Diagnose & Fix ABS/ASC Warning on Mitsubishi Lancer, Outlander, ASX, Inspira.
HTML-код
- Опубликовано: 25 авг 2024
- How to diagnose ABS and ASC warning on Mitsubishi Lancer, Proton Inspira, Outlander and ASX. DTC C2116 and C2100 Pump Motor Voltage Low. Check engine light not on. ABS and ASC error remains even after clearing. Warning caused by stuck ABS pump motor brushes.
I love people like yourself, that know how to fix and shares the solution. Thank you for using the Internet to help others 🙏
Your fix worked exactly as it did in your video (2009 ZH Outlander). You saved me $thousands. Thank you.
this vid just saved me money and comments helped me understand why it happens, due to the brushes stuck in carbon, I had to bring mine to inspection and it gets failed if ABS light is on, did the soft hammering and after turning the car on and driving a couple meters the light went off and then inspection was done and cleared, thanks for the video mate, this took a weight off my back.
Hey, thanks for your comment. Please could you tell me if it's still working or if the lights came back on.
Just did it, worked for me will see how long it lasts, and if it happens again just give it another tap. Cheers.
Hi Brad, thanks for your comment. Please could you tell me if it's still working or if the lights came back on.
This really works 😂 thanks for the video 😊
Just done it, It really works, took my 2009 Lancer 2.0L for a drive and abused the brakes ABS warning is gone
Maravilloso cideo, si funciona ! Yo estaba oreocupado por gastar ya que he tenido muchos gastos rj estos dias por enfermedad pero esto me hace sentir mejor, me alegro el dia ! Gracias SI FUNCIONA
Had same issue with my 2012 Citroen C-Crosser ( outlander) , tried this fix and it seems to have worked🤞 if in doubt....give it a clout😂 thanks for posting❤
Outlander 2010 here o/ I saw this video months ago, even had the car at a workshop and they said $2000 to fix the ABS Pump (install a new one), i pretty much tried this for fun; and it fucking worked 😅🥳
You’ te a genious ! I have this problem from few years and i try this today , and it solved ! :))))
Nevermind , after a hard brake the error is again there :))))
Glad I saw this.. strangely 2 of my cars have this error within days of each other.. I thought someone was trying to kill me!
Lmao mob style cut the brakes
Guys if you want to know why the abs module worked again,is because there is 2 carbon brush under that cover which is gonna stuck in a position after a while,so in my case the abs symbol poped up and off but i removed that black cover and i cleaned that 2 carbon brush and it worked again.Before it i put the abs module under 12 v and it didnt moved but after cleaning the brushes it started to work again.
I would love to know how did you clean those?
@@carljosephesteban7186 i used wd-40 and moved the carbon brushes with a flat screwdriver up and down
@@carljosephesteban7186 after the cleaning and a test drive the abs light went off by itself
Hey, thanks for your comment. Please could you tell me if it's still working or if the lights came back on.
@@akosbihari5565 do u just twist the black cover or need a special tool my abs is gone
I have the ASC/ABS light on, plus check engine light, will it be the same problem? The ABS/ASC/Check engine lights goes on and off.
Same here. First the ABS and ASC went off leaving the Check engine. 24hrs later I drove for 40 mins, the Check Engine went off.
Procedimento de reparo número 1...!
Thanks
Thank you sir it worked
Hey there, i have both notifications on outlander sport 2016. But the issue is that i cant drive. The wheels appear blocked. no matter if i put it on Neutral Mode, still blocked.
Do you have same issue? Any suggestion before to go to mechanical help?
thanks god, this is superb!!
Починил , но к сожалению это может под..ать в любой момент в дальней поездке. У меня так с датчиком abs было. 🤔
I recently got this problem to but is a bit different... Is happening randomly... When I start my car my steering wheel error appears and after the ABS error appears, the sterling wheel feels hard instead of being soft when turning, after I pass 100m and stop the car and turn it on again the problem is fixed, my problem itself is my ASC error won't go (recently changed the steering wheel sensors) wick might cause these problem or either the pumps starting to malfunction... What I can say is a 15 yrs old car things start to happen but no one good to fix em
Nice where did you get this diagram
Saya punya pon kena mcm ni abs... Lampu gmbar air pon hidup je...
