Nice, In the states I would suggest buying a $3 Styrofoam cooler and skipping to 2:00 to save some time, then retrofitting things in from there. Pretty cool and great idea, Thanks!
Love it, and I'll make one, but much room for improvement... Inside should hold 6-pack of full size (Guinness-sized) cans. Also make back, middle, and bottom 2 layers of foam. Fan should blow into the heatsink (more air turbulence for better heat extraction). Maybe add a tiny fan on cold heatsink for internal air circulation (faster cooling of warm items and after door has been opened; turn off when door is open). With fans on heatsinks, the fin density can be much higher (and longer fins may help too... look at heatsinks for PC µP's). Smaller heatsink sized hole for middle layer between small cold heatsink and large hot one. The 2nd middle foam layer should have large heatsink sized hole with space for air to escape bottom of fins. Add a small foam ring around upper area of large heatsink so air must flow through and out bottom of heatsink. Door should cover the lower middle foam sheet. Add a foam piece inset in front of the fan, so air can only escape out louvers. Upper outer panel should cover upper middle foam sheet. Now the door could almost be full height, with just the smallest panel to hold the readout. Top vent louvers should face away from user. Better yet, mount Peltier at inside top back and blow heat out the back, and include an air escape channel in the top of the 2nd back foam layer so hot air can escape when the fridge is against a wall. Use a "pocket handle" to minimize the overall depth (might need a small foam block at the top behind that so there's 4cm everywhere). Use 18650 LiFePO4 batteries. Run electronics at 12V so you can power it in your car or boat (may need DC-DC buck supply to run things) . Add a USB port so you can charge devices as well!
I try to buy those things on shopping malls and hardware but thet don't have any of it... So I have to suggest an effective thing wich is to buy ONLINE shops, where you can find legit and cheap things about the stores who are selling it...
Where did you get the fan along with the wires and metal, part of the fridge that actually keeps things cool? I’m trying to make something similar for my project. Thanks for the vid! Please reply!
THERMOCOL SHEET amzn.to/2VDjUm8 HEAT SINC, fan,module amzn.to/2JthZgC 12V DC FAN amzn.to/2v3uLda PELTIER MODULE amzn.to/2D9ENhF THERMAL PAST amzn.to/2U9l47f DIGITAL THERMO METER amzn.to/2UPFvdL
Here it is rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338567268&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F12V-60W-Fridge-Refrigeration-Fast-Cooling-System-DIY-Kit-Mini-Air-Conditioner%2F173952705600%3Fhash%3Ditem288063a440%3Ag%3AyYgAAOSwEkJdHIKu
Okay..so this is awesome I tried making this because whenever i tried buying one it was toooo expensive I made one with cardboard but it got soggy and wet But now the styrofoam one is awesome!!!
Very Nice idea🤩, I too want to make it , but the kit link you have give in description is not deliverable to India😔😔 Can you make a video in which how can we make a refrigeration kit.
Hi we are making a fridge like this for our senior project and we are adding wheels Handel and solar panel on it. What are the heat calculations for your fridge if you have any? also what is your opinion on our project? do you think that us adding innovations like this to the fridge will further improve it? And finally do you think it´ll be possible to add a solar panel to it?
THERMOCOL SHEET amzn.to/2VDjUm8 HEAT SINC, fan,module amzn.to/2JthZgC 12V DC FAN amzn.to/2v3uLda PELTIER MODULE amzn.to/2D9ENhF THERMAL PAST amzn.to/2U9l47f DIGITAL THERMO METER amzn.to/2UPFvdL
Such a good tutorial video, I appreciate it. But unfortunately, you didn't mention all of those components/materials, so tbh it's kinda useless for the viewers.
@@y_azizi2194 today I'm making this cool project... I have all the requirements such things I listed... You're welcome for giving thanks with my reply, i hope it might helped you to find those things,..
@@EssaGamer yes, it works but my project only stands for about 6hours, system might be overheat or lose for a longer period of time... My project was example only for school model project,. So I will not allow to use as a Mini Refrigerator just like Home appliances...
