2004 Honda Pilot Engine Mount
HTML-код
- Опубликовано: 9 сен 2024
- A quick video to show how to replace the front passenger side engine mount in a Honda Pilot. This is similar to other Honda V6 engines.
There are 5 engine mounts on this 3.5L Honda V6: passenger, front, two small transmission mounts on the left side and a rear mount. This video speaks to the front passenger side mount.
Created with Movavi Video Editor
www.movavi.com...
I changed mine last week, it's called the side engine mount. Ps, I didn't need to remove the bracket . I wiggled it out. Someone asked if the engine needs to be jacked up, I didn't have to. But just to be safe you can always have a jack ready under the engine. Good luck folks. I hope this helps
Agree, the engine doesn’t have to be supported, but I did anyway. Jack up to the oil pan with a wood cushion before removing the mount.
Thank u broski😎👍🏼
Did you need to jack up the engine before replacing the mount?
I did place a floor jack under the oil pan (with a piece of wood), but I only raised the jack until it touched. I did not lift it any.
How did you know that you needed this one?
It had the most movement when shifting between reverse and drive. I ended up replacing all the engine mounts a few months after this one. The side and the front do most of the work.
I am very late but where can I order honda parts I cannot order the mount that is in between the wheels unless I order it off eBay and I want the original part.
I order parts online from my local Honda dealerships, then pick them up. For some reason, this is cheaper than going to or calling the parts dept and ordering it
$80 a piece or set?
$80 (with shipping) for the Engine Side Mounting. It is the whole assembly. Honda part number 50820-s3v-a82
How much did those honda mounts cost you?
$80 with shipping