Cheap Ebay Wheel Spacer 8th Gen Civic fitment Test ....Watch out!
HTML-код
- Опубликовано: 21 авг 2024
- Get a FREE stock: join.robinhood....
Get 2 FREE Stocks : act.webull.com...
15 mm Wheel Spacers: rover.ebay.com...
MY wheel Spacer Video: Must Watch : • WHEEL SPACER'S 101 | W...
My Camera:rover.ebay.com...
My Phone: rover.ebay.com...
PoweDeWise Lav Mic:rover.ebay.com...
Techno Lab Mic: rover.ebay.com...
Vivitar Shotgun Mic: rover.ebay.com...
Welding Auto Dim Helmet : rover.ebay.com...
I had 1/2" Spaces on my 9th Gen Civic Si, they looked good but the dirt & mud sloped on the car was too much here with Ohio weather. Just rolling out of a car wash threw dirty groundwater on the side of the car so off they came, much better now, live & learn.
That’s another good reason to stay with semi flush fitment. 💪
Wow it looks good, I was debating on doing this to my 8th gen atleast for the summer.
imo if you’re low enough in the rear you should be fine to run spacers in the rear, if you’re tuckin to about the lip of the well or more it doesn’t look bad with that small of a tire
Eventually when I get my c10 redone(long road ahead) I plan to run a set of wheel adapter/spacers on it so I can run a set of 2010 camaro rims. It currently has really wide 15" chrome steel wheels with baby moons. They look good, but I know the 20" camaro rims would look amazing. Hopefully staggered 8" wide fronts 9"wide rears
Yah that would be a nice mix. Are the bolt patterns the same or do you have to get a wheel spacer that changes the bolt pattern?
@@BulliKid they are different. The camaro bolt pattern is smaller by 7 mm ive only seen one other c10 of my body style with those rims and it was a complete custom job where they changed the hubs out.
sinformant yea that’s a lot of work for a hub swap. In that case wheel spacers are only option!
15mm looks good but I think 20mm would have been real nice 👌
20 is a little excessive in my opinion but teach their own
15mm front
10mm rear
Perfect!
Cracks are from buying cheap off E-Bay😅
15mm, you keep saying 17mm, which nobody makes.
10, 15, 20,25 etc
Torque them proper.
64.1 are already hubcenctric for a Civic
Should’ve went with a 20 mm
20mm front
15mm rear😊
You can see the spacer is cracked already on the top if you watch close
Yea it cracked while back. This was not used it was just installed for demonstration purposes.
Great video
Aye bro quick question ?
After to install the spacers should I do the alignment?or doesn’t matter? I will put new tires and I just want to add the spacers but I want to do de best as I can to give my tires the best care
Great video thanks
You should do alignment within a few weeks. Make sure you like the spacers. First. Then if you decide to run them so the alignment.
Thanks bro
No problem always here to help!
So spacers bad idea (semi long term) gotta blacked out honda civ lx & been thinkin abt gettin spacers w fenders
So I just got a 13yr accord wheels on 17” just like these. On regular spring but my front tire is rubbing on the strut isolator what can I do? Yours aren’t rubbing even before you put new shocks. Can you help.
Your wheels probably have high Offsett. You need a wheel spacers.
I have OEM 03 Honda Accord 16 6 spoke wheels whats the best tire size an tread for whats the best tread for daily driver with Tein Coilovers on 2013 Honda Civic ? for a smooth ride and look.?
I would stick with 280-350 wear
Leggo
the reason you have an issue with those is because you didn't buy hubcentric. you should do your research before making videos, and not buy the cheapest ones out there either.
Yes these had hubcentric ring inserts, I just couldn’t find it for the video. I’m using it as a example. But yes you 100% need hubcentric.
@@BulliKid they sell them with huncentric rings made onto the spacer.
Yes I know. These were cheaper so they were inserts.
What's it drive like? You realize you'll wear the bearings out quicker
I was just showing the clearances I don’t have them anymore. They would drive ok. But I prefer not to use wheel spacers anymore on the car for safety and like you said bearing life
15 mm isn’t even close to thick enough to wear out bearings and stuff in any significant amount of time lol
@@BulliKid so are these 15 or 17mm?
@@AndyMartin92 17
@@BulliKid okay cause when I clicked your link it took me to 15mm and all the 17 mm say they don't fit the civic.
you could have installed 0-15 offset rims.