All it seems to be is a styrofoam casing with a heat sink usually used for computers, along with an AC/DC adapter for an electrical outlet to power the heat sink and LED light and some wood, handle, and a few hinges to make it more convenient. It's a pretty simple design really but effective and easier to make them other heat sinks in a conventional fridge or AC unit
@@johnnyxthemacnifient5333 Tec-12706 is the cooling unit, which is a max 6A. I would not use just 1, because then you will need to run it with high voltage and that is not good. Best would be to use 2x12706 stacked at 5volts. It will use about 7watts/1.4A, so in 2xstacked setup only about 15watts/2.8A. With this setup you can go 42degrees under ambient temperature, i have reached -24 celsius and room temperature 18c with this. In a 6litre box, like this guy has in hes video, it would easily go under 0 celsius. All in all, do not use high voltages, best for small fridges are Peltiers that have max voltage of 8.5v, then you can use them at 5volts for VERY good results with very low watts used. Here is a place where i get my current modules: www.electron.com/peltier-modules-c374/
I have a question, I assume that the batteries are for the fan and the plug 12v is for the cooling device, is it possible to connect the fan to the 12v plug with the cooling device? And can you put a button to turn off and on when needed? ( My project does not require to be always on and it would be cool to have a button).
All it seems to be is a styrofoam casing with a heat sink usually used for computers, along with an AC/DC adapter for an electrical outlet to power the heat sink and LED light and some wood, handle, and a few hinges to make it more convenient. It's a pretty simple design really but effective and easier to make them other heat sinks in a conventional fridge or AC unit
Hlw sir its really good pr aapne ne material kay usee kiya hh usko description me kuy nhi diyaaa Kay fayada dekhne se agar hm sahi chjj buy na kar laye or use na kar paye toh
Your video is really nice but you didn't provide materials name in description what was the benefits of seeing this video when you are not providing details and material about your video
then add more power, you can use 2 or 4 elements, but they need a lot of power ~120W per module. But on the other hand a real refridgiator needs 900W when the compressor is running. You can use a PC-powersuply to power 3-4 petier modules (see YT, connect green cable to black and its starts without a mainboar.)
@@hyperhektor7733 Smart people does not use them at 12volts... 5volts is the way to go, if you want to make fridge and use only 20-30wats and still reach very low temperatures. This way you can easily use Phone chargers. USB or Power banks to power up your fridge. I am using 3x12706, using only 30wats and reach steady -28celcius measured on top of Peltier unit.
@@hyperhektor7733 Not sure what you mean, in this video there was no timer for cooling 1L of water and i have not done that test either. But you can tell us all what is a good time to cool 1L to 7celcius?.. All i know is that even the good CPU coolers today have hard time dissipating the heat from 12706 unit when you run it at 12volts. My current setup keeps the warm site only +1celcius over the room temperature, when room is at 20-22celcius. And i am using a 300 tdp cooler. btw: did you say before that real refrigerator uses 900W?!? Also you are saying that 12706 module uses 120W when running at 12volts, that is also wrong information, it uses about 72W.
I agree but it's definitely better than the 10 year old royalty free music that other channels like this one use. maybe one day we can get a channel that just does not use any music, just peace and quiet.
Oh believe me, this video originally had different background music that was much more cheery and upbeat; you can still hear it in another video by Mr Useful: ruclips.net/video/xn5DZ1XXarA/видео.html
I need a small fridge right now I moved into a new house that have no fridge I have no supply's to make a small fridge and my family is so broke right now I'm so thirsty I want water
THERMOCOL SHEET amzn.to/2VDjUm8 HEAT SINC, fan,module amzn.to/2USVEzk 12V DC FAN amzn.to/2v3uLda PELTIER MODULE amzn.to/2D9ENhF THERMAL PAST amzn.to/2U9l47f DIGITAL THERMO METER amzn.to/2UPFvdL
*Get the refrigeration Kit = **amzn.to/3oOPLOT*
*Mini Digital Thermometer = **amzn.to/2KtMUMA*
*Foam used in the video = **amzn.to/2KqoALe*
ভাইয়া তুমি আমাকে ফ্রিজ বানিয়ে দাও
@Malakai Kaden Tu firse🤣🤣mere bandi ko hack mar
@Malakai Kaden Tu firse🤣🤣mere bandi ko hack mar
Can u list down the all components u use??
.
