Richard Petty used to turn all his gauges so that when reading NORMAL, all gauge needles would point straight up. So, at 190mph he didnt have to actually READ his gauges, just note where all the needles were pointing. !
They have super short lead times, just picked up a kit since Dakota had 16 week leadtime! I couldn't wait on this build so I got there performance 2 backlit with blue when you hit the lights!
You know there's areas where GPS doesn't work, right? You just won't have a speedometer there lol. There's a lake nearby me that I like to go to sometimes - No gps out there. Lotta roads in the area, no gps.
The bright light indicator in located on the factory speedometer how was this handled? I've discovered another manufacturer that makes very similar gauges that have optional turn and bright light indicators, only thing I've already purchased the oil volts temp & gas gauge's from Holley...
The holley gauges look like they have to made by speedhut, they look like they are based off the same gauges with holley branding. I prefer the speedhut because you customize them anyway you want and add your own custom logo and not be stuck with it saying holley
@@johnnyboy859 if you aren't going to run a Holley ECU, you'll have to make sure you get their "analog" version gauges though, at least for the oil pressure and water temp. The rest should work fine. However, if you want it setup nice, the terminator x max is definitely the way to go!
The oil pressure gauge not working with the Sniper EFI is a dealbreaker for me. Almost pulled the trigger until I read that. Wish there was a way to make it work. What Holley EFI are you running?
@@peleger1 I ended up going with Dakota digital. It came with a sensor I screwed into the block. If the Holley analog gauges had an oil pressure that worked with the efi or I could somehow use a sensor to make it work I would have went with Holley.
@@gasratzcustoms lol, not a very cost effective option when you add the price of a new ECU and wire harness. Thanks for responding. I'll have to go with different gauges.
@@gasratzcustoms I found out Holley does make those as standalone analog gauges which don't require the ECU, however they are about $90.00 more per gauge and come with sensors. I'm going to give them a try. Thanks for the demo of the gauges in your video!
Depending on what you order and the options you probably looking between $800 to $1000. They are very nice and are worth it for the easy install and programming options.
you would have to run the "analog" versions that have their own respective sending units and inputs, instead of the EFI gauges if you don't use the holley setup. The EFI gauges are designed to be a CAN bus setup that works specifically with the Holley platform.
I would love to do this to my old truck... lots of info you provided in the about section, so much it looks like you ran out of room there. How much will this setup cost a regular guy ? Great days to you and yours Mark !
Love those
Thank you! Probably one of the best upgrades!!! Thanks for watching and commenting
Holley needs to make a 6 piece kit. I'm not going to spend 2K on gauges
Long live the long box!
Ohhh yeah!
Richard Petty used to turn all his gauges so that when
reading NORMAL, all gauge needles would point straight
up. So, at 190mph he didnt have to actually READ his
gauges, just note where all the needles were pointing.
!
Yeah, We called our friends over at Holley & asked them
what they had and they said-
'How much you got? '
!
Nice truck boys. The work put in is Def showing.
Thank you! Greatly appreciate that!!
New Vintage USA has been making a set like this for like 10 years!!
They have super short lead times, just picked up a kit since Dakota had 16 week leadtime! I couldn't wait on this build so I got there performance 2 backlit with blue when you hit the lights!
That’s awesome!!!
You know there's areas where GPS doesn't work, right? You just won't have a speedometer there lol. There's a lake nearby me that I like to go to sometimes - No gps out there. Lotta roads in the area, no gps.
Holley should make tha same for silverado obs 1989-1994 like those ones ASAP because dakota didn’t like them
Thinking about doing this on a 78 c60 im building.
Like that truck
Thank you
The bright light indicator in located on the factory speedometer how was this handled?
I've discovered another manufacturer that makes very similar gauges that have optional turn and bright light indicators, only thing I've already purchased the oil volts temp & gas gauge's from Holley...
The holley gauges look like they have to made by speedhut, they look like they are based off the same gauges with holley branding. I prefer the speedhut because you customize them anyway you want and add your own custom logo and not be stuck with it saying holley
wow, Lucky let him use his favorite tool
🤣🤣
Did you ever figure out what cam was in the truck?
Still not sure.
So not all those light cover are steel. Some are plastic and flimsey.
What trans do you have? Did you use a block off plate where the speedo connected?
4l60e trans. Speedo is GPS no wires
Hi
I know this is an old post but could you send part numbers on these gauges?
Its been a while, don’t have the part numbers but check out Holley s page
Can you change the Color? Perhaps Dim them? They seem very bright.
Yes they can be dimmed
Hmm!! Cool! I wonder if this will work out with an LS swap kit.
it will work!
Yes it will.
@@mathewshackelford8037 thanks brother!!! Its my first ls swap!!! I want my truck set up niiiice!
@@johnnyboy859 if you aren't going to run a Holley ECU, you'll have to make sure you get their "analog" version gauges though, at least for the oil pressure and water temp. The rest should work fine.
However, if you want it setup nice, the terminator x max is definitely the way to go!
@@mathewshackelford8037 so the terminator Xmax is made by holley?..
Love the gauges, I'll soon be doing my 87 R10.
Where did you get the black steering wheel?
The steering wheel is from Foreversharp Steering wheels. Use the code “Gasratz “ and get 10% off
The oil pressure gauge not working with the Sniper EFI is a dealbreaker for me. Almost pulled the trigger until I read that. Wish there was a way to make it work. What Holley EFI are you running?
