The subframe collars and 2-ways will help with the hop, but this is exactly why I was only running my low boost LC and not on Kill map 2 weekends ago. No matter how much heat you get in the tires, the cold glue just isn't as effective. Whenever I go full send in those conditions, I always end up spinning and breaking stuff too(even with AWD) Sorry for your pains, but you'll have it back up and rolling again soon.
Collars are not enough. You do that for silly wannabe street cars. The squishy stock rubber needs to be eliminated ENTIRELY, not band-aided. The knuckles need to be isolated from any movement. Get a LOT stiffer rear springs and then grab a shock that lets you dial in a lot of rebound adjustment.
Daang bro this bring back lots of memories. Ran a 12.7 at 127 in my trans am , so I said 1 more with better drags I borrowed from a guy. Blew the rear like a bomb . Your car is fast af btw. That pull from 40 to 130 was crazy.
@@mkvB58KING All those 7 second Supras are mostly shops with a lot of money. I’m just an average guy modding my car in my garage. If I had the funds I’d already be doing 8’s. Plus, my 60-130 is evidence it has a 9 sec pass in it with my stock engine and trans. I just need to leave good.
@ no one has done it yet. Some Q’s have built engines running mid 9’s. I would speculate to say that we will be doing high 8’s in the Z’s. I don’t think these engines will ever dip into the 7’s. Either way right now we’re limited by turbo sizing. We can only fit some small frames in stock location. To fit anything bigger we need some custom front/top mounted turbos. VR30’s haven’t been pushed past 1000whp yet anyway and I’m not too sure it will ever go past that.
Salty tongue. Lmao my father is from Cuba and he has some crazy sayings as well. lol bradenton is just across the bay from me. Building my Q60 as well, getting it tuned in a few weeks.
@ AMS heat exchanger, AMS auxiliary water pump, AMS expansion tank, Z1 silicone hose set. Eventually, I wanna upgrade to the Z1 turbos as well. Not really interested in running ethanol. I wanna keep it on 93 octane. It’s my daily driver.
@@spookholidae4948 thanks and hmmm… depends which AMG. MB is on another level. I like them but gets expensive to mod. I have a buddy that works for Renntech and he gave me a tour of the place. We too much money for my blood lol
It’s all good bro! You’ll be back stronger than ever. The Zilla is a beast 🐲🇯🇵and all your content is dope! More boost more problems is how it goes! Do you have a differential brace installed?
@ Nice! I have one installed on my 08 G35S 6MT. The rear end feels way more grounded shifting at higher RPM. It’s a low key mod but you feel a big difference on the Zilla.
You seen what I did for the chassis stiffening. If you do what I did this is less likely to happen?. doesn’t mean it still can’t. That’s why I named it project tighten up. I wonder if driveshaft shop makes axles for our cars.??
I did see. I purchased quite a few things this time around and going to install proper 2 way Coilovers. No one makes axles for our cars yet. The axles are quite beefy tbh compared to the others found in the FM platform and these are not the same as 370’s so we can’t just buy upgraded 370z ones. This time around it should be fine with the stuff I’m doing now. I don’t think it will break again unless I do something stupid lol
@ wheel hop! Has gotten me more then once in my dodge neon drag car and my srt4 neon. So I learned the hard way as well. And I reached out to drive shaft shop and they made some for me. Thu I don’t plan on going so extreme with the Z I learn the importance of tightening the chassis we needed to limit the chances of it happening! You got this bro. Can’t wait to see you 9’s my eyes are on you bro!! 🔥🔥🔥♥️
@@007gir yea they helped screw up the sales volume for sure. People will come around to it soon. All models are basically at 10k off already. I think the interest rates are just too high for most to want to buy in.
Damn i missed out being there that night, i was hoping to hit 10s with this nice ass weather🥲 but dang that launch is spicy!! Fix her back up so you can break a record next time🔥
Down bad boys 😔
The subframe collars and 2-ways will help with the hop, but this is exactly why I was only running my low boost LC and not on Kill map 2 weekends ago. No matter how much heat you get in the tires, the cold glue just isn't as effective. Whenever I go full send in those conditions, I always end up spinning and breaking stuff too(even with AWD) Sorry for your pains, but you'll have it back up and rolling again soon.
Yea I didn’t make enough changes to accommodate for the conditions. I take all this as a learning experience.
Collars are not enough. You do that for silly wannabe street cars. The squishy stock rubber needs to be eliminated ENTIRELY, not band-aided.
The knuckles need to be isolated from any movement.
Get a LOT stiffer rear springs and then grab a shock that lets you dial in a lot of rebound adjustment.
Props to you for pushing the car like you’re doing on the drag strip!
@@takeoff_szn it’s what I love to do!
Daang bro this bring back lots of memories. Ran a 12.7 at 127 in my trans am , so I said 1 more with better drags I borrowed from a guy. Blew the rear like a bomb . Your car is fast af btw. That pull from 40 to 130 was crazy.
@@Emilthehun Things like that happen. Thanks man it moves pretty nicely.
Damn, bro, so sorry to hear that. You did a hell of a number on that rear diff. Time for some upgraded reinforcements.
Already in possession 👌🏽
But that windshield was spotless. :)
Lmao gotta be able to see 💀
Can't wait for the comeback man 🙏 It is very unfortunate but you are showing first hand the do's and don't on modifying a car.