0@
My parents would never let me buy one and now 5 long years later I can make it myself
Me to same bro
Did you make it?
that one I’m actually building it right now just need a couple of more parts and I’ll be finished
@@doggowitskimask385 I'm ordering items right now 👍
Same
can you make a mini desktop freezer next? a mini freezer that can store frozen goods like ice cream. thanks
I think you can just put more peltier modules
Nice, In the states I would suggest buying a $3 Styrofoam cooler and skipping to 2:00 to save some time, then retrofitting things in from there. Pretty cool and great idea, Thanks!
yeah thats what im doing, buying a styrofoam cooler and put the cooling components.
That is well made and looks pretty cool. Nice work!
Can you made this for me I will pay to you all cost of materials
For anyone wondering, the kit used here: Thermoelectric Peltier TEC1-12706 Cooler Kit. Please write detailed descriptions @Mr Useful
Nice one guy 👌🏽
Bro the refrigeration kit alone is more expensive than buying the actual thing
It's just 200
Craftsmanship is better and more opportunities for upgrades
normal mini fridge this size is like $50
Love it, and I'll make one, but much room for improvement... Inside should hold 6-pack of full size (Guinness-sized) cans. Also make back, middle, and bottom 2 layers of foam. Fan should blow into the heatsink (more air turbulence for better heat extraction). Maybe add a tiny fan on cold heatsink for internal air circulation (faster cooling of warm items and after door has been opened; turn off when door is open). With fans on heatsinks, the fin density can be much higher (and longer fins may help too... look at heatsinks for PC µP's). Smaller heatsink sized hole for middle layer between small cold heatsink and large hot one. The 2nd middle foam layer should have large heatsink sized hole with space for air to escape bottom of fins. Add a small foam ring around upper area of large heatsink so air must flow through and out bottom of heatsink. Door should cover the lower middle foam sheet. Add a foam piece inset in front of the fan, so air can only escape out louvers. Upper outer panel should cover upper middle foam sheet. Now the door could almost be full height, with just the smallest panel to hold the readout. Top vent louvers should face away from user. Better yet, mount Peltier at inside top back and blow heat out the back, and include an air escape channel in the top of the 2nd back foam layer so hot air can escape when the fridge is against a wall. Use a "pocket handle" to minimize the overall depth (might need a small foam block at the top behind that so there's 4cm everywhere). Use 18650 LiFePO4 batteries. Run electronics at 12V so you can power it in your car or boat (may need DC-DC buck supply to run things) . Add a USB port so you can charge devices as well!
Legends who are watching after 5 years
Yes I am
Where to buy these all ingridents
I try to buy those things on shopping malls and hardware but thet don't have any of it... So I have to suggest an effective thing wich is to buy ONLINE shops, where you can find legit and cheap things about the stores who are selling it...
@@nogheelucido9518 you can get it into www.electronicscomp.com/ (cheap)
ebay?😂
@@anwitodas2447 what are these devices called?
@@abhinavkosta5256 peltier modules
I loved it i and my friend are planing on one because we are mechanical engenniers
Where did you get the fan along with the wires and metal, part of the fridge that actually keeps things cool? I’m trying to make something similar for my project. Thanks for the vid! Please reply!
THERMOCOL SHEET amzn.to/2VDjUm8
HEAT SINC, fan,module amzn.to/2JthZgC
12V DC FAN amzn.to/2v3uLda
PELTIER MODULE amzn.to/2D9ENhF
THERMAL PAST amzn.to/2U9l47f
DIGITAL THERMO METER amzn.to/2UPFvdL
Here it is rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338567268&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F12V-60W-Fridge-Refrigeration-Fast-Cooling-System-DIY-Kit-Mini-Air-Conditioner%2F173952705600%3Fhash%3Ditem288063a440%3Ag%3AyYgAAOSwEkJdHIKu
Your refrigerator look more attractive and also good for cooling food
Okay..so this is awesome
I tried making this because whenever i tried buying one it was toooo expensive
I made one with cardboard but it got soggy and wet
But now the styrofoam one is awesome!!!
Planning to make this as well, how well did it hold up in the past months ?
