (which I assume takes precedence).
Omg thank
You so much I was so scared when my screen was all random colors I literally sat on the corner crying thinking my you was dead and it’s only a 70 dollar graphics card lol and then I overcloocked more reasonably and got a 40% increase
Also, you can press and hold the key when Windows boots to bypass Afterburner settings.
Don't click "apply on startup" until you find a 100% stable oc. If your PC freezes you can just reset it and you're back to stock. Hope that helps!
England is my city thanks
My laptop frezes after launching MSI afterburber pls help
@@Ali_Ayman03 uninstall and reinstall
you can just hold the CTRL key on windows boot. it disables the apply on startup option in afterburner temporarily. dont know why nobody knows, its says it right there in the tooltip when you hover over the option!
Mine did not work anymore it the fan is not even spinning :/
There is a third method: Take the cooler off, and pour liquid nitrogen on it till u get the clockspeeds down, I mean if they can get a 6050x to 5.74ghz, it should keep it stable for long enough to disable the profile
*6950x
Kishen Pankhania
*goes to the backyard for another bucket of liquid nitrogen.*
XD
Nope that will crash the same way. The temps are no problem. The voltage is much too low.
@@HeavyMetalGamingHD Yeah.
what if my gpu is doing that even before windows loads with out any overclock :'l
Reinstall os
put it in the oven
im having this problem right now, any solution?
Ah bless you, I was struggling from a bad overclock on my GPU and you saved the day. One note, you can get into the safe mode within Windows 10 as well - just hold down SHIFT, then chose the START button, then POWER and follow it by RESTART, then it will bring up the recovery settings as well.
I was terrified of building and tweaking with computers. Then I saw how Jay treats his stuff :P.
Thanks for showing how sturdy the products actually are.
shut up
Parental Guardian What’s your problem, this guy has a point, don’t be a butthole.
Sturdy, until... cough cough ...not.
OH YEAH I DEFINALTLY HAVE A SPARE 980 TI
i have 10 spare titan V's
I got a spare hmm...
I got a spare Rage 128 Ultra, not sure if Win10 will boot at all
use integrated graphics
if your motherboard has integrated graphics card you just have to disconnect the video card you were trying to OC.
Thank you for help , i tought ot was done with my gpu gtx 1660 ti
Oh my God thank you dude I was freaking my ass off and I did the exact same mistake you kind of did I added an extra number thank you so much
After watching this video, i had finally enough courage to start overclock my pc. After playing with the overclocking for a few hours, my screen froze. So i restarted my PC two times and on the third i could enable safe mode, delete afterburner, then go back into my pc, and IT wasnt destroyed, so i downloaded afterburner again, but didnt overclock too much, still my PC is much better then it was. I went from 9200 on firestrike, to 10900. I just wanted too thank you for this video, otherwise i wouldnt be able to get the full potential out of my pc
So how do you boot into safe mode?
This is why I keep an ancient GTX 260 around.
I hava a HD4850 I picked up for 10 bucks in the used hardware section...
I actually have a gtx 260 lol
This happened with my 3080 and it worked YOU ARE A LIFE SAVER 🙏
This version of jay is funny than today's jay
you can use the integrated gpu... seems easier :p
not every CPU has this feature but nice input.
iLLixer404
Yeah. If you get an extreme edition CPU you have to do it some other way. But if you went normal cpu line (like I did) it makes your life easier
AMD FX CPUs also don't have an iGPU
OutcasT
True. So, if you have an Intel non extreme edition or an AMD APU, you can use the iGPU to erase the overclock.
+OutcasT well, you could just try to get safe mode started as he suggested. You could then just fix the issue with the gpu you have installed already. Otherwise you're either looking for your old gpu that you just kept around for diagnostic purposes or looking for a really cheap gpu elsewhere.
Always keep a password on your user account, so then when you reach the log in screen (which won't open certain apps like afterburner), hold down the left shift key and then hit Windows restart button at the bottom right corner which will take you to startup options. This works inside Windows and for Windows 8, 8.1 and 10.
