Honda Civic MacLifter Bumper Kit | Install Guide Eg Ek Dc2 Full Review and Quality
HTML-код
- Опубликовано: 13 сен 2024
- This video is a Install Guide to do it yourself at your typical garage or anywhere!! Follow the instructions and you can do it yourself!!
MacLifter Install Kit to get rid of the Typical Honda front/rear bumper Gaps and pet peeves!! This solves it!! And adjustible to put it how you want it to be!
Enjoy!
For more info on this Kit Check out Mac.Lifterkit
On Instagram!!
Or His Website!
www.maclifterk...
They make Bumper Gap Tucks Kits for the
-Civic Ek
-Civic Eg
-Del Sol/ Crx
-Honda Dc5
-Honda Jdm Dc2
-Prelude 5th Gen
Tools Required for this install!!
Tools Required
-8mm and 10mm socket
-Ratchet
-Wrench
-Drill machine
-7/64 Drill Bit
-FlatHead screwdriver
-Mini phillips Screwdriver
-Hole Pincher
-And Common Sense Thats it
Car Info
99 Honda Civic Si Em1 B16a2 Ebp
Followup video with Ajp foglights kit install url link and front bumper reinstall and fix for the adapters url link down below
• 6th Gen Honda Civic Si...
If you Enjoy This video Like, Subscribe and comment!! Thanks for Watching!
Over and out!
Landed on this video to get an idea of quality for this kit. I must say, I’ve never seen someone work on their car with such tight jeans and a Fanny pack around their chest while they work on their car lol p.s the dude on the Harley was probably looking at you for the same reason haha
Keep up it up 👍🏽
Gained a lil weight on my body gained a few extra pounds clothes is expensive nowadays so my jeans fit slightly more tight i dont wear skinny jeans like the super tight skinnies haha.. i used to be slim, now im average and brolic.. fanny pack is for all the bulky shit i carry around keys, phone, wallet, and the little misc, all these things cant fit into my pockets without making me look like a fatass and making me uncomfortable everytime i sit on top of a wallet, not to mention bad for your spine if you or your relatives sit on wallets can get paralysis, so i heard anyways… and also with my phone and keys showing out and all the little misc 🤣😂 thank you for the feedback and commentary and watching the video much appreciated! Haha
For anyone watching this install video, the brackets go UNDERNEATH the bumper tabs NOT on top. Just saved you a headache and an hr of time wasted til he mentions this.
I had already mentioned it!
You can tell this guy never used tools before this video lol 😂
what did you spot that i missed!? I’m actually a professional comedian also😪
FYI to anyone watching this video: you could press the tabs inside the trunk to remove those side guides instead of jamming a screw driver behind it and potentially messing up the sheet metal.
I'm not sure if there's a right or wrong way to install this bracket for the front bumper. But it does look like from other videos on the web. You have it installed on the top when it looks like it should be installed from the bottom.
I mentioned it in the video, lol only if you saw the whole thing, i will be installing foglights kit on the car and just gonna simply unscrew 2 screws and just fold it underneath it easy couple seconds.. when i get the chance. bumper has to come out anyways, but i still managed to keep it way better and flush and no gaps tho even installed on top of the bumper 😅
@uwkcal no worries, I did stop watching the video once I saw how you installed the brackets.
@@TheRealDannydos well good! I hope u left a like and subscribed to my channel! regardless if i did theres still no gaps and it is your responsibility to make sure the brackets gets installed correct, besides it comes with an instructions manual anyways, you didn’t even have to watch my video! Its basic common sense anyways, it just so happened that the bracket was put on top ;) but there was no need to even click the video link anyways! for watching my video!
@uwkcal if I were you, I wouldn't quit my day job. This YT stuff isn't for you. It's like, "Hey, I'm going to make a video today about something I've never done before, and share it with the world." Then you start crying because people are pointing out that you did it incorrectly.
@@TheRealDannydos well listen here pal, nobody put a gun to your head to watch the video, leave your comment, review, feedback and keep it moving plain n simple.. unfortunately youtube blocked the dislikes so nobody can see any dislikes on any videos, lame but maybe the world would be a better place if they so returned the dislikes button option! instead of keeping that info to themselves and using that knowledge for youtubes own self, right? Unless they be for the Good then is it totally fine? See ya wouldn’t wanna be ya 😅
Looks amazing
Thanks made a difference i have to readjust the front bumper i put the kit on top of he bumper instead of underneath it but still came out looking good nonetheless 🤣.. as soon as i get my ajp foglights kit i’m gonna do an install video on that aswell!
Dope
how much is this kit ?
2000 pesos
poor boyz. made in Philippines bumper kit
So long dude.... Should have go straight to the point.
This is why youtube invented fast forward and previous to get to your points some like hearing everything and seeing everything someone does, it was not intentional intended, just awesome because you have the option to fast forward i too not a big fan of long videos but if you been in the youtube game for a long time you would know this by now! But nonetheless thank you for watching my video and leaving a comment you are the best! :-)
Delete the dc2 from your video because it’s not the same
The Concept is the same, thats the whole point of the video.. its the idea that counts and I readjusted and fixed it on my other videos and info description box… as far as installation guide and 100% review