Very Nice idea🤩, I too want to make it , but the kit link you have give in description is not deliverable to India😔😔
Can you make a video in which how can we make a refrigeration kit.
what do u use as a cooler
I need it for my Final exam
Please tell me
Btw I love your videos helps me a lot and i am your biggest fan
Search on ali or ebay for 'peltier cooling module' and you will have an inmense amount of choice.
It's just a heat sink
Hello, Amazing diy. Can i know which glue are you using??
Pro really work aaugma pro
Hi we are making a fridge like this for our senior project and we are adding wheels Handel and solar panel on it. What are the heat calculations for your fridge if you have any? also what is your opinion on our project? do you think that us adding innovations like this to the fridge will further improve it? And finally do you think it´ll be possible to add a solar panel to it?
how did it go?
Your gonna need some expensive panels that are HUGE it can still cool 2 to 5 degrees but yeah to preserve things you need better panels
Materials
1: yaboo.pl/product-pol-2409-Zestaw-chlodzenia-do-ogniwa-Peltiera-TEC1-12706.html?
2:
botland.com.pl/pl/ogniwa-peltiera/10024-radiator-z-wentylatorem-92mm-dla-ogniwa-peltiera-40mm.html
Thanks
@@lordkruszwil-informacje2445 adklvr cmdkruy ldhrity
Cool😱😱😱😱😱 You earned a new subscriber!!! But please give me the list of the material needed in reply. Plzzzzzzzzzz.......
tec-12706(or higher 127xx)
peltier kit system(tec might included)
power supply 12v
Styrofoam
digital lcd thermometer
less than $30 in my country
THERMOCOL SHEET amzn.to/2VDjUm8
HEAT SINC, fan,module amzn.to/2JthZgC
12V DC FAN amzn.to/2v3uLda
PELTIER MODULE amzn.to/2D9ENhF
THERMAL PAST amzn.to/2U9l47f
DIGITAL THERMO METER amzn.to/2UPFvdL
Where Can i Get The Cooling pack???
That's not a cooling pack its a heat sink usually made for computers, they're really easy to find on Amazon, eBay, and most electronic stores
Hii bro ur creation is awesome but name the components required so that we can also try it plz...
Such a good tutorial video, I appreciate it. But unfortunately, you didn't mention all of those components/materials, so tbh it's kinda useless for the viewers.
Things used...
Styro Foam
TEC 12706
Small/Big Heatsink
Thermal Paste
12volts 1A Small/Big CPU Fan
12Volts supply
@@nogheelucido9518 thankyou so much
@@y_azizi2194 today I'm making this cool project... I have all the requirements such things I listed... You're welcome for giving thanks with my reply, i hope it might helped you to find those things,..
Noghee Lucido did it work?
@@EssaGamer yes, it works but my project only stands for about 6hours, system might be overheat or lose for a longer period of time... My project was example only for school model project,.
So I will not allow to use as a Mini Refrigerator just like Home appliances...
I like the music❤️
Super super super super work..nice demo..nice video... congrats to you sir
I made it 4 months ago itz good
Please can u tell me the name of all parts???
Nice refrigerator ♥️♥️♥️😄😄😄😎😎😎🙏🙏🙏
Dada parts gulo kothai pabo.....
Name gulo bolle khub valo hoto....
Amazon a search korte paro peltier
Thank you.
Very nice demonstration.... congratulations to you sir for this video uploaded
Do you have a link to the components used. I would like to do this protect.
project *
@@thebigbangtheorysheldon9430 Sorry, Auto correct.
What mean by auto correct
@@gampavishwaprasad2846 My phone thought I wanted to type Protect when I actually wanted to type project.
@@Apollo_Vanron it happens with me too but now I've disabled autocorrect
Please tell me The name of all the things which is used in this project
All it seems to be is a styrofoam casing with a heat sink usually used for computers, along with an AC/DC adapter for an electrical outlet to power the heat sink and LED light and some wood, handle, and a few hinges to make it more convenient. It's a pretty simple design really but effective and easier to make them other heat sinks in a conventional fridge or AC unit
yes
@@skeletorbishop7470 what's the heat sink unit called as?
Hey what are the names of those components ?
year thats waht i don't understand.. people want' to make tech videos, but do not say what components or where to buy them ..??
