I started a new bath and beauty business. It is so stressful teaching yourself how to do everything. If it weren't for people like you to teach others so they don't have to spend so much time learning by mistake, I would have already stopped. Thank you so much for sharing. I went through the steps as you were teaching them and it was perfect. Thank you again!!!
Mind blown 🤯 I’ve been printing two different pages and gluing them together for a few years, if only I had seen this video sooner!! Such a clever idea!!
This was exactly what I was looking for. I was trying to figure out how to get the cut lines to match and you moving the second page over was perfect. Thanks so much for sharing 😊
if you're still looking for a better way to align your cards, I like to enter the x and y axis coordinates so I know they're exact instead of shifting them around.
I'm starting my own sticker business this year and this was the first video that made it look easy to understand how to line everything up for business cards ❤
Thank you so much! You did such an excellent job at explaining everything without the video being too long & wordy! It was perfect 🤩 thanks girl! Bee 🐝 blessed much love & light
Thank you so much for this video. I do not usually do business cards, but my daughter asked me for some. With your helpful video (part 1 & 2), I was successful. Thank you again!
hey! one thing that helps it go faster is when duplicating you can click on what you want to duplicate and hold down the option button and then use your finger on the keypad and slide to duplicate. also as you are pressing the option button to duplicate also hold down the shift button and it aligns the stuff you duplicated so its easier. this helps you not have to use the align tool every time!
Might need to run your cricut through a calibration... I noticed it missed the cut just a tad. The calibration could fix that. Your video really helped me so I'm sharing the 1 thing I know. Lol
Hi, whenever I click make I never have the full black square around my design like yours does, only the corners that the Cricut scans. I can't shift everything to the right side because of this, how do you get the black line / square around the ewhole design?
I'm watching this 2 years later, and this IS the best business card video, and so simple. I don't need to go anywhere else. Thank you for your time and help along our making journey.
Hi , ahhh well I keep printing over and over ..my stuff is either too high or too low .. when I got an actual one that printed good I think it reset placement… not sure
GAVE ME THE EXTRA PUSH THAT I NEEDED TO GET IT RIGHT!! I FIND IT EASIER TO GROUP THE IMAGES CENTERED, THAN PUT IT ON THE SQUARE, THAN ATTACH EACH SIDE... MAKES IT EXACT POSITIONING!
You don't need to manually align things for design space if there's multiple. Just copy and paste as many as you want and when it goes to review it will automatically align them even if on your design space layout they're overlapping as they do when you paste over and over.
I do this for print and cut. There's literally Zero alignment of your designs required, as long as you've got the even number of 10 per side or whatever it is they'll align automatically every time
Hey, if I use plain cardstock paper (white) does the color already come when using a colored design? Or have to buy something in specific for the business cards to come with color?
This was a great breakdown, I’ll still learning on my end unfortunately everything didn’t come out as it should. Do you know how to change the printer to print in color or will you go in settings.? Mine printed in black and white.
You can adjust the size by unlocking the second page and adjust the size then lock it again so you dont accidentally ruin the size you designate for them
My canva is black not white, and the left side of your screen is on the bottom for me. No option to align the cards for me. I’m so frustrated, not sure what to do!
Thank you so much for this video. I was over paying ppl to do something I know I can do at home. Question where do you get the paper to make your business cards?
everything is aligned and perfect until the printing process. even when i move one side to the upper right hand corner and leave the other side where it is, it doesn’t line up. and then if, by a miracle, it does like up, the cricut cuts it unevenly. in serious need of help 😭
you are not doing the alignment correctly. if you keep using align to top or bottom it It will never really alinge across the board. I would make sure they are on the same grid line both vertical and horizontal line from the beginning
I find the title of touch’s video annoying. I know you can print with some Cricut and I’m just trying to find a video that does this on card. All these videos talk of printing with Cricut and then use a separate printer.🙈
It honestly took me all day of researching to discover it doesn’t print. For some reason I thought the latest versions did! My bad! 🙈 Thank you! I’ve ordered a printer.x
That little hack for printing the second side is EXACTLY what I needed. Thank you!!
I started a new bath and beauty business. It is so stressful teaching yourself how to do everything. If it weren't for people like you to teach others so they don't have to spend so much time learning by mistake, I would have already stopped. Thank you so much for sharing. I went through the steps as you were teaching them and it was perfect. Thank you again!!!
What printer are you using? For some reason I keep doing everything correctly but it still prints a inch off
@@savannah6378 Older model HP Officejet Pro 6830.
You got this!
@@savannah6378 ох у меня та же проблема
Mind blown 🤯 I’ve been printing two different pages and gluing them together for a few years, if only I had seen this video sooner!! Such a clever idea!!
Glad I could help !
