危険な欅の製材・Danger zelkova sawing!!
HTML-код
- Опубликовано: 16 сен 2024
- #zelkova #欅
欅の製材中バックしている時に引っ掛け鋸が外れました。事故にならずによかったです。笹田木材/天板太郎では6月24日(金)〜6月26日(日)まで3日間限定で一枚板とギャッペ・絨毯の展示会をいたします。
よろしくお願いいたします。
RUclips / @ysasada18
笹田木材 www.sasada-wood...
天板太郎 tenbantaro.com/
東西新風堂 www.shinpudo.com/
Sasada wood , Tenbantaro
Address Higasiokinosu1-10 Tokushima city Japan
Phone +81 886 664 5858
E-mail info@sasada-wood.co.jp
It would be very interesting to see a blade change from start to finish. Thank you for sharing. Have a blessed day.
昔は、この様な大木を手作業で製材していたのですから、凄いですょねー。
内の父は鋸屑鉋屑を買いに製材所にオート三輪で行ってました。私が6才頃でオート三輪の助手席に乗って父に付いて行ってました。その頃はこんな大きな木をしょっちゅう切ってたの覚えています。多分今は進歩して半無人化な感じと思いますが、もっと人が押したりして丸鋸やこんな縦鋸使ってた事覚えてます。57年前の話です。懐かしいです。
Lovely superb Nice sawing such a huge timber. It's having a very nice grain .
特に刃がついて右側には立ち入らない方が、懸命だと思いますが
ただの操作ミスでは?
傍にいて巻き込まれていたら即死、でしたね。怖かったです。何はともあれ、ご無事でよかったでね。
Almost at 50K! Keep up the great work Sir. Thanks for another great vid Mr.Sasada STAY SAFE ALL
A very perfect work and video Thank you very much
Sir, First two cuts ok, third cut hit a spike, blade still cutting clean, at cut six, the blade is struggling, then it breaks. Let's see this again, later, different blade cuts better. Enjoyed watching this log being cut.
Was that a tensioning or tracking issue? In any case, a moving blade is a no-go area, you have tools for off-cut recovery, as proved later!
バック引っ掻けてますやん。
それほど重たい原木なんですねー
ご安全に!!
割れもなくいい杢ですね。
ハッカも打たないで、大体台車が出ているよ!危ない。帯鋸だけで良かった~!
I like watching you cutting logs and when I get a scam caller I have put sound up on max with my cellphone next to my tablet speakers 🔊. LOL LOL LOL LOL 😆 😂 😅 🤣!
If you watch the video in slow mode you will notice that the saw cut left a bump in the wood and when the wood was moved back to the starting point the bump caught the saw blade from the back side and broke it now the question is why the bump maybe dull saw or the wood moved 🤔.
17:25 さっきノコが外れたのに、引き中に身体入れたら大事故おこすと思うのですが?現場猫案件ですがな。ちゃんと ノコが外れた原因を特定して改善したのですか?
工員は時間に負われるので、瞬間的にとっさに無理してしまいます。こういう巻き込まれたら大事故を起こすような機械作業は 立ち入り禁止範囲に侵入する場合は 必ず停止していないと行けないと思いますよ。エリアセンサーもないのですか?
ちょっと慣れすぎて怖さを忘れてるんじゃないですかね?
I AM SO GLAD THAT NOONE GOT HURT!
THANK GOD!
Arigato
Yes, it is good no employee was injured.
Wow I hope no one got hurt.
When the blade comes off the wheel it has no power and its contained within.Beautiful wood the best grain is usually toward the center of the log.
That was a near accident. From what I can gather, it resulted in no new safety measures implemented.
I thoroughly enjoy this channel and my deep wishes are that everybody remain safe.
I hope the extreme luck of the breakage when nobody was near, motivates better safe practices.
Meanwhile I shall skip this content.
落ち着いて対応されていますね、
しかるべき確認の後~直ぐに再始動!。
さすがプロですね!!。
And that's why you shouldn't be anywhere near the saw at all times. Is removing these small pieces of wood that important?
Yes. When the carriage comes back they can jam things up. Or be pushed back and push the saws off them self etc.
Cheers Keith (new zealand)
Und dann lieber sein Leben riskieren? Unverantwortlich.
*- Nice Table Top Slabs, but dangerous time.*
*- 素敵なテーブルトップスラブですが、危険な時間です。*
glad nobody was hurt.
Супер красивая древесина.
綺麗です。女性の様に滑らかな肌♥️
That could have been very nasty.
切り面に数字が見えるのは何故ですか?白い数字が見えます。
ヒェェ~、恐ェェ~。どうか、ご安全に。学生の頃、中央卸売市場でバイトしてましたが、マグロの解体場にこんな感じのノコギリがありました。そこで働いている人たち、指が10本揃っている人、1人もいなかった(( ;゚Д゚))ブルブル ほんと、どうか、ご安全に。
Is it known why the blade came off? I don’t see a reason in any of the comments!
Weil er mit den Stamm das Blatt zu sehr gedrückt hat. Wenn das Material unter Spannung steht und dann noch zu viel Druck ausgeübt wird kann es reißen bzw vom Rat springen was hier passiert ist. Diese Firma hat absolut null Sicherheitssysteme um das zu vermeiden. Da fragt man sich echt warum Asiaten länger leben wie Europäer bei solch einen fahrlässiger Pfusch.
めっちゃビビりました…(´д`|||)
タイヤの前後しっかり調整出来てないのかな?送材車は5分出し?
Nguy hiểm quá
Yikes!
Bei euren Sicherheitsstandarts kriegt man ja Angst. Keine 10cm vom Bandsägen Blatt sich hinknien. Verliert man das Gleichgewicht können deine Kollegen erst mal viel putzen.
快速退車 上至下須注意 速度須放慢 不合格的師父
Hai anna iam Nagendar Anna na age 42 Camsexx.Uno qualification m.l.t medical lab technicianz ,Srpt lo jobs unte cheppagalaru anna.with govt Jobs
1st Comment :)
Yes
Arigato
✋ 𝐩𝐫𝐨𝐦𝐨𝐬𝐦