@@johnnyxthemacnifient5333 Tec-12706 is the cooling unit, which is a max 6A. I would not use just 1, because then you will need to run it with high voltage and that is not good. Best would be to use 2x12706 stacked at 5volts. It will use about 7watts/1.4A, so in 2xstacked setup only about 15watts/2.8A. With this setup you can go 42degrees under ambient temperature, i have reached -24 celsius and room temperature 18c with this. In a 6litre box, like this guy has in hes video, it would easily go under 0 celsius. All in all, do not use high voltages, best for small fridges are Peltiers that have max voltage of 8.5v, then you can use them at 5volts for VERY good results with very low watts used. Here is a place where i get my current modules: www.electron.com/peltier-modules-c374/
Engineering students bout to go crazy with this one
Where to buy these all ingridents kitne ka hai ya sab things ka nam Kya hai kaise use hoga
Any one whaching from 2024🤨
Me
can i turn this on as like regular freeze 24/7? or i have to turn it off after few hours later?
could i use wood instead of foam aswell?
no, it wouldnt keep cold you need the foam to make it stay cold or it would just be a waste right now its $17
What a wonderful model fridge
What are the items or the materials
hello
can you please help me with the names of the materials you have used in 2.42
2:42
The materials are available on Amazon or not.. or from where should I buy these things
Kaustubh kaib Amazon has these products
A sincere thank you for this video. This gave me exactly what I needed to solve a very serious problem that I had.
Bahai apne kitna mast banaya ise me science exhibition me banauga
Cool :)
Liked!!!!!
I have a question, I assume that the batteries are for the fan and the plug 12v is for the cooling device, is it possible to connect the fan to the 12v plug with the cooling device? And can you put a button to turn off and on when needed? ( My project does not require to be always on and it would be cool to have a button).
List of material please reply
Materials
1: yaboo.pl/product-pol-2409-Zestaw-chlodzenia-do-ogniwa-Peltiera-TEC1-12706.html?
2:
botland.com.pl/pl/ogniwa-peltiera/10024-radiator-z-wentylatorem-92mm-dla-ogniwa-peltiera-40mm.html
1. foam
2. pelteir ( link for buy--- amzn.to/2KZPauO )
1. Thermoelectric Cooler
2. Aluminium Heat Sink
3. Cooling Fan
4. Thermal Paste
Thank You!
How many rupeese
@@majsterkowicz4003
P
I will try to make it
How much time do it take to be cool?
Awesome dude
Dale Like si lo miras y lo Haces 👍❤❤
Nice. I wonder if i can make it out of dehumidifier?
looks nice, wonder what it would look like with the aid of a 3d printer
It is very usefull
What specific material to be used for the power source
Female port and 12v 2A adapter
Where to buy all material pls pls pls bataiye.... Tabhi hm sab subscribe karenge..ha.haha..
Boss
৪ ফুট by ২ ফুট একটা বক্সে জদি ৪ টা পিল্টিয়ার কুলার প্লেট দিয়ে একটা ফ্রিজ তৈরি করি তাহলে কি মাছ বা সবজি রাখা জাবে plg জানাবেন।
ans plg
Hello...I want to made this mini fridge. Please send me this all products links/ names.
All it seems to be is a styrofoam casing with a heat sink usually used for computers, along with an AC/DC adapter for an electrical outlet to power the heat sink and LED light and some wood, handle, and a few hinges to make it more convenient. It's a pretty simple design really but effective and easier to make them other heat sinks in a conventional fridge or AC unit
Ya kun sa set lagaya aap na
Sir. What are the instrument use in refregirator
If you mean the cooling mechanism its a heat sink that you can find on Amazon or most electronic stores
@@skeletorbishop7470 it's not only a heatsink there's also the peltier module...Usually comes in a set with heatsink etc
Great thanks
love it
Hlw sir its really good pr aapne ne material kay usee kiya hh usko description me kuy nhi diyaaa
Kay fayada dekhne se agar hm sahi chjj buy na kar laye or use na kar paye toh
Usko hindi nahi aati
@@erenyeager8437
Thnks for the informing me
Your video is really nice but you didn't provide materials name in description what was the benefits of seeing this video when you are not providing details and material about your video
@@ranjanshashi4417 wlc
nice idea from good men
Can you give the links of the components used ?