After 3 days of battling this problem, I have now finally won. All thanks to you
thank you sooooo much
i was struggling because I was thinking that I need a new graphics card but thank you so much
life saver.
Remember to disable the "apply the boost on startup" option when you're trying to overclock? I always test and find the perfect overclock level before apply the boost on startup.
Got my HD7850 to a stable 1150mhz a couple years back based on your gpu oc video, it's still running strong. I've learned so much since then that overclocking seems like a no brainer to me, but I remember it being daunting and your videos really gave me the confidence to go ahead and play around and figure things out. I hope you never stop making instructional videos like these!
thank you jayz!!!!! thank you so much!!!! i almost ate myself out of frustration thats why i watch your videos cuz you always save me keep doing what youre doing you re literally saving peoples problems👍😘😁👌
Man, that Galax Hall of Fame GPU is seXxXy AF!!! They really nailed that shroud design, especially once they went all hella bright white!
This is my 2nd X watching this video- and can't help but comment on it *AGAIN*
you could also just use your onboard graphics instead of a differnt gpu
Bruce Sherbet not every cpu had that
most modern cpus do im just saying that tho if u dont wanna boot into safe mode :)
Bruce Sherbet
well or gpu with Dual bios helps alot
Not many GPUs have dual bios but there are all methods
Bruce Sherbet
dual bios is safe bet if problems it froze but it can boot up with default setting
I want you to know i fully appreciate videos like this, because I, for one, am extremely easy into persuading into buying new hardware with all the review videos between you, paul, and kyle. Thanks for educational purposes....my wife and wallet send their regards.
Love that Jay was my first video when searching
True hero. I thought i was doomed. You deserve my sub
That's honestly how I reacted when my GPU crashed.
R9 280x doesn't overclock that well, I'm upgrading to a 1070 soon though ;D
Ikr my R9 390 doesn't overclock well neither
Yeah my R9 390 doesn't overclock worth a fuck either lmao, even with a 3 slot cooler design it still doesn't run cool enough for me to bump up the core voltage a whole bunch without having a jet engine in my case.
The 1070 is awesome. I have the evga ftw 1070 and I love it so much
bullshit
Barely OCed my R9 280x and have been having heat problems constantly. It's not worth it.
SAFE MODE, is the only simple way, no need to uninstall the msi burner, just delete the profile.
Right.
Either delete the file Afterburner saves the profiles in.
Or even trickier: open the file and edit the "apply overclock on startup" entry.
teeracullaz if i am on amd ?
Same thing
Or a Linux live CD?
teeracullaz w
Thanks dude i needed to do this when resetting bios didn't do it. Your vid helped calm my panic when I couldn't boot to win
I overclocked my gpu, I went to safe mode and uninstalled msi, I can no longer use my pc on anything but safe mode, please help
kickachicken 88 in safe mode press windows+r and type msconfig then hit ok. Go to boot tab and uncheck safe boot. Then hit apply, ok, and then restart pc, if this doesn’t work tell me so I can tell you the complicated fix.
@@ijandnrjndnd guys, I do the same mistake :( than I uninstall msi.. :/ I do your steps and I dont have check save boot. When start win10 after shov me bacground screen video is crashed (show me some purple artefacts) and restart PC.. I mean hat now I must upload new BIOS to GPU - it is correct?
So if my Cpu has onboard grafics I simply cound switch between Gpu and cpu onboard. Right?
If it's enabled in the bios . Then yes
Wolly 9102 that would be the easiest thing to suggest in my opinion
Adam JP indeed I Have my HD 530 Running alongside my 1060 purely for anything happens to my 1060 I still get an image on screen :p
Flyingchris2249G that's what I was going to suggest
Enabling your on board graphics card produces more heat though -.-
Holy shit! Your reaction at 2:14 was literally me 5 minutes ago! hahahah thanks for the vid!
liked and subbed cause my dad isn't beating me tonight
You saved my life. I am eternally grateful .
Good video for new PC gamers, but most motherboards will have on board graphics you can use, rather than going out of your way to install a new GPU.
real gamers play games in safe mode...
