The truth is you could get 50 plus with a 3s setup... something like a 60 amp esc, 3600-4000 kv , 2500 60c 3s and a medium pitch 33=34 mm prop...and it would last... But i know your channel is for pushing things to the extreme...Great job!
@@gen1power102 I do like to see insane setups just don't like to go to crazy with my own boats.... I just picked up a little volantex vector s and tested it today near my house... installed new batts in tx and used a fully charged batt 1300 mah i use in my airboat...just keeps dying on from the moment i put it in water. then coming back to life for a few seconds ..then running for a minute or so..i took it out and checked everything... no water ,no heat at all... range does not seem to make a difference... 30 foot or 100 ft ..it died several times for a couple of minutes on me... does this sound like a bad rx? thats the only thing i can think of...i never had any of my boats do this unless i got them wet...Any idea??? i don't want to send it back since it has to be a simple fix...thanks..happy boating!
I love your super fun little boat videos! 🤩😍😎🤙🏻 Can you write me the full name of your 1800 and 2200kv motors and where you bought it? Or a link to it? And what is a good price for a good cnc prop? Where did you buy them? I found them not good online and most times around 20€/$ a piece. Maybe there are cheaper shops who I don’t know. Thanks and and go on Greetings from Germany 👋🏻😊
I like the enthusiasm you have for boats-- I am trying to get into It with my own arrow 5-- (recommended by racing group near me) i am going to check out a race next week to pick all their brains and decide on a boat. Also going to build a dumas short stuff during the year
The cats are super fast but in my opinion I really think the monos are best all around boats. If I can recommend a boat I’d say stay over 40” because you don’t have to worry about choppy water as much as you do in smaller boats. And if possible start off with a stronger boat like carbon fiber or if possible a double thick carbon fiber boat.
I think your fighting the battery weight man...the more crazy you go w higher cells...the worse it gets for the boat size.....makes it not get up on plane and hence will be slower..😢
@@daviduruski7848 I live in a heavily wooded area where a fire could spread really easily and my dad doesn’t want me to have LiPOs in the house for that reason because they combust to easily
The truth is you could get 50 plus with a 3s setup... something like a 60 amp esc, 3600-4000 kv , 2500 60c 3s and a medium pitch 33=34 mm prop...and it would last... But i know your channel is for pushing things to the extreme...Great job!
I agree 100%! Just for some thrills 😂
@@gen1power102 I do like to see insane setups just don't like to go to crazy with my own boats.... I just picked up a little volantex vector s and tested it today near my house... installed new batts in tx and used a fully charged batt 1300 mah i use in my airboat...just keeps dying on from the moment i put it in water. then coming back to life for a few seconds ..then running for a minute or so..i took it out and checked everything... no water ,no heat at all... range does not seem to make a difference... 30 foot or 100 ft ..it died several times for a couple of minutes on me... does this sound like a bad rx? thats the only thing i can think of...i never had any of my boats do this unless i got them wet...Any idea??? i don't want to send it back since it has to be a simple fix...thanks..happy boating!
I am going to repower omee of my arrows-- what is the biggest motor I can get and still use 3s
Love the udi arrow content.
Thank you! 😀
I got excited for boats just listening to this guy lol.
Same here!
Just ordered my WL916 today and already have mods coming for it as well😎
I love your super fun little boat videos! 🤩😍😎🤙🏻
Can you write me the full name of your 1800 and 2200kv motors and where you bought it?
Or a link to it?
And what is a good price for a good cnc prop?
Where did you buy them?
I found them not good online and most times around 20€/$ a piece.
Maybe there are cheaper shops who I don’t know.
Thanks and and go on
Greetings from Germany 👋🏻😊
Awesome content
Appreciate the support!
Testing the limits!.... I love my Arrow.🙏♥️
Awesome boat for sure!
Been waiting for someone to do this!
It was super fun..
UDI BEAST
Oh yea!
Great content !!!!! Keep it up!
I got a arrow 5 coming in a few days .
Ima 6s it w a 3674 4100kv on 6s lol 😂
Please do a video on how you modified the stock motor mount. It would be interesting to see how you did it
I like the enthusiasm you have for boats-- I am trying to get into It with my own arrow 5-- (recommended by racing group near me) i am going to check out a race next week to pick all their brains and decide on a boat. Also going to build a dumas short stuff during the year
The cats are super fast but in my opinion I really think the monos are best all around boats. If I can recommend a boat I’d say stay over 40” because you don’t have to worry about choppy water as much as you do in smaller boats. And if possible start off with a stronger boat like carbon fiber or if possible a double thick carbon fiber boat.
@@gen1power102 the group that races by me have 3 classes-- mini 10-17"---- sport 19-28" --- wood 16-20"
I think your fighting the battery weight man...the more crazy you go w higher cells...the worse it gets for the boat size.....makes it not get up on plane and hence will be slower..😢
It was for fun… I’ve got the boat at 60mph on 4s. Thanks for watching.
Was this on the stock flex cable
gr8 video at 3:55 is this just a blower with battery or an air pressure pump like a high pressure?
Yes correct.
Where is this
Looks like a Suppo Heli motor.
Can you use this with NiMH batteries
Why would u want to?
@@daviduruski7848 I live in a heavily wooded area where a fire could spread really easily and my dad doesn’t want me to have LiPOs in the house for that reason because they combust to easily
Go top speed motor brushlesd 500kv