Stunning video you did there (as usual!). Thank you for opening the Cube! Your calculations, meticulous measurements and describing "what's inside" were top-notch, totally! I think we have to start working on 10W LaserCube to celebrate 1M subs with you! 😁
@@pjt You crush them into sharp pieces and pile them on the floor, then you step on them, The pain will make you curse out loud and you will get fined 2 credits for each curse word, then you take those fine slips, and there's your toilet paper.
Thanks for the shout out! Looks like the laser head might be manufactured by OPT. Very glad to see that there is a glass plate installed in front of your reds. Those are probably open can and I have seen those glass plates be a savior for open can reds. That is a bit of power in a nice little box. I don't recognize the galvos, any markings on them/the amp? Excellent video, and review! Oh, one interesting thing to try with your higher power laser. Hang a black piece of thin fabric up and can the laser on it with a pattern. You should clearly hear the laser firing on the fabric from 2 foot away!
Also, a slight correction to your understanding of the lenses. You're partially correct, however the fast axis correction is normally on the laser diode, I think they are on your reds. The 3 optics after the laser diode/FAC that you see kind of work like this. The first lens is there to allow correction by shifting the collimating point and angle of the laser beam on the horizontal axis. The last 2 lenses are the collimating lenses, one for horizontal and one for vertical. Since the focal point of the horizontal output has been shifted the collimating lenses per axis can be done with lenses in different spaces from the laser diode. This break of the 2 axis allows for various trade offs like having a thinner fast axis for the knife edge mirrors with I think slightly more divergence VS the slow having a wider beam at the start but lower divergence overall. With cylindrical lenses the real trick is to think of a single laser is behaving like 2 independent ones in the same space, or at least is does for me. It's actually astonishing how well these lenses collimate multimode lasers diodes. I might be a fan of good old spherical lenses, but they limitations in flexibility.
First time looking inside one of these units. Very cool. Way more complicated than I thought. I knew there was a lot of specialize parts but not the complicated arrangement.
I honestly love this channel. Been watching for a good few years now, and I love how easy to understand you make everything, as well as putting an emphasis on safety whenever you do something dangerous. You remind people that while this stuff is very interesting and exciting, keeping ourselves healthy is just as important as what we gain from exploring and experimenting. Thank you for what you do!
750k! Congrats and well earned! I'm always excited to get notifications about new videos on your channel. It's always some really fascinating content! This one's no exception. Those indeed are some beautiful optics.
@brainiac75 I just wanted to say thank you for all of the content you make. My field of study was electrical engineering about 100 years ago. I have never worked as an EE, so your content is the only exposure I have, so thank you very much. Keep up the great content!
@@brainiac75 I just looked back at the videos you did in the beginning and I think the first video I remember seeing was the raw magnetic force 12 years ago I had a different name on RUclips then but pretty sure I have been a subscriber since that video lol. I remember you getting the big magnets delivered and the tools you made to separate them and put them together lol. Looking forward to the future
Congrats on your milestone! Can't wait for you to get to a million. I absolutely love your content and enjoyed it for the la 2 years. You taught me a lot! Big hats up to you!
That was absoboodylutely amazing.Your photography of the diodes and light paths was so clear. I wonder how many of your subscribers will make use of the detailed instructions on how to dismantle that laser. I know that I will ever own one and wouldn't trust myself to even turn it on if I did. But thanks for letting me see the magic.
It's been awhile since I've been back to your channel. I've always wanted a laser cube when they first came out before C-19 started. I never got the chance. They seem like a legitimate company so I figured the specs were pretty accurate. Thanks for the unveiling!
Congrats on 750k. That thing is awesome and has a price tag to match! I have a cheap half watt laser projector I bought years ago that is still pretty cool. I really should get a decent DAC to drive it with and fire it up again.
Great video! Amazing optical design!!! Congratulations on reaching so many subs! Always loved your vids from the start. I would love to see some vids about HV or just electricity as a whole. Get yourself a large HV transformer, and pull some huge arcs :) You could also measure the spectrum of the light produced, and see how it varies with electrode material. You could also talk about power factor, resonant capacitors (and LC oscillation in general), among other things!
That was so beautiful inside.....such a work of art! And congratulations on the 750K subs. Am thankful that I found your page (and MyPlayhouse) on that old magnet destroyed fan video you guys sent to BigClive.