I thought about that.. because you don't have background apps
@@mildness4842 not really, because when your using safe mode it will use system drivers and won't utilize the game drivers for your card. It was designed for these specific kinds of situations like crashing and shit.
YOU DESCRIBED MY SITUATION DOWN TO THE TEE. I LOVE YOU SOO MUCH MAN THANK YOU 😁😁😁😁
Well overclocking my gpu actually damaged it really hard and now I can't even play mc without getting instant artifacts, help? Please?
same lmao
@@kraccmacclul just bios and restart to
factory
@@ethnic8516 bro after watching this video my laptop was fixed
i dont know how to uninstall
it says uninstall/change but then it says do u want to keep the same settings
i click no
and nothing happens
plz help
F8 will not work on 8 and higher.
He said older.
+Thales Sousa he said windows 8 OR older, not older than. By higher I note that 8.1 is included
JAYZ TWO CENTZ U SAVED MY LIFE
This just saved my butt today. Thank you jay!
So, if I have an iGPU with my cpu, can I just remove the GPU instead of the switch gpu method?
Columini yes
TurboCMinusMinus I dun think thats possible bruh
Well, you can overclock integrated.
With limiters.
Yea u can use ur integrated graphics, just remove the bad OC gpu and plug in a video signal onto ur MOBO.
u can always use motherboard onboard gpu vga, hdmi,dvi slot, remove ur graphics card and insert the monitor cable in onboard display slot and after that deletethe profile or uninstall the msi after burner completely.
reinsert ur graphics card and there u go its fixed 😃
But I don't think all motherboards support on board graphics.... right?
Ihaveleaky Spaceboots ya but most of the mobo support onboard display specially low end
+Ihaveleaky Spaceboots most of those are high end mobo's
yea that makes sense.
newer mobo doesn't have onboard graphic. the one that has integrated gpu is the CPU itself
bro you are the love of my life i am permanently in your debt
Yo you literally saved my life I had a heart attack when this happened never again doing this
fps over quality. boy does that one pixel run at 1,000,000 fps on me gtx 980 ti :)
Distant vErvE i have a gtx 980 ti and i get a pink or white screen that crashes my pc when i start any game
Tell me how to liquid cool a radiator.
Remove radiator from case, place radiator in bucket of ice water
atvkid0805 no .. place in a river ... there is waterflow
Put salt in vodka, put it in freezer for 72 hours, put dry ice into a container, put vodka/salt mixture in container, then put the radiator in it. ez temps
shouldn't safety be our number one puhrrity
HendrixCikes puhhrity
Holy shit dude I was about to have a mental breakdown Thank you so much😭
Thx Jay. You caused me to Fubar my video card and then taught me how to fix what I Fubar’d.
or if you have an intel cpu, just remove the gpu and launch with intel hd graphics, assuming you didnt disable in bios
***** I didnt know that, I am back with the i7 4790k back when haswell processors have had integrated graphics.
Skylake K series processors do have integrated graphics. It's mostly just the extreme edition processors that don't (Haswell-E, Broadwell-E)
ThePaisleyProject I mean you still can get into BIOS with a bad oc so it doesn't matter if it's disabled
Ryan good point, i was meaning if you decided to remove the gpu
currentcrazy1 are you referring to the 6950x?
hey, give me your spare 980ti, i will give you my geforce 210 :V
Msi I bought a GeForce 210 thinking it would play subnautica. Hint it didn't
Leif Anderson DAMN how did you get to that tought?
I really don't know, and to make it worse my cpu is a fx 4100.
I owned an FX 4100 and overclocked it to 4.4 GHz on its stock cooler (the one with copper heat pipes). That was a pretty good CPU, it was great with my HD 6670 GDDR5 edition. But I had to sell it, needed money back then. Though I paired the FX with a GT 630. I am still using the 6670 with a Sempron 145 unlocked to Athlon x2 4450e and overclocked to 3.2 GHz (still stock cooler, but this one is that Aluminum one). It still servers me well, since I am a filthy casual gamer (I rarely play any games).