Very nice send more videos like the
So you got it down to about 47F. Not cold enough for milk, but useful.
then add more power, you can use 2 or 4 elements, but they need a lot of power ~120W per module. But on the other hand a real refridgiator needs 900W when the compressor is running.
You can use a PC-powersuply to power 3-4 petier modules (see YT, connect green cable to black and its starts without a mainboar.)
tron3entertainment uyfurh
@@hyperhektor7733 Smart people does not use them at 12volts... 5volts is the way to go, if you want to make fridge and use only 20-30wats and still reach very low temperatures. This way you can easily use Phone chargers. USB or Power banks to power up your fridge. I am using 3x12706, using only 30wats and reach steady -28celcius measured on top of Peltier unit.
@@Ruube1978 but how much time do you need for how much liter of water? physics cant be tricked sadly :)
@@hyperhektor7733 Not sure what you mean, in this video there was no timer for cooling 1L of water and i have not done that test either. But you can tell us all what is a good time to cool 1L to 7celcius?.. All i know is that even the good CPU coolers today have hard time dissipating the heat from 12706 unit when you run it at 12volts. My current setup keeps the warm site only +1celcius over the room temperature, when room is at 20-22celcius. And i am using a 300 tdp cooler. btw: did you say before that real refrigerator uses 900W?!? Also you are saying that 12706 module uses 120W when running at 12volts, that is also wrong information, it uses about 72W.
This classical music is kind of pissing me off
NickDerMitHut
I agree, I would have preferred death metal
I agree but it's definitely better than the 10 year old royalty free music that other channels like this one use. maybe one day we can get a channel that just does not use any music, just peace and quiet.
Oh believe me, this video originally had different background music that was much more cheery and upbeat; you can still hear it in another video by Mr Useful: ruclips.net/video/xn5DZ1XXarA/видео.html
I was thinking the same thing. It is sooooo annoying.
Ek number mans 👆👆😋😋 wonderful
but the way finally i remember about music background "tom and jerry" 😅😅👍👍👍👍
Super iam love it
Which things you use
This will never cool it down this much lol😂
Sir can u plz tell the value of voltage and current of power adaptor
Amazing nice
Please can I know the components used, I want to make one because buying the kit is expensive
how much time it takes to go to minimum temperature?
this refrigerator:like
xbox series x refrigerator:comment
Bhaut hard Bhaut hard very good
What are the items. Please reply
Heat sink with fans
12v 6 amp power supply
Thermocol
Thermocol paste
Peltier module
@@bsbharat0705 kha milega yeh parts
What is volt and amp of this Charger? please reply
12volt
2amp
@@roman60082 hero
In 6:53 time in vedio can u tell me what is that blue colour thing in side of refrigerator
Cool! Materials for the fridge please 👍
Amezing bhai
List of material please tell
I need a small fridge right now I moved into a new house that have no fridge I have no supply's to make a small fridge and my family is so broke right now I'm so thirsty I want water
I want to buy these products. Where will I get these? Please give me the links..
Nice
How long does it take to decrease the temperature by 1 degree ?
Omg.. I want this badly
This is extremely fantastic
this is awesome, now i have a concept of what i can use with my knowledge of free energy magnetic generators
Wo boxx me Kon si machine lai thi aapne
Could you show a list of materials plz?
look at thermoelectric peltier WWW.AMAZON.IN
THERMOCOL SHEET amzn.to/2VDjUm8
HEAT SINC, fan,module amzn.to/2USVEzk
12V DC FAN amzn.to/2v3uLda
PELTIER MODULE amzn.to/2D9ENhF
THERMAL PAST amzn.to/2U9l47f
DIGITAL THERMO METER amzn.to/2UPFvdL
Give a product buy link please
Hello, can we order that refrigerator parts in flip kart? If yes then, what will be the name of the parts?😊...
I want to try it...!
www.amazon.ca/gp/product/B07M8PJP7X/ref=ox_sc_act_title_1?smid=AJOOAX79OUIW7&psc=1
Bhai ye toh ban gya but esko supply kitna 'A' & 'V' dena jisse temp. 0•c ho jaye
Please mention required things
www.amazon.ca/gp/product/B07M8PJP7X/ref=ox_sc_act_title_1?smid=AJOOAX79OUIW7&psc=1
Very nice video my friend