Congratulations man I really love all your videos and hope to see many more from you!!! Also I've got an idea could you try and place multiple pop markers next to each other to try and get that 15s warmup time
very interesting coincidence with numbers ive been watching since the laptop meets monster magnet videos and ever since ive been hooked to this channel 😅
@@metalpipe71 yeah thanks for the heads up! these stupid scammers are all over the place but i didnt think they'd even target brainiac75.. they must be really desperate for money with the amount of channels they target..
love the equipment expose in the case by the way, I have a number of dichromic lens/mirrors and a color combining cube that still amaze me no matter how often I get to toy around with them.
Looking forward to this video. I am so happy that you have reached 750 000 subscribers. You are a channel who many look up to. There are so many interesting things you have shown that is both fun and valuable to watch
Congrats on the 750k! And for the cube I have just one word.... WANTS! Not that I know for what I would need that much power and the thought also scares me - I want to keep my and others sight intact...
Congrats on the subscriber goal. But wow. if 7.6 is roughly 92% of full power... that makes that thing actually an ... 8.3 watt combined power, if my math isn't completely out of whack. That's... uh, that's a kicker.
Yeah, not sure how high it would go given 5-10 seconds more. Should be at least 8 watts. Probably the blue diode that's going crazy ;) Thanks for the early watch!
Yo congrats for the huge milestone on your channel! I have watched your stuff for years, forgot exactly. This laser box is a beauty of bright color and mirrors! ^^
I press like before even watching your videos. I know it'll be good, and haven't been wrong yet. 1 Million subs is just around the corner with this type of quality content.
Outstanding progress! your inquisitiveness and honesty in a world of so much turmoil and disinformation are so refreshing to my mind, like a true Oasis shining in a sea of mirages.
The aperture shield was wrongly designed though. A loose or forgotten to tighten screw should result in a closed aperture instead of open aperture. Other than that an amazing device!
I wish you would have shown us what the 'laser box' is capable of.... What does it do? What is it for? what is it capable of doing? (I know these are all the same question lol I just wanted to sound smart lmao) I've seen a couple of cool laser projectors similar to this, and it blew my mind... so I was REALLY hoping you were gonna show us some of those AWESOME displays... Can it project on to the side of a small sky scraper??? The video I saw was talking alot about using it during protests and putting a message REALLY BIG on the side of a huge building so everyone can see it. Then she talked about how portable it was, so the person could project it on to a building and then easily move it before the cops come and find them, and they can just put it in their backpack and no one would know who had it... Then they can move to another building and start all over again... I thought this was GENIUS!!!! (especially with current events!! This is a GREAT IDEA!! But a costly one lol) THANK YOU! - - Could you make a video showing off just what this amazing tech can do??? :)
Hey! I'm using 7.5W Ultra LaserCubes for making laser shows and laser mapping. I already made one video with quick laser mapping - you can check it on my channel.
@@brainiac75 They're no good if the glass from the goggles isn't actually in the path of the light, even if rated at higher energies. You're the expert, so I don't need to explain it to you, but at 7.5W+, just looking at the (stationary) spot on a white background can be harmful ("indirect or non-specular reflections of the beam" and "as a result of direct, diffuse or indirect beam viewing").
Stunning video you did there (as usual!). Thank you for opening the Cube! Your calculations, meticulous measurements and describing "what's inside" were top-notch, totally! I think we have to start working on 10W LaserCube to celebrate 1M subs with you! 😁
🔥
We're all anticipating the day when you're finally testing your phased plasma rifle in the 40W range.
Hehe, wish I had more time to work on that ;)
How do you use the 3 sea shells?
@@pjt You crush them into sharp pieces and pile them on the floor, then you step on them, The pain will make you curse out loud and you will get fined 2 credits for each curse word, then you take those fine slips, and there's your toilet paper.
@@aarongreenfield9038 The internet has peaked. Shut it down
@@pjt Gladly 📴
Congrats on the new milestone, keep up the intersting tests and informative videos :D
Thank, Tim :) Much more to come.
Thanks for the shout out! Looks like the laser head might be manufactured by OPT. Very glad to see that there is a glass plate installed in front of your reds. Those are probably open can and I have seen those glass plates be a savior for open can reds. That is a bit of power in a nice little box. I don't recognize the galvos, any markings on them/the amp?
Excellent video, and review!