Somebody had a Pentium 4 with Hyperthreading (the 3 GHz variant) paired with the GT 210, they worked pretty well together for a low-end PC.
Love you mate, been following for a long time and I just love how you have made this video haha
These troubleshooting videos are really very useful , thanks
I'm hoping to overclock my gpu now thanks Jay
Or that if you also want to overclock your CPU be sure to put AT LEAST 2.0V core voltage to keep it stable
(don't)
steffeeH I don't get what you're saying, to do it or not? and I can't overclock my cpu anyway
Whos Dead He was being funny - 2V core voltage is ridiculously high
slipknotboy555 he probably fried his gpu by now
could you also use no graphicscard and use onboard graphics?
Yes, except not all motherboard have onboard graphics.
not all cpus have their onboard graphics
I couldn't finish watching this "everybody has a spare 980ti" and I know he was being sarcastic but it hurts when you don't have that kind of Hardware at all like me
Ikr
its a joke
MSI Bugged once for me same way (I was downclocking my card) and it made like last number that was avaible when I pressed reset (so 23124123+MHz) - it was crashing every time. I just removed configs by live linux usb.
Awesome ! Also, downclocking is for real enthusiasts (power consumption / thermal enthusiasts, that is). I would like to do so too with my future build.
MrBiky
with new cards there is almost no need to downclock your GPU - I was doing that because I was thinking it is overheating but that wasn't case ;)
Ace
Well, you are right too, since most of them already have fan 0 RPM mode. But it would be fun to see how much I can underclock it.
I have had to down clock my GPU, due to my motherboard not coping with both my fx 8350 and 980ti. My cpu is stuck to a 4.3ghz oc at 4 cores. While my 980ti is stuck at 80% max power draw. It isn't the psu, for I had issues with a 1kw psu in it. Well, connected to it. The 1kw psu was from a late 2005 apple power mac G5, that I had modded.
Matthew Tremain
I like that case, but I really wouldn't trust that 11 years PSU. Even PSUs today have a warranty of 10 years at most, and that's with 80 plus gold and platinum ratings. I am 90% sure that PSU isn't giving more than 500W by now. Considering an 8350 with OC can reach about 200W consumption and the 980Ti has a power draw of 250W + the rest of your components, I say you should at least try it with a good PSU. Of you have a friend that owns a more recent 1, you should try it (also, I guess you know, but 980Ti requires at least a 600W PSU, so anything beyond that should do).
I had an old 450W PSU that had like 13-14 years and was still giving around 230-ish W and could power an FX 4100 and a Radeon 6670 GDDR5, but once I overclocked the CPU, system was unstable. Changed the PSU and the OC was never unstable again.
Theres also a key combo that lets you not run the MSI Afterburner profile on boot.
how? can you please explain. I got stuck with Overclocked clock settings.. I've Zotac Rtx 2070 mini .. i just tried Overclocking and i did around 1800-1900 something then after that I'm stuck with boost clock of what I've Overclocked. Even after uninstalling all drivers several times and Changing pcie slots as well. Please help
@@tusharanaje32 If you are overclocking set the Power limite tô 100 not 120 you dont need to squeeze 20% If you are already overclocking
What key combo?
Just ran into this problem and have a quick alternative. Once you get into safe mode, instead of uninstalling msi, you can open it up in safe mode and uncheck the "Apply overclock at system start", then close and reboot. You may get an error message, but the setting sticks after you reboot.
Thank you. I needed a little help getting to safe mode. Last time I knew where safe mode was by heart was in the Windows 7 days.
i have the same problem, but it just a bit different. my card still alive, and not crashing, but its give lower fps, slower startup and i cant modify anymore in msi afterburner. can someone help me how to fix that?
Same here. did you find a fix?
@@RainyFN yp , i remove the card, give it a little paste on the gpu and reinstall. After that i go into the device manager, and update the driver. Thanks god gt 630 works again :)
When I enable safe mode, there’s a blue screen that says “please wait” and it just keeps loading forever
Is this still happening?