This was exactly what I was looking for. I was trying to figure out how to get the cut lines to match and you moving the second page over was perfect. Thanks so much for sharing 😊
glad it was helpful!
Thank you for this video. I couldn't find easy instructions to follow like yours.
if you're still looking for a better way to align your cards, I like to enter the x and y axis coordinates so I know they're exact instead of shifting them around.
Wow. Thanks for the tips! I will try it out
Me too! I got tired of guesstimating!
@@pln4679 see
How does one do this?
I'm starting my own sticker business this year and this was the first video that made it look easy to understand how to line everything up for business cards ❤
awesome! glad to hear it
You did a great job talking us through ! Thank you!
thank you so much!
Thank you for this! I have an event this weekend and I didn't realize I was out of cards! This was so helpful.
Awesome! Glad to hear it ! Thank u for watching 💕
Does the color already come when using a colored design or have to buy something in specific for the color to come out?
Thank you so much! You did such an excellent job at explaining everything without the video being too long & wordy! It was perfect 🤩 thanks girl!
Bee 🐝 blessed much love & light
Glad it was helpful! Thanks for watching !
Thank you so much for this video. I do not usually do business cards, but my daughter asked me for some. With your helpful video (part 1 & 2), I was successful. Thank you again!
I've watched a couple videos on this and i couldn't figure it out until now... Thanks:)
Glad I could help!
Brilliant! I had no idea I could do this with my cricut. Thanks a ton.
hey! one thing that helps it go faster is when duplicating you can click on what you want to duplicate and hold down the option button and then use your finger on the keypad and slide to duplicate. also as you are pressing the option button to duplicate also hold down the shift button and it aligns the stuff you duplicated so its easier. this helps you not have to use the align tool every time!
Thanks so much ! I'll try it
Im literally going to try this tonight!! Thank you so much for uploading this your a Star 🌟😊
Hope you enjoy it! you're so welcome!
Exactly what I needed! Thank you so much! xxx
glad to help!
AWESOME!! Thank you SOOO much for sharing, this is exactly what I was looking for!!!
Thank you so much! this video is so helpfull! Can i ask what kind of cricut you have?
Much thanks from the Netherlands!
Thank you SO VERY much for doing this!!!!!!
You are so welcome!
Thank you sooooo much. This was very helpful
I'm so glad it helped !
Your business card is super cute
Thank you I’m trying to learn so I can help
My friend with her Small business
Best of luck!
this was super helpful! Thanks a looooot!
thanks for watching!
Thank you for this video!!!
You are so welcome!
This was extremely helpful! Thank you so much for this video!
Thank you so much for this tutorial! It was easy to follow the steps and institutions were accurate!!
Of course. Glad it helped !
Life Saver!! Thanks!
😊
Might need to run your cricut through a calibration... I noticed it missed the cut just a tad. The calibration could fix that. Your video really helped me so I'm sharing the 1 thing I know. Lol
Thank you! ❤❤❤
You're welcome 😊
Awesome tutorial! Thanks so much 🙏🏽
I’m here from Tiktok😁love your videos
Thanks so much ! 🙏
I am so glad you did this, thanks so much!!!
You are so welcome!
Hi, whenever I click make I never have the full black square around my design like yours does, only the corners that the Cricut scans. I can't shift everything to the right side because of this, how do you get the black line / square around the ewhole design?
i believe that's because cricut updated and does the outlines different. ill make an updated video soon
Thank you !!!
You're welcome!
This is super helpful! Thank you!
Hello did you used normal ink cardiges or sublimation colors? thanks
Normal ink with HP printer
@@SillyCrafting101 thanks 🙏
I'm watching this 2 years later, and this IS the best business card video, and so simple. I don't need to go anywhere else. Thank you for your time and help along our making journey.
im glad. about to do an updated video soon
Hi , ahhh well I keep printing over and over ..my stuff is either too high or too low .. when I got an actual one that printed good I think it reset placement… not sure
alignment is always tricky. maybe try adding a bleed when printing?
Does it matter the kind of printer I get ? I have a canon and my cards come out dull
i use an HP but it shouldnt matter
GAVE ME THE EXTRA PUSH THAT I NEEDED TO GET IT RIGHT!! I FIND IT EASIER TO GROUP THE IMAGES CENTERED, THAN PUT IT ON THE SQUARE, THAN ATTACH EACH SIDE... MAKES IT EXACT POSITIONING!
thank you! i will give it try
Thank you so very much😊🙏🏽🙏🏽
Wow. Thanks ☺️ 😮
You're welcome 😊
OHHHHHHHHH. Good thinking
I would resize both of them together at the very start so they will be the same size the whole time.
Thanks so much I was trying to make Thank You cards and didnt want to have to pay to have them printed
You don't need to manually align things for design space if there's multiple. Just copy and paste as many as you want and when it goes to review it will automatically align them even if on your design space layout they're overlapping as they do when you paste over and over.