Keep your head up brother. More reason to build up and come stronger. Car still goes hard💪
No doubt🤜🏽🤛🏽
Yea time to upgrade that backend!!!. You’ll be back!!!!
Love the caption lol
Sorry to hear what happened. Just too much torque i guess. Atleast the engine is all together lol
It's incredible to see how different the Supra and Z are after a few years of tuning. Supra is deep into the 7s and the Z's are struggling in the 9s.
@@mkvB58KING All those 7 second Supras are mostly shops with a lot of money. I’m just an average guy modding my car in my garage. If I had the funds I’d already be doing 8’s.
Plus, my 60-130 is evidence it has a 9 sec pass in it with my stock engine and trans. I just need to leave good.
@ I'm just speaking in general, no shade to you. What's the WR 1/4 for the Z currently?
@@mkvB58KING 9.7 w/ stock engine/ trans & hybrid turbos I believe.
@@ZillaFullBoost Not too far off from the Supra. What about built engine/trans?
@ no one has done it yet. Some Q’s have built engines running mid 9’s. I would speculate to say that we will be doing high 8’s in the Z’s. I don’t think these engines will ever dip into the 7’s.
Either way right now we’re limited by turbo sizing. We can only fit some small frames in stock location. To fit anything bigger we need some custom front/top mounted turbos.
VR30’s haven’t been pushed past 1000whp yet anyway and I’m not too sure it will ever go past that.
Salty tongue. Lmao my father is from Cuba and he has some crazy sayings as well. lol bradenton is just across the bay from me. Building my Q60 as well, getting it tuned in a few weeks.
A lot of things don’t really translate well in English lol. What are you getting done on the Q?
@ AMS heat exchanger, AMS auxiliary water pump, AMS expansion tank, Z1 silicone hose set. Eventually, I wanna upgrade to the Z1 turbos as well. Not really interested in running ethanol. I wanna keep it on 93 octane. It’s my daily driver.
Still a beautiful car....thinking about going from AMG to that Z....sheeiiiit!
@@spookholidae4948 thanks and hmmm… depends which AMG. MB is on another level. I like them but gets expensive to mod. I have a buddy that works for Renntech and he gave me a tour of the place. We too much money for my blood lol
It’s all good bro! You’ll be back stronger than ever. The Zilla is a beast 🐲🇯🇵and all your content is dope! More boost more problems is how it goes! Do you have a differential brace installed?
Sure will be back stronger. I bought a diff brace for the next round of mods.
@ Nice! I have one installed on my 08 G35S 6MT. The rear end feels way more grounded shifting at higher RPM. It’s a low key mod but you feel a big difference on the Zilla.
@@mj350gt2 yea it should feel nice with all the supporting mods im getting installed now.
Damn bro that shit snapped clean off😅
@@chriscanela8490 for real lol
You seen what I did for the chassis stiffening. If you do what I did this is less likely to happen?. doesn’t mean it still can’t. That’s why I named it project tighten up. I wonder if driveshaft shop makes axles for our cars.??
I did see. I purchased quite a few things this time around and going to install proper 2 way Coilovers. No one makes axles for our cars yet. The axles are quite beefy tbh compared to the others found in the FM platform and these are not the same as 370’s so we can’t just buy upgraded 370z ones.
This time around it should be fine with the stuff I’m doing now. I don’t think it will break again unless I do something stupid lol
@ wheel hop! Has gotten me more then once in my dodge neon drag car and my srt4 neon. So I learned the hard way as well. And I reached out to drive shaft shop and they made some for me. Thu I don’t plan on going so extreme with the Z I learn the importance of tightening the chassis we needed to limit the chances of it happening! You got this bro. Can’t wait to see you 9’s my eyes are on you bro!! 🔥🔥🔥♥️
Would much rather break an axle than a trans lol you'll be good after a few upgrades!
Big facts! Lol
Minor setback for a major comeback 💪🏽💪🏽
@@Sleepyq50 💯💪🏽
Time for a Supra. 😂
I wouldn’t get a Supra just for going through this lol
If dealers weren't going crazy with the prices of the new Z, we as a community would have had so much more support for this car. It's sad really.
@@007gir yea they helped screw up the sales volume for sure.
People will come around to it soon. All models are basically at 10k off already. I think the interest rates are just too high for most to want to buy in.
@ZillaFullBoost i agree, as soon as the interest dip and the car market correct itself more ppl should def buy in.. including me
Damn i missed out being there that night, i was hoping to hit 10s with this nice ass weather🥲 but dang that launch is spicy!! Fix her back up so you can break a record next time🔥
@@TheGennessy the air was lovely! I hope to have Ghost running again by Jan hopefully In Time for our last cold front.
Breh you cracked your diff too 🤦
@@deadstockflaco Yea bro sucks lol.
Damn that was sad.
For real. I need to build me another one of those crates you got from me the other day lol
@ZillaFullBoost come get the crate. I won't need it in a while.
@ it’s ok I built one already. Shipped it out today.
Sucks bro
Manifest positivity
If you think negative my mom says you will manifest it
So always think positive bro
Cono that’s going to cost 😢
I shouldn’t have said anything that day lol
It’s all good bro
Think positive always no matter the outcome
maybe all those bimmers brought you bad luck...
Lol
Simple dont run a radial, run a slick.