Yes but thats a different topic
20mm and roll those fenders BAM
Rear is rolled from prior stance set up. Rather not roll front since fender liner don’t line up and this is winter daily driver
1inch and a sleek fender roll haha
Prob 2 inch spacer
Always get hub centric. Should have never bought them without hub centric
They are hun centric I just didn’t have the separate piece. These were 2 piece. Again I would prefer 1 piece.
Did those 9th gen Si wheels require a hub ring for fitment on your 8th gen Si ?
These wheels had same hub bore size.
Now I noticed you have base model. These will still clear the brake calipers and suspension on a Si?? I haven't found any good sources on offset info yet
Yah it’s the same size wheel. 17x7 45 et. Si people run them all the time.
Thanks for the double confirmation bro!!
would I need spacers for swapping my 2004 accord wheels for a 2012 civic si wheels? They have the same bolt patterns : 2004 Honda Accord 5 lug 4.5 inch or 114.3mm High Positive Offset
They may fit but high positive offset will make the car look and handle worse.
@@BulliKid The car was built to take 18" wheels. There is tons of room in the wells. I called a few dealers and they told me that it will fit perfectly and handle much better without any spacers. Completely compatible since I have the 4 cyl big block. They said i could bolt on 225x60x18's no problem. I guess we'll see tomorrow. I'll send an update.
That is not going to fit and if it does it will look hideous. Lol
Hey quick question my friend do I need to stretch a 215 45 17 tire on a 17x8 rim for it to fit properly when installing?
No you can do 225 also. It depends on the offsett of the wheel also.
@@BulliKid ok let me tell you it's a 17x8 rim with a 35 offset I'm putting them on my 2010 honda civic lx
215/45/17 is best
@@BulliKid thanks Bulli Kid
I have a question how many inches should I drop my 08 FA1 civic w 17in 7.5 wheel setup which wheel should I buy that would cause any fender rolling?
Check out my wheel fitment guide playlist for the 8th gen civic. I talk about all the wheel set ups I have ran. What fits and WhTs to wide.
@@BulliKid okay thanks will do I'm subscribing as well clean honda bud
@@trevonlang8665 awesome , thanks man!!
Hey I have si wheels on my lx 2010 whats the best brand wheel and size spacer to used im ok with the back im just trying to get the front out a little more
H&R usually has great quality.
@@BulliKid thanks bro
Why wouldnt you tell people the size of those factory wheels including offset as well as the size of the factory wheels that came on the car? That is one of the most basic bits of information that people watching this video are asking.....
17x7 Et 45
225/45/17
@@BulliKid what was original wheel size and offset?
Thanks
Factory this came with hubcaps.
16x6.5 et 45
205/55/16
I think those specs are correct but it’s been a while since I sold those wheels.
Bro i got the same car how do you still have a clearcoat
Haha. Good question. It’s original paint. I take care of it well. I wash regularly and wax around 1 time a year.
Can I put 20 inch rims on 2011 Honda Civic ?
Possibly. Don’t ever do that tho
How to do u installed your front lips
I have a video on that!!
Question can a 07 finder fit on a 0 11 ?
Frank Gonzalez good question. Since the o9+ were updated front end I’m not 100% sure
What kind of rims are those?
Civic si wheels
You still running the camber bolts too bro ?
I am yes! It helps a ton for my set up.
I’ve been stancy and it sucks the fuel mileage back so much.
Yikes! Daily driver?
How much of a drop did you get with those springs?
It says 1.5 inch
How long did you used them are the safe ?
I didn’t used them for like a month when I originally got them and once cracked and I said no way Jose.
What are your Tyre and rim sizes?
Check out my wheel fitment guide playlist I talk about all the set ups I ran.
Well now...
You're rotors are on going the wrong direction
Why? Is said it didn’t matter what direction.
What about 25 mm spacers
Noooooo wayyyyy
@@BulliKid I just looked up pictures and yeah I came to that conclusion as well.. I’m running tsx stocks on a 2012 si so the wheel to fender gap is pretty big but I just love these wheels
Well the TSX wheels have a really high offset about 55 mm compared to SI wheels which are 45 mm so in your case 25 will be decent. If you know what I mean if you don’t I have a playlist on fitment. I ran second GENTSX was on my car they look nice because they look like civic type R wheels in Japan but yeah the offset is terrible in the car handled like crap
@@BulliKid i think I’m going with 20 mm it’s only a temprorAry thing until I find some aftermarket wheels that I actually like enough to spend money on
Are you buying the Bolton kit or the ones with extended studs