I do this for print and cut. There's literally Zero alignment of your designs required, as long as you've got the even number of 10 per side or whatever it is they'll align automatically every time
the alignment here is for the purpose of mirroring the front and back of the page. i see what you mean tho. i'll try it in my next video. thank you!
I do exactly the same thing and is off ong idk what to do
what kind of cardstock did you use?
80lb cardstock. linked in description
Hi, I can’t move the paper on the mats to print on one corner and the second page on the other corner 😢
oh no :( maybe save your project and reopen the system?
Please what type of paper was used?
80lb cardstock. Link in description
Hey, if I use plain cardstock paper (white) does the color already come when using a colored design? Or have to buy something in specific for the business cards to come with color?
need colored printer ink
What kind of paper can be used?
80lb cardstock
Thanks so much
You're welcome!
you are awesome
thank you!!!!!!
thanks for watching!
This was a great breakdown, I’ll still learning on my end unfortunately everything didn’t come out as it should. Do you know how to change the printer to print in color or will you go in settings.? Mine printed in black and white.
i use system dialogs in the printer
Does anyone else notice that the 2nd page is always off by 1/4 inch or more, even when you do it this way?
Are u moving the 2nd page to the opposite side ?
@@SillyCrafting101 how do you that? Im habing the same issue 🥲
@@deepeebb click, hold and drag
experiencing
this same issue and its driving me nuts
You can adjust the size by unlocking the second page and adjust the size then lock it again so you dont accidentally ruin the size you designate for them
It’s all good until I get to the cutting part. My cricut keeps trying to cut the letters out instead of the rectangle? Any tips?
Make sure you are flattening with a solid shape in the back
what is the cost for each card, paper plus equipment? thx.
Links of what I use in the description. Your welcome to do the math
My canva is black not white, and the left side of your screen is on the bottom for me. No option to align the cards for me. I’m so frustrated, not sure what to do!
Sorry. Haven't seen that before. 😕
Thank you much ❤this tutorial is so easy and short…something was looking for the past two years 😢
Glad it was helpful!
wow. Amazing
You are so kind
How did the ink not peel from the bottom side of the cards???
ive never seen ink peel before
@@SillyCrafting101 it seems to happen to glossy cardstock. Matte not so much
What kind of paper did you use for business cards
carldstock
Where did you buy the card cutting machine?
amazon. link in amazon storefront
Thank you so much for this video. I was over paying ppl to do something I know I can do at home. Question where do you get the paper to make your business cards?
From Amazon. Link in description
which printer you using ?
hp envy. in description
Wow!
This was so helpful! Thank you so much.
If I do a thank you business card. How do I get the design on the back of the card.
I showed that in my tutorial. Print on both sides of the paper
What kind of paper did you use?
Link is in the description below. It's the 80lb white cardstock
Here to support with subscription
thanks so much!
Hi!! What paper did you use?
80lb cardstock
How or where to get the software?
Canva and cricut desig space are free online
Can't figure how to move page after you click make it
Click, hold and drag
You need to put the first part in the bio
It is
I’m still having problems and doing exactly what you say 😢
yes
everything is aligned and perfect until the printing process. even when i move one side to the upper right hand corner and leave the other side where it is, it doesn’t line up. and then if, by a miracle, it does like up, the cricut cuts it unevenly. in serious need of help 😭
I have the same problem - the black border lines done match up.
Same for me
@@nicolekallend561 Me too. Back is not centered.
@@bdbostonI'm sorry to say that I gave up and had them printed professionally. I hope you manage to find a way!
Thank goodness for pause & reverse …
the fact that i searched this up for lash aftercare/loyalty cards i made on canva 😂
you are not doing the alignment correctly. if you keep using align to top or bottom it It will never really alinge across the board. I would make sure they are on the same grid line both vertical and horizontal line from the beginning
Thank you for the tips !
Thank for all your trouble
My text keeps trying to get cut 😭
Are you flattening?
DIY 📇
I LOVE YOU KING OF THE WORLD SIR AMAMRA SAID THANK YOU SEE THAN.
thx for moving on and not telling us how open cricut
It's soo off
Trial and error
I find the title of touch’s video annoying. I know you can print with some Cricut and I’m just trying to find a video that does this on card. All these videos talk of printing with Cricut and then use a separate printer.🙈
The cricut is a cutting machine. It does NOT print. If u do a print and cut feature, u have to print with a separate printer.
It honestly took me all day of researching to discover it doesn’t print. For some reason I thought the latest versions did! My bad! 🙈 Thank you! I’ve ordered a printer.x
@Tammi Preece it would be cool if the cricut could do both. Maybe one day lol. No problem. Here to help !