How to Install Wall Tiles | RONA

Поделиться
HTML-код
  • Опубликовано: 23 июл 2013
  • A tiled wall offers many advantages. From installing simple borders to covering half or even the whole wall, maintenance is easy and design possibilities are unlimited. Here, wall tiles are installed in a bathroom.
    Before you start, make sure the wall is covered with moisture-resistant gypsum board and that the surface is smooth and flat. If you're tiling over a painted wall, lightly sand the surface first.
    To purchase wall tiles, calculate the surface area to cover and add a percentage to allow for breakages and spares. Add 5% for tiles laid out in straight lines and 10 to15% for a diagonal layout.
    Tools and materials you'll need:
    • Bucket
    • Caulking gun
    • Ceramic wall tiles
    • Chalk line
    • Grout
    • Grout float
    • Grout sealer
    • Hammer
    • Knee pads
    • Level
    • Masking tape
    • Measuring tape
    • Notched trowel
    • Pencil
    • Plastic tile spacers
    • Protective sheet
    • Pull bar
    • Safety glasses
    • Sanding paper
    • Silicone sealer
    • Sponge
    • Square
    • Tile adhesive
    • Tile cutter
    • Tile edge
    • Tiling tools
    • Working gloves
    Discover the renovation expert within thanks to The Workshop.
    www.rona.ca/en/workshop
    Follow RONA on social media.
    • Facebook - / ronainc
    • Instagram - / rona.ca
    • Pinterest - www.pinterest.ca/ronainc
  • ХоббиХобби

Комментарии • 36

  • @yechihast
    @yechihast 4 года назад +35

    Finally a concise and to-the-point video for installing wall tiles. Thank you.

  • @Bsantana1989
    @Bsantana1989 4 года назад +22

    Rona brought me here to watch a vídeo by RONA🤔

  • @makaras
    @makaras 5 лет назад +5

    Great tutorial, thanks so much

  • @toussantlbisso
    @toussantlbisso 3 года назад +1

    Thank you Rona 👍

  • @JakeNaughtFromStateFarm
    @JakeNaughtFromStateFarm 3 года назад +4

    Good video and quite informative. Seems like a little work, but I think I might be able to handle it. We’ll see.

  • @altrichard4242
    @altrichard4242 Год назад +2

    your a great tile builder

  • @richardhall9473
    @richardhall9473 6 лет назад +6

    Im using ceramic tile this weekend for partial wall and floor where my bathtub is going. I placed 3/4 inch plywood for the flooe and i have mold free drywall for the wall. The mortar is ultraflex 2 which is good for plywood but isbit ok to use with the drywall surface wall? Im trying this for the first time and any help would be appreciated. Thx

  • @Crisis201
    @Crisis201 4 года назад

    Very helpful vid

  • @bradgearly
    @bradgearly 6 лет назад +3

    That's one bathroom project to tackle.

  • @dewkith7428
    @dewkith7428 2 года назад

    I was wonder is the material that you use to connect the tile to the wall is that the same as the drywall wax

  • @snorttroll4379
    @snorttroll4379 3 года назад +1

    What is the wall made of ? what could it be made of? what properties would it have?

  • @gunhatornie
    @gunhatornie Год назад

    The tile wall I've allone decided was best on the wall. How many did we miss?

  • @Samy-hh1wn
    @Samy-hh1wn 3 года назад +4

    Did he apply the tiles over a drywall?

  • @WoWo37
    @WoWo37 6 лет назад +5

    Is there a difference between tile adhesive and tile mortar?

  • @eastlondon6912
    @eastlondon6912 Год назад

    I love how he said finally after about 10 days 🤣 apply the sealant 🤯

  • @monkeydesigner
    @monkeydesigner 5 лет назад +1

    Why didn't they go over how to finish the tile on the floor? Silicone as well?

  • @storker9380
    @storker9380 6 лет назад

    I can use some info im using 4x4 ceramic tiles and the wall behind the bowl is 3 feed, but 8 tile with 1/8 spacing i'm short 1-1/8'' from the other side of the wall. It would had been nice to center the tiles, but again I would leave 1/2 and 1/16 short on both sides, so what can I do? Thanks Lou

  • @henrycodm896
    @henrycodm896 Год назад

    Someone please post a still of that supply list.

  • @guillaumemeloche3420
    @guillaumemeloche3420 7 лет назад +8

    Good video, however the glue used in this video is not meant to put a floor tile on your wall according to Mapei reps. It is highly recommended to use a sticky mortar that you mix yourself like the Rona xpert or Ker121 to add a floor tile to your wall. The premixed tile adhesive will not dry as fast as mortar and could cause you tiles to fall before it dries. the grout demonstration could be better and no one waits 10 days to silicone expansion joints.

    • @bradsanders407
      @bradsanders407 Год назад

      LOL you really hammered em kid but what the hell is "sticky mortar"?

  • @urgentereformaeconstrutora2023
    @urgentereformaeconstrutora2023 2 года назад

    HOW TO PUT CERAMICS ON THE WALL STEP BY STEP

  • @La_abbess
    @La_abbess 3 года назад +3

    Back butter

  • @osmaracosta272
    @osmaracosta272 2 года назад

    You skipped the part you have to scrape the joints

  • @paulbro9377
    @paulbro9377 5 лет назад +3

    Motocross gloves

  • @construcaobrito6678
    @construcaobrito6678 3 года назад

    Chow

  • @amymarkyoung7819
    @amymarkyoung7819 8 лет назад

    Tankless water heat

  • @420bars
    @420bars 7 лет назад

    Hu?

  • @sherrylkeith9695
    @sherrylkeith9695 3 года назад

    I did it myself thanks to Woodprix.

  • @shamakanojia5485
    @shamakanojia5485 5 лет назад

    Llp

  • @SETIBETI
    @SETIBETI 5 лет назад +2

    So so wrong

  • @RixMilne
    @RixMilne 8 лет назад

    Making your home 'Fit to Sell' if you need help, call me for a FREE home appraisal.

  • @paulzapol9840
    @paulzapol9840 4 года назад +2

    This is a terrible video.