Too bad that your new favorite method, the Zerodust has just been the subject of much debate and research in the community. It seems that the gel might leave a residue on your stylus assembly that is sticky and problematic. It hardens and cakes on more dust which is hard to clean without strong solutions. Look it up.
I've heard some of these concerns bubbling up as well @Leon. I'm watching the conversation and have gone back to my stylus brush for now. Things change and it's a learning process - which keeps it interesting! Thanks for bringing this into the conversation.
I suggest using BOTH methods. The stylus brush first followed by the Zerodust to cleanup any residual particles thus minimizing the need to clean the Zerodust quite so often. Think about it!!
Any thoughts on the new information circulating that the Onzow and other similar products leave residue gel in your stylus? I have one but am affraid to use it now.
Hi! Yes - I used the Onzow for a couple of years and then began to see the reports you mentioned. Although there's nothing conclusive and I read conflicting accounts I'm playing it on the safe side and not using it. Coincidentally, I have a video coming out on Friday that speaks to another stylus cleaning method I tested out.
When i bought my last stylus, which was way more expensive than i had planned, i started using Audio Technica stylus cleaner fluid, as suggested by the seller. The combi of a stylus brush for everyday use and a weekly wet clean has now become my standard routine. Stylus looks clean as can be!
@@TheJoyofVinylRecords I had heard that including a link almost always gets a post removed? But maybe not the OPer? Or I would have. Yes the report made me put my Zerodust away.
I personally use the Audio Technica AT618a stylus cleaner. It doesn't use the same gel like the ZeroDust. It's more like a putty, and it works well in my experience. However, I still use a wet-stylus brush, every so often, just to be sure. I have an electronic microscope, is I can check my stylus, but I'm not shy about using a can of compressed air.
I have a USB microscope attached to my plinth and focused right where the stylus rests. I can see it up close after every play! Not a pretty install! But working on that! And how bad the stylus looks after some plays? WOW!
Often, when you buy a new cartridge, they will include a small stylus brush. I’ve used this continuously, with good results. When the stylus is especially dirty, like you, I use the Zerodust. I have been using this for a long time now, and I have NEVER seen ANY buildup on the stylus after using it. I’ve tried other gel stylus cleaners, but none of them were as good as the Zerodust. One thing that NOBODY talks about is how a dirty stylus can add to the clicks and pops you hear from a record. Everyone just talks about how clicks and pops are caused by a dirty record, or even damage to the vinyl. But a dirty stylus will do the same thing. One more thing about the Zerodust: it’s VERY important that you clean it after every use, even if you don’t see any dirt on it. There’s always some crud that your naked eyes can’t see. And if not cleaned, it will build up and make the gel less effective.
no those gel type cleaners are not good they leave residue behind test have shown. you want to use green emery paper as well to polish the styli can get strips from Linn. good to polish the styli before you use it because most styli are not polished.
I use the Zerodust and a brush. I've heard the rumors too, but I found this video using a Zerodust and a digital microscope. ruclips.net/video/WQCkN8K2rC8/видео.html. I think the Zerodust works pretty well, but use a between plays, and the Zerodust maybe once a week.
I use dry cleaning methods only... I have tried gel and liquid ; they leave a residue
Too bad that your new favorite method, the Zerodust has just been the subject of much debate and research in the community. It seems that the gel might leave a residue on your stylus assembly that is sticky and problematic. It hardens and cakes on more dust which is hard to clean without strong solutions. Look it up.
I've heard some of these concerns bubbling up as well @Leon. I'm watching the conversation and have gone back to my stylus brush for now. Things change and it's a learning process - which keeps it interesting! Thanks for bringing this into the conversation.
Your honeymoon with the Zerodust will soon end. The gel will start to breakdown and eventually loose it's stickyness.
Stylus brush every time front to back. gently👍😊
@Trevor Dennis - Just added a disclaimer on the gel until further notice.
I suggest using BOTH methods. The stylus brush first followed by the Zerodust to cleanup any residual particles thus minimizing the need to clean the Zerodust quite so often. Think about it!!
Any thoughts on the new information circulating that the Onzow and other similar products leave residue gel in your stylus? I have one but am affraid to use it now.
Hi! Yes - I used the Onzow for a couple of years and then began to see the reports you mentioned. Although there's nothing conclusive and I read conflicting accounts I'm playing it on the safe side and not using it. Coincidentally, I have a video coming out on Friday that speaks to another stylus cleaning method I tested out.
@@TheJoyofVinylRecords Thanks for your answer. Looking forward to the new video. Congrats on your page. Very insightful and informative.
When i bought my last stylus, which was way more expensive than i had planned, i started using Audio Technica stylus cleaner fluid, as suggested by the seller. The combi of a stylus brush for everyday use and a weekly wet clean has now become my standard routine. Stylus looks clean as can be!
I'll have to check that out. I use a stylus brush now as well but without fluid. It's worth me looking into.
Do some follow up on it. Very recent actual tests are showing it to leave a residue that becomes almost unremovable!
Michael Fremer reported on it in Analog Planet last Nov.
Thanks @Glenn Curry - I'll check the report out. Putting a disclaimer on the video pending further info.
For those here interested - the analysis @Glenn Curry referenced is here. www.analogplanet.com/content/time-put-away-onzow-zerodust
@@TheJoyofVinylRecords I had heard that including a link almost always gets a post removed? But maybe not the OPer? Or I would have.
Yes the report made me put my Zerodust away.
I personally use the Audio Technica AT618a stylus cleaner. It doesn't use the same gel like the ZeroDust. It's more like a putty, and it works well in my experience. However, I still use a wet-stylus brush, every so often, just to be sure.
I have an electronic microscope, is I can check my stylus, but I'm not shy about using a can of compressed air.
I need to invest in and electronic microscope. Thanx @TBNTX
I have a USB microscope attached to my plinth and focused right where the stylus rests. I can see it up close after every play! Not a pretty install! But working on that! And how bad the stylus looks after some plays? WOW!
@@glenncurry3041 I would love to see what that looks like if you ever get the chance.
Often, when you buy a new cartridge, they will include a small stylus brush. I’ve used this continuously, with good results. When the stylus is especially dirty, like you, I use the Zerodust. I have been using this for a long time now, and I have NEVER seen ANY buildup on the stylus after using it. I’ve tried other gel stylus cleaners, but none of them were as good as the Zerodust.
One thing that NOBODY talks about is how a dirty stylus can add to the clicks and pops you hear from a record. Everyone just talks about how clicks and pops are caused by a dirty record, or even damage to the vinyl. But a dirty stylus will do the same thing.
One more thing about the Zerodust: it’s VERY important that you clean it after every use, even if you don’t see any dirt on it. There’s always some crud that your naked eyes can’t see. And if not cleaned, it will build up and make the gel less effective.
Great point about a dirty stylus often being the cause of the pops and clicks. It definitely is a major contributor,.
no those gel type cleaners are not good they leave residue behind test have shown.
you want to use green emery paper as well to polish the styli
can get strips from Linn. good to polish the styli before you use it because most styli are not polished.
Agreed @Hoobs mr groove . I added a disclaimer to the video a week or so ago that states as much.
@@TheJoyofVinylRecords ok
I use the Zerodust and a brush. I've heard the rumors too, but I found this video using a Zerodust and a digital microscope. ruclips.net/video/WQCkN8K2rC8/видео.html. I think the Zerodust works pretty well, but use a between plays, and the Zerodust maybe once a week.
I meant to say use a brush between record plays and Zerodust weekly on average.
I'll have to check that video out. I also subscribe to his channel but must have missed that when it came out. Thanks!