Oh, one interesting thing to try with your higher power laser. Hang a black piece of thin fabric up and can the laser on it with a pattern. You should clearly hear the laser firing on the fabric from 2 foot away!
Also, a slight correction to your understanding of the lenses. You're partially correct, however the fast axis correction is normally on the laser diode, I think they are on your reds. The 3 optics after the laser diode/FAC that you see kind of work like this. The first lens is there to allow correction by shifting the collimating point and angle of the laser beam on the horizontal axis. The last 2 lenses are the collimating lenses, one for horizontal and one for vertical. Since the focal point of the horizontal output has been shifted the collimating lenses per axis can be done with lenses in different spaces from the laser diode. This break of the 2 axis allows for various trade offs like having a thinner fast axis for the knife edge mirrors with I think slightly more divergence VS the slow having a wider beam at the start but lower divergence overall. With cylindrical lenses the real trick is to think of a single laser is behaving like 2 independent ones in the same space, or at least is does for me. It's actually astonishing how well these lenses collimate multimode lasers diodes. I might be a fan of good old spherical lenses, but they limitations in flexibility.
First time looking inside one of these units. Very cool. Way more complicated than I thought. I knew there was a lot of specialize parts but not the complicated arrangement.
Congrats on hitting *750.000* Subscribers! You really deserve it! 🎉🎉🎉
And of course a great Video as always 👍
Thanks, JustPyro! Glad you like and still watch my videos. Much more to come!
I love your videos! And seeing LaserCube 7.5W Ultra (which is also a part of my laser equipment) was terrific! Keep it up!
Congrats on 750k!
I honestly love this channel. Been watching for a good few years now, and I love how easy to understand you make everything, as well as putting an emphasis on safety whenever you do something dangerous. You remind people that while this stuff is very interesting and exciting, keeping ourselves healthy is just as important as what we gain from exploring and experimenting.
Thank you for what you do!
My words, too
750k! Congrats and well earned! I'm always excited to get notifications about new videos on your channel. It's always some really fascinating content! This one's no exception. Those indeed are some beautiful optics.
Congrats on the 750k - You prove that awesome quality videos are well needed on youtube :)
Congratulations once again for achieving this milestone! Here's to another 750k, and even more developments in amateur science like this!
@brainiac75 I just wanted to say thank you for all of the content you make. My field of study was electrical engineering about 100 years ago. I have never worked as an EE, so your content is the only exposure I have, so thank you very much. Keep up the great content!
I've learned a lot from your videos especially about lasers and safety. Thank you!
Congratulations on 750,000 subs been a long time coming. You deserve it. Keep up the great work
Thank you very much! My first video was uploaded in 2009, so it sure has been a long journey already. But I'm not stopping yet :)
@@brainiac75 I just looked back at the videos you did in the beginning and I think the first video I remember seeing was the raw magnetic force 12 years ago I had a different name on RUclips then but pretty sure I have been a subscriber since that video lol. I remember you getting the big magnets delivered and the tools you made to separate them and put them together lol. Looking forward to the future
@@brainiac75 Oh I born on 2008 ;D
This is so amazing! This kind of information is hard to come by, and the video quality is awesome. Thanks for sharing this with us.
Great news and thanks for the Shoutout for Zenodilodon the guys is a LEGEND!
This channel is underrated. I enjoy all the videos. Informative, and I find this content somewhat soothing.
👍👍
Congrats on your milestone! Can't wait for you to get to a million. I absolutely love your content and enjoyed it for the la 2 years. You taught me a lot! Big hats up to you!
happy 75 ....good luck ....
That was absoboodylutely amazing.Your photography of the diodes and light paths was so clear. I wonder how many of your subscribers will make use of the detailed instructions on how to dismantle that laser. I know that I will ever own one and wouldn't trust myself to even turn it on if I did. But thanks for letting me see the magic.
Do not get scammed by the fake brainiac75
It's been awhile since I've been back to your channel. I've always wanted a laser cube when they first came out before C-19 started. I never got the chance. They seem like a legitimate company so I figured the specs were pretty accurate. Thanks for the unveiling!
Congratulations!!! You deserve it!
Awesome! It's really cool how they were able to get RGB laser light.
Congrats on 750k. That thing is awesome and has a price tag to match! I have a cheap half watt laser projector I bought years ago that is still pretty cool. I really should get a decent DAC to drive it with and fire it up again.