Same here
Josh Veasy same
If you have a Zotac card and use Firestorm, it resets the overclock settings if your PC crashes (which can happen due to overclocking) even with startup enabled. Honestly, kind of annoying, but helps with bad overclocks. Not entirely sure if it's intended, but it does actually help with that.
I fucking love RUclips....
Was some panic attacks but thanks to this video!!!!!
I had my old GT 610 oced 300mghz stable. Hot. But stable. 82C
I did that a while ago
What games can you play on a 610?? I have one in my spare PC and it's awful at everything.
Goofygiggles I overclocked my GT 610M on laptop by 120Mhz. Temps reaching 88℃
GT 630m here.. hail peasants
Lol, when I ran my r9 290 +200mv, 1140mhz in my old room, it ran actually hot but stable, like 95° C :D.
Somehow in my new bigger room that translates to only 84°C
Can't you just untick "apply at startup" in safe mode? Instead of reinstalling?
woopygoman I buy it for tree fiddy Vietnamese dong
I believe if you did it as soon as you open the .exe the profile would activate and then potentially crash the system anyways
I don't think you can open up 3rd party apps in safe mode.
you can't open most programs in safe mode, pretty much anything that isnt dependant on stock windows drivers. For example MSi afterburner needs nvidia/amd drivers to work which are not activated in safe mode.
Can edit the profile/settings with notepad so it's not activated.
In MSI Afterburners install directory, in folder Profiles there is a cfg file. Edit with Notepad and there is a line "RememberSettings=1", change value to 0.
You are an absolute legend! Keep up the great work
Thank you so much, I almost cried when I overclocked my cpu
If you have an SSD and mess up your overclock on Precision XOC (with apply clocks on startup enabled), all you have to do is use the small frame of time before the clocks kick in to use task manager and kill the precision XOC process. I'm pretty sure it's a similar sort of thing on MSI Afterburner, even without open application on startup disabled and the apply clocks on startup enabled, the background process will always run on startup. I messed up a profile ages ago and that's how I fixed it, I instinctively killed the process before it fully kicked in and gave me a black screen.
Like literally I did this mistake in precision x oc with boot on startup enabled and also apply clocks on startup and all I had to do was force quit it before it started and I could use my PC forever. Ofc I still had to remove the profiles from XOC and then open it again
I've never found Overclocking worth it, especially on a GPU. Is it really worth the extra heat, noise and shortening the life span of your hardware for 5 FPS Max. Not for me.
Richard Dale If you're getting 10 to 30FPS then overclocking is a must.
Well on low end cards every fps matter
IDC. I GET AROUND 720 FPS IN MINECRAFT. LOL
+ 3c will short life of gpu for like 1 day...
Well...i get about 10 to 13 fps extra on my gtx 745, so for mi it is worth it till the new en cards are being released for a massive upgrade 🍻🍻
I dont have enough braincells to understand this sadly..
imma send this to everyone who tells me overclocking your gpu is bad xD
Im still scared that Im gonna kill it...anyone else?
You can do it! GPU OC's are so simple with MSI afterburner. Just slide the core clock right until you start to get weirdness. If you go too far then its ok, just tone it back a little and then you will be fine. I built my first system about a year ago and I watched a lot of Jay's videos. I have an OC on my GPU and my CPU and I have never had any issues with either.
The only thing we have to fear, is fear itself. Franklin D Roosevelt.
Only thing that failed me was my 8800 GT.
But that's probably because of the single slot cooler and 103°C under load. Also they tend do die after 2-3 years in general.
Wow thx guys for the encouragement, I have a 1050 ti so im gonna try.
Samster Birdies it wont, voltages increase heat, frequency doesnt do anything 👍🏻
"its harder to break your stuff than it really is"... bruh my motherboard fried with out me even touching my computer...
What motherboard do u have btw?
@@sergiusko4327 msi x570 tomohawk
This video just stopped a cardiac arrest
What if I accidentally crank up both the core clock and memory clock to max?
When I restart I get a different screen and I have tried everything.help
Did you find a solution?
Safe reboot
Did for me
And then I uninstalled msi afterburner