READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently. Update: FYI... 9 Months later, the door lock is still working fine...
My bit of advice: DO NOT remove the 4 screws holding the window regulator mechanism on the panel, if you do, you will have to rewind the wires on the spool and it must be done the right way to avoid having the control sequence reversed at the control button. The motor can be removed but do not remove the 2 screws holding the spool mounting plate in place.
Thanks very much for posting this video. I had a similar problem, but it turns out the lock mechanism was jammed due to lack of lubrication, and the motor could not move it. It did hum or make any noise at all. Once so freed up the mechanism and lubed it, everything worked. But, your video helped me get to the problem.
Quick note. You do not have to REMOVE WINDOW. JUST TAPE IT UP AFTER REMOVING bolts that he it in place. Also do now remove window Regulator. You will screw yourslf if you do
i had the same issue , the left motor onthe sliding door making the same sounds its 2016 grand caravan , with 40k miles . while the right sliding doesn’t lock 🔒 at all.. even tho it open manually and with remote. any idea what to do?
Unless you know how to take out a window yourself don’t start on this project because you’re going to take everything apart and once you get to remove the window you’re not gonna be able to do it he should have recorded that part because that part is the most important
READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently.
Did you get your door to work? I had to hold down the unlock button inside the door and press unlock and lock on the key fob. That was the only way I was able to open door.
READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently.
5 stars from me, as you confirmed the central lock motor is my issue with the noise, second... fair play for the video is not the best but made me realize not and what to do, as when i started doing this i would of made some ofbyour mistakes also... as for the techs, i only had to do this myself as in england when you walk in a garage with issue like this they laugh at you and refuse the work....
Way too many steps. You disconnected a lot of stuff out of order and didn't need to remove the window, or window regular. Nice try for a first timer. Also, you should always take pictures as you go so you can see what it should look like as you finish.
Shaun Tube Shaun not sure I believe this is electronic but I would remove the interior panel to access the release. I'm sorry about the reply but please reply with how you did it
The problem I had was the door was shut. The lock motor had failed so I could not undo the door. I pulled the panel half off (front of panel is attached with screws that can only be undone when door is open). I got heavy handed with lock connecting rod and it moved! That fixed it! Lucky me I now dont need to go any further at the moment. I have a UK 2013 Grand Voyager.
READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently.
Update: FYI... 9 Months later, the door lock is still working fine...
My bit of advice: DO NOT remove the 4 screws holding the window regulator mechanism on the panel, if you do, you will have to rewind the wires on the spool and it must be done the right way to avoid having the control sequence reversed at the control button. The motor can be removed but do not remove the 2 screws holding the spool mounting plate in place.
Could you please explain? I don't want to screw this up.
I think I will be taking my to the dealership, the video always gives you the impression its easier than what it really is.
ye maybe sometimes got to bite the bullet
Thanks very much for posting this video. I had a similar problem, but it turns out the lock mechanism was jammed due to lack of lubrication, and the motor could not move it. It did hum or make any noise at all. Once so freed up the mechanism and lubed it, everything worked. But, your video helped me get to the problem.
8 months later. How's it holding up?
Michael Pearson It still works but now the lock motor is buzzing, so I will finally have to replace it..lol
pb blaster baby
This was actually really helpful. Is there a video on the assembly?
Get a hex to 3/8, or better yet a 1/4" adapter to remove these screws and bolts with your impact driver.
Can this going bad make the fob not work?
Thank you for making this video. I am pretty sure this is what is happening with our van. I will let you know if it works.
Quick note. You do not have to REMOVE WINDOW. JUST TAPE IT UP AFTER REMOVING bolts that he it in place. Also do now remove window Regulator. You will screw yourslf if you do
did you ever record the assembly process of the Dodge caravan sliding door lock.?
good step - by - step instruction.
thanks
Very smart actually to disassemble PRIOR to ordering. Nothing worse than doing the job with a wrong part already in hand...
I'm speechless !
Little tip, do a run through before you start recording.
i had the same issue , the left motor onthe sliding door making the same sounds its 2016 grand caravan , with 40k miles . while the right sliding doesn’t lock 🔒 at all.. even tho it open manually and with remote. any idea what to do?
Gets to hardest part, skips it in the video, takes whole window out, says about impossible to put back cords "oh I'll get some help with that."
*Sigh*
Unless you know how to take out a window yourself don’t start on this project because you’re going to take everything apart and once you get to remove the window you’re not gonna be able to do it he should have recorded that part because that part is the most important
recorded well
@@CHASINGPROFITS where is h
The recording
I've never laughed so hard in my life. 😂 the problem with the door is it's old. If that's not good enough, blame the kids.🤦♂️ WTF. 😂
The shade tree is going to fall on this guy.
Trust me dude already hit me over the head this year you have no idea
11:09 What 4 bolts? Need clarification.
Also. Can we get a part number you ordered? I am looking to knock out this project this weekend.
No need to remove glass.
How do you get to the assembly without removing the glass. I'm working at in now
Duck tape the window up in the closed position
@@dylanlindsay4353 - you can also use wood shims jammed between window and body to hold the window up in place.
That happens to me right now and I can't open the door at all ... Any ideas!?!?
Same problem
READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently.
Would make a great drinking game
ok. now I want to sell my van
lets do it
How do you open the door if it's stuck? To begin the disassembly?
Did you get your door to work? I had to hold down the unlock button inside the door and press unlock and lock on the key fob. That was the only way I was able to open door.
READ THIS - IF YOUR SLIDING DOOR IS STUCK AND UNABLE TO OPEN. I was unable to open driver side sliding door for months (no buzzing noise from lock mechanism on this side). The manual lock actuator for this door was stuck and could not be forced. The tip about pressing the unlock button and forcing the manual door lock at the same time worked to release the actuator!! KEEP IN MIND... This did not work when using the unlock button on the remote... I had to use the unlock button on the driver door. Now the door lock on this side works fine (like it was never broken). Not sure how long this will last but at least I can open the door currently.
Please use power tools
5 stars from me, as you confirmed the central lock motor is my issue with the noise, second... fair play for the video is not the best but made me realize not and what to do, as when i started doing this i would of made some ofbyour mistakes also... as for the techs, i only had to do this myself as in england when you walk in a garage with issue like this they laugh at you and refuse the work....
Way too many steps. You disconnected a lot of stuff out of order and didn't need to remove the window, or window regular. Nice try for a first timer. Also, you should always take pictures as you go so you can see what it should look like as you finish.
They know the issues but no recalls thats messed up
Everything is made cheap on these vans i have had lots of problems with my 20015 most with in a 2 years !
Hey can you do window regulator install on same side same sliding door
Yes I can email me randerson0322@gmail.com
you dont need to unscrew most of them even regulator
Which cable(s) unlocks the door? Mine is locked shut and I cant get to the screws I need to.
Shaun Tube Shaun not sure I believe this is electronic but I would remove the interior panel to access the release. I'm sorry about the reply but please reply with how you did it
The problem I had was the door was shut. The lock motor had failed so I could not undo the door. I pulled the panel half off (front of panel is attached with screws that can only be undone when door is open). I got heavy handed with lock connecting rod and it moved! That fixed it! Lucky me I now dont need to go any further at the moment. I have a UK 2013 Grand Voyager.
I think you better find your tools first before doing a video!!
got em
Dude wth. Make a video but you had no idea what you were doing besides looking for a noise.
Taken money away from techs I am one thanks you tube
Jeff L If the prices for a tech to do the job were even remotely reasonable, people wouldn’t be trying to fix things themselves.
You don’t even get 25% of the labor, the dealer does so quit whining,or open your own shop