Great video! Amazing optical design!!! Congratulations on reaching so many subs! Always loved your vids from the start. I would love to see some vids about HV or just electricity as a whole. Get yourself a large HV transformer, and pull some huge arcs :)
You could also measure the spectrum of the light produced, and see how it varies with electrode material. You could also talk about power factor, resonant capacitors (and LC oscillation in general), among other things!
750K subs with real high quality content is a very impressive achievement. You've earned it!
I've been watching your videos since a very long time , kinda nostalgic , congratulations
Congratulations! Just need 250k more but for now, let’s celebrate 🎉🎉🎉
Outstanding
The precision of making the beam coliminator in the factory must be tricky !!
I already know you will reach at least 1M no problem, congratulations, keep up the good work!
Ohhh I've loved this laser for YEARS I wan one so badly to add to my DMX light show 😍
Wow 750K subs! ¾ of the way to a million! Congrats Brian!
That was so beautiful inside.....such a work of art!
And congratulations on the 750K subs. Am thankful that I found your page (and MyPlayhouse) on that old magnet destroyed fan video you guys sent to BigClive.
Congratulations man I really love all your videos and hope to see many more from you!!!
Also I've got an idea could you try and place multiple pop markers next to each other to try and get that 15s warmup time
Thank you very much, Stripey! Sounds like a great idea. Will need to try if that works, though they will have to be very close :)
Congratulations on archiving such an amazing number!!!
very interesting coincidence with numbers
ive been watching since the laptop meets monster magnet videos and ever since ive been hooked to this channel 😅
Do not get scammed by the fake brainiac75
@@metalpipe71 yeah thanks for the heads up! these stupid scammers are all over the place but i didnt think they'd even target brainiac75..
they must be really desperate for money with the amount of channels they target..
Fascinating video, mate. Congratulations on the 750k subs.
Kæmpe tillykke med de 750k subscribers! :D
Tusind tak! Det er uvirkeligt for en jyde som mig :o)
@@brainiac75 ja det tror jeg gerne på! :D selv en glad vestjyde 🥳
love the equipment expose in the case by the way, I have a number of dichromic lens/mirrors and a color combining cube that still amaze me no matter how often I get to toy around with them.
It's very pretty on the inside, congrats for the 750k
Looking forward to this video. I am so happy that you have reached 750 000 subscribers. You are a channel who many look up to. There are so many interesting things you have shown that is both fun and valuable to watch
Thank you so much, Alexander. Much more to come!
I am fascinated by the rust removal lasers used in restoration videos.
Wow… Great content 👍 Very high qualities video(s) Thank you so much for beaming on 😃
Always fun to watch this.
Thanks for the early watch! I will never be tired of watching laser shows inner workings...
Congrats! The mirror set is beautiful indeed ^_^
Congrats on giving 3/4 of a million people a reason to subscribe to you. May the remaining 1/4 find their way to your channel to fill the million.
I see watt you did there.
Congrats on the 750k!
And for the cube I have just one word.... WANTS!
Not that I know for what I would need that much power and the thought also scares me - I want to keep my and others sight intact...
Congrats on the subscriber goal. But wow. if 7.6 is roughly 92% of full power... that makes that thing actually an ... 8.3 watt combined power, if my math isn't completely out of whack. That's... uh, that's a kicker.
Yeah, not sure how high it would go given 5-10 seconds more. Should be at least 8 watts. Probably the blue diode that's going crazy ;) Thanks for the early watch!
Styropyro: Hmm.. Interesting.
Congrats man, well deserved
Yo congrats for the huge milestone on your channel! I have watched your stuff for years, forgot exactly. This laser box is a beauty of bright color and mirrors! ^^
I press like before even watching your videos.
I know it'll be good, and haven't been wrong yet.
1 Million subs is just around the corner with this type of quality content.
Congratulations! You deserve it!
🤘❤️🤘
Outstanding progress! your inquisitiveness and honesty in a world of so much turmoil and disinformation are so refreshing to my mind, like a true Oasis shining in a sea of mirages.
Looks amazing! And congrats
Congrats it's aproximated that you will reach 1M subscriber milestone in ~3 years (2yrs 9-10 months) You are my favourite youtuber I love your videos.
well done on the subs man
AWESOME video congrats on 750,000. somebody needs to send one of these cubes to @Styropyro
Always good to see your videos.
