How to TEST and FLUSH brake fluid on TOYOTA Camry 2015-2017 / ALIMECH
HTML-код
- Опубликовано: 6 окт 2024
- ITS ALIMECH: In this video i will show you how to test and flush brake fluid on toyota camry it will be same for models from 2015-2017
Brake Bleeder Kit : s.click.aliexp...
Brake Fluid Tester: s.click.aliexp...
TOYOTA Camry Brake Fluid Complete Flush
Brake fluid must be changed every two or three years, because brake fluid is (Hygroscopic), means, it likes to absorb water and air moisture
and ones you have moist in brake system, the brake will be poor
its important to use same brake fluid type, im using (DOT 3) for this TOYOTA Camry 2017
Rusty TOYOTA Camry Brake Caliper Restoration, Brake Caliper Painting: • Rusty TOYOTA Camry Bra...
Brake Rotor Drilling: • Brake Rotor Drilling
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: ali.hoshyar89@gmail.com
Facebook account : www.facebook.c...
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh
Good job my brother. Be blessed.
Thanks bro for watching
Dude your videos are very specific and attention to detail haven't seen a RUclips video quite like yours awesome
Thanks man, I believe my new videos even better and shorter
What size wrench did you use for the bleeder? Thanks again! Great video!
8mm, thanks
Awesome video. I have to change my rotors and rear brakes. Do I need to do the flush first or change the other stuff out first. Also will this work on 2017 Toyota Corolla?
Thanks, change the rotor and pads.. and then flush the brake fluid
AliMECH thanks 🙏
I can’t figure out how to remove the plastic filter without breaking it. Wish you would have showed us in the video 😢
I show in this video
ruclips.net/video/3bWrQkYpdNE/видео.html
@@AliMECH Thank you!
Great explanation and video thank you
Glad it was helpful!
... EXCELLENT ... GREAT DEMONSTRATION ...
Thanks for watching 🙏🙏
When you’re pressing the break pedal is on Neutral or Park gear? Thanks!
Parking, actually it doesn't matter, but P is better, you are welcome
Do i need scan tools for my camry 2.5 2012 model asv50 ？ Or i can do it exactly like how u do....？
How many times should the second person press and hold the breaks ?
Till you see new brake fluid comes out,
How many miles you have to change the brake fluid?
My next project
Awesome
Great demonstration
Thanks for watching
Muhimaaaaaaaaaaaaaaa, thank you for the tutorial Ali
Thanks for watching and the support
Do the car have to be on when pressing the brakes?
Yes, it's better to start the engine when you do the brake bleeding on modern cars
When bleeding the brakes do you push the brake pedal in while the bleeder screw is loose or tight?
When its tight, push the pedal and hold, then loose the screw and bleed, the tight the screw then release the pedal
@@AliMECH thank you
can you add the brake fluid with the screen on or do you have to the screen off to add the brake fluid?
am i able to jack up each side of the car as I do this? or does the car need to be level on jacks to do this?
Sure you can, here in this video I didnt remove the wheels
ruclips.net/video/GjLj65KyspE/видео.htmlsi=yr-1dQ7DNYG8YSjn
@@AliMECH Awesome. Thanks for the vid bro 🙏🏻
Good job. What is the music at 04:00
Music: Scouting from youtube create library
do you have link to buy that brake caliber ?
Get the caliper cover: amzn.to/31hyGCw
Its my custom caliper cover, ruclips.net/video/sfEhf9UOUv8/видео.html
Should the cap be on the brake fluid reservoir while doing this?
No, always put the cap back on so the brake fluid wont contact with air, bc it likes to absorb air moisture
@@AliMECH thank you.
Nice!!
Should the car be on or off when pressing the brake?
off
@@AliMECH thank you
I have a 2015 Toyota Camry hybrid LE. How many bottles should I use to flush the brake fluid? Is there a difference between a regular Camry and the hybrid regarding this? I've got 100,000 miles on the car and I've never flushed the brakes before. Thanks!
For me I needed 2 bottles, but I really dont know if Hybrid needs same, if the have same reservoir and caliper size, yes the need same amount
@@AliMECH thank you 👍👍
You welcome 🙏🏻
So, 1 bottle was enough?
No, 2
see i have the same camry and on the top of the oil resevoir the cap says DOT 4
Subscribed your awesome and save me money!
Thanks, glad my video helped you 🙏🏻
Where did u get plastic hose for bleeding
Hardware store, it's a 6mm inner diameter hose
You’re bleeding brake every wheel?
Sure you have to
What kind of vacuum pump did you use?
It wasn't a vacuum pump, just open the valve and brake, but next weeks video I will show a good pump for flushing brake without removing any wheels, stay turned
@@AliMECH I mean when you removed the brake fluid from the reservoir.
12V oil Extractor pump: s.click.aliexpress.com/e/_DCUkdIR
What size hose is needed?
6mm
It seemed easy but why continue to open and close the valve? That confused me
It make sure that no air goes back to the system when I release the brake after bleeding, that's why I brake and then bleed, and close the valve and brake again to bleed again
@@AliMECH thank you brother!
Does this work for the 2020 models ?
Yes, it should be the same