Seems crazy and doesn't make sense to me. I have the sniper efi on my 70 pontiac and oil pressure reads just fine
@@peleger1 I ended up going with Dakota digital. It came with a sensor I screwed into the block. If the Holley analog gauges had an oil pressure that worked with the efi or I could somehow use a sensor to make it work I would have went with Holley.
Amigo buenas tardes tengo una c10 igual aquí en Venezuela como para comprar esos relojes para el cluster
What Holley gauges could I use to replace my factory dash in a 2008 GMC sierra
I would visit the Holley website and see what options they have. You will need to know what size and what type of gauges you need.
Does this set work with the stock ecu in the 1987 Squarebody?
It should!
Did not see a fuel gauge
Yes, fuel gauge is there.
@@gasratzcustoms
Yes I did finally see it, thank you
The gauges and the install are great!
I didn't see in the video where you hooked up the canbus, did you wire it to the stock ECU or did you run a aftermarket ECU?
Its a Holley ECU and plugs right in! It was hard to show this because it was under the dashboard
@@gasratzcustoms lol, not a very cost effective option when you add the price of a new ECU and wire harness. Thanks for responding. I'll have to go with different gauges.
All good!!!
@@gasratzcustoms I found out Holley does make those as standalone analog gauges which don't require the ECU, however they are about $90.00 more per gauge and come with sensors. I'm going to give them a try. Thanks for the demo of the gauges in your video!
The gps speedometer is crap!
What do you do when entering a tunnel? Everybody knows there's no gps signal in tunnels...
Hold a constant RPM ? count one mississipi two misssissipi etc?
Lol
How about a video on what you had to do to wire it?
Its hard to video wiring under the dash.
Hi îm from France and got a chevy van 6,2 diesel from 1983 , do you have a tips or adress of company for buy new instrument gauge ? Thanks
Did you try Dakota Digital?
Dude i just got a 86 c10. Please how much were those guages
Depending on what you order and the options you probably looking between $800 to $1000. They are very nice and are worth it for the easy install and programming options.
@@gasratzcustoms nice thats not bad for that setup. Thanks alot
I have the fi tech ego system Will these gauges work with Fitech system?
No, these are Compatible with the Holley products.
Can you run these gauges with a carburetor engine? And will they work for an ls swap 6.0 lq4 with no Holley setup?
you would have to run the "analog" versions that have their own respective sending units and inputs, instead of the EFI gauges if you don't use the holley setup. The EFI gauges are designed to be a CAN bus setup that works specifically with the Holley platform.
Can you use the gps speedometer while maintaining use of the Holley 3.5" screen?
Pretty sure, Yes the speedometer is gps but needs power
Were you able to get them all centered? Was there much of a gap between the bezel and the gauge face? Thanks!
We got them dialed in. Took a little shaving off the backside of the bezel.
I would love to do this to my old truck... lots of info you provided in the about section, so much it looks like you ran out of room there. How much will this setup cost a regular guy ? Great days to you and yours Mark !
Thanks for watching. The cost for all the gauges is around a thousand bucks but is comparable the other options as well.
@@gasratzcustoms would this work on a 1983 c20?
It should. Just need to measure
I'd love to see a cheaper way to go since I bought my 76 for $5,000. Throwing over another grand into it for guages doesn't make much sense for me.
@@peleger1- Good old school fat tach and a three pak for like $200
What are the Gauges sizes ????? the 4 small and the 2 big ones , Please reply soon thank you
Its been a while but check the Holley website and see the options. We had to get was was close as possible
HOW MUCH FOR A SET?
Do you need Holley EFI to use these?
Yes its connects to the Holley Computer
Can you modify a set for my truck?
Its not to hard to do! Give it a shot!
What size speedometer is that 3 3/8 or 4 1/2
It’s a 4.5 in size, speedo and tach. Thanks for watching 🏁
Thanks
Not sure when they started to use plastic diffusers but my 86 is plastic
Is there any way you can put the part numbers for all the gauges please and thank you
Part# 553-128
Part# 553-127
Part# 553-126
Part# 553-133
Part# 553-121
Part# 553-125
Part# 554-130
Part# 553-140
Part# 553-141
Part# 553-144
How much was this setup
It’s probably around $1200 . Depends on the options you select
Would these gauges work with just a regular holley sniper efi ?
If you have a Holley ecu
I got a 1987 c10 I got terminator x with the truck I bought these gauges how do I wire it to come on with the key
You need to hook it up to key power. One wires excites it and lights en up. I would have to look at the instructions again ;)
@@gasratzcustoms where is a good keyed power
How do you like your coil overs man? Do you recommend them?
They are great!!! Very pleased!
Do they dim when you turn the lights on?
No sure, we set it up that the come on all the time when key powered
What you do for turn signal ?
If I have the terminator x , do I need any additional module to make this work ?
I used stock turn signals. If you have Terminator X you just need to order the gauges!
Turn signal hell there's no fuel gauge
@@derrickbasenberg811 Fuel gauge is bottom left...
Because your engine WILL go to 10,000 RPM, once.
Nah, it's still DD FTW...
Have a c20 1974 crew cab shorten frame short bed lq9 t400 gear vender ! I like the dash hoq much im tight