Congrats! I think I'm watching you since 2017 at least.
Congrats and thanks for your videos!
Do not get scammed by the fake brainiac75
@@metalpipe71 don't worry, I know it 👍
ayeeee zeno! hes taught me a ton too :3 and congrats on the 750k! yeeee haw
Cool new laser. Thanks for the info about it...
Can't wait to get my hands on mine. The 2.5 watt units are already bright. It be interesting to see the difference. No such thing as too many lasers
Great video as always.
Truly amazing video.
Tillykke med 750k!
Congrats🎉
Thanks for another great video, Brian! Jeg er sikker på at du nok skal nå 1 mio. subs snart
Thank you, men der er stadig meget langt til en million...
well deserved sir. you have a great insight and imagination to experiment with respect to the laws of nature. thanks for the great content sir.
Thanks, Michael. Much more to come!
Stunning!!
Nice man u really deserve it :)
I love you videos mate!!
Congrats
I love Lasers but sadly they are so expensive and i also love your videos!
Great video 👍
3/4 of a MILLION?!
Congratulations!
Who else wants to get him to a mil?
Unreal, right? Thank you very much - much more to come!
^^
Til lykke med 750K tak for skide gode videoer :-)
Man this is a cool gizmo ❤️❤️❤️❤️
Thats a well build box
This is amazing
Fully adorable 6 beam cube 💢💢💢🥳🥳🥳
Always a dangerous experiment to enjoy on here!
Satme i orden! Danmark FTW! 😀
Congrats bro! I'm getting 31 laser diodes to celebrate for you!
Do not get scammed by the fake brainiac75
@@metalpipe71 Thanks for informing me, i've already explained this twice before.
The aperture shield was wrongly designed though.
A loose or forgotten to tighten screw should result in a closed aperture instead of open aperture.
Other than that an amazing device!
Super video
I would love to see you build a laser lumia optical deck attachment for that guy, like the Laser Wobbulator but better.
That montage music sounded a lot like Zaboomafoo
Never heard of them :/ Music credits in the description. Thanks for the early watch!
No worries - I know you didn’t steal it
Excellent video. I'm intrigued though to know what the other 2 most expensive items in your arsenal are. Care to share please?
Do not get scammed by the fake brainiac75
I feel like you had 50k subscribers just yesterday
Well, time passes by fast. My first video was uploaded in 2009... Thanks for the early watch!
Nice shout out to Zenodilodon, the greatest laser show hardware guy.
Do not get scammed by the fake brainiac75
Damn this laser must have the same diode that is used in the handheld sanwu striker 7.5W model that is only 450$ USD. Its one hell of a beast.
I wish you would have shown us what the 'laser box' is capable of.... What does it do? What is it for? what is it capable of doing? (I know these are all the same question lol I just wanted to sound smart lmao) I've seen a couple of cool laser projectors similar to this, and it blew my mind... so I was REALLY hoping you were gonna show us some of those AWESOME displays... Can it project on to the side of a small sky scraper??? The video I saw was talking alot about using it during protests and putting a message REALLY BIG on the side of a huge building so everyone can see it. Then she talked about how portable it was, so the person could project it on to a building and then easily move it before the cops come and find them, and they can just put it in their backpack and no one would know who had it... Then they can move to another building and start all over again... I thought this was GENIUS!!!! (especially with current events!! This is a GREAT IDEA!! But a costly one lol)
THANK YOU!
- - Could you make a video showing off just what this amazing tech can do??? :)
Hey! I'm using 7.5W Ultra LaserCubes for making laser shows and laser mapping. I already made one video with quick laser mapping - you can check it on my channel.
I think at this power level, safety goggles should look like ski goggles so light can't enter from the sides.
That would add some safety, though they are rated for much, much stronger lasers. Thanks for the early watch!
@@brainiac75 They're no good if the glass from the goggles isn't actually in the path of the light, even if rated at higher energies. You're the expert, so I don't need to explain it to you, but at 7.5W+, just looking at the (stationary) spot on a white background can be harmful ("indirect or non-specular reflections of the beam" and "as a result of direct, diffuse or indirect beam viewing").
Finally, the rgb laser
wow
I was really hoping for some smoke inside to make beams visible. Like from vape(lol) smoke machine or somethign