Macam mana buat sir?
so you tap it with a hammer and then just GOOSE it in Drive??
The problem has come back after 1 month.. I think i need to clean my sensors?
Mite hav to try that as my abs service required is on but goes off and comes back on
The Carbon brushes is stuck under that black cover on your abs pump
Hello guys I have a similiar problem but a different way, turning all warning lights on (ABS,ASC,Parking Brake, Steering Wheel...)
Also seat bealt is locked in but says it is not, steering wheel is so hard (electronic system doesn't work, air conditioner starts by himself and can't turn off, speedometer doesn't work, doesn't show how much km left in the fuel tank.
But sometimes i have no any error it is working very well.
Please if can anyone give any idea i would be gratefull. Mitsubishi Service tried to find it 4 days but they couldn't.
Any updates ? Same problem
Did you have any changes in the electrical wiring? Or recently had something major replaced? Mitsubishi electrical wiring/ fuses are extremely precise and sensitive. Any deviation whatsoever, even adding a remote starter to a line, can cause trouble. It MUST be done very carefully.
Often times mechanics will reconfigure your wiring and bypass the original electrical set-up. In other cars, this may be just fine. But not in the Mitsubishi! All appears to run fine until you start something else, and suddenly it affects another completely unrelated item, or the entire car will shut off and keep blowing fuses, etc.
Solution: Only Mitsubishi's Master Mechanic can completely rewire the car correctly to the original set-up. This is a last resort. It takes HOURS of time/labor. That is why often the manufacturer cannot find it right away. This is a special, unique skill done only by their Master Mechanic, who understands Mitsubishi's electrical schematics.
Same problem with my car also
👍👍👍👍👍👍👍👍
I own a 2008 Evo x MR I recently had the abs light on took it kt motoring since its 10 min away from my house they changed the speed sensor in one of the wheels and the problem was gone until now the light is back this time I changed both sensors from the front abs light still persist will different tire brand affect the abs light please help I don't wan to drop another 1k and have the problem come back soon
There are so many other parts that can cause this - faulty ABS module, G-Force sensor, steering angle sensor, damaged wiring, etc. Use an ABS capable scan tool to pinpoint the issue. Tyre brands shouldn't affect it, but different tyre sizes can cause issues.
@@myautodiy1640 saya punya naik segala error. Asc, transmision over heat, engine over heat, engine service, abs service semua naik. Kenapa tu ya?
This can’t be right. Did anyone try this to get the abs pump working.
I did 2 days ago... it worked like a charm
I did this just now at 19.11.2023, counting now, and will reply when the next light comes in.
@@leezhenxiang4146 hi still going strong?
@@raym3325 tough, a day need to knock it twice or trice for 3hrs + journey
It doesn’t work
my lancer makes a weird whining noise when accelerating after 15 minuets of driving anyone know what this is?
Petrol/diesel?
Does it really work
This occurs because the motor brushes gets stuck due to carbon. Knocking the enclosure will release the stuck brushes. Not sure how long it'll last before it gets stuck again. Mine is still good after 400KM.
@@myautodiy1640 thanks bro
Just tried this a moment ago. Missus called me the other night in a storm and told me about the lights that had come on and I thought it might have been a fuse or some water. Had a look at this video the next morning, finally tried it today, took 5 minutes tops including fetching the little mallet from the garage. Drove it up the block and all good except engine check light still on. Turned it off. Started it again and the check light went out too. Bloody Brilliant. Don't care how long it lasts, as long as it makes it to the dealer on Thursday for the trade-in that was already arranged during the afternoon before the storm :)
Did you try to tap the pump
Can we change or replafe that abs brush instead?
Got to find a shop that does it professionally. You can replace the brushes yourself if you know how and have the tools, because to do that you'll need to grind off part of the metal/aluminium seal to remove the black cover. Then mounting the cover back is the problem. Got to weld or use strong adhesive.
HILARIOUS 🤣
How long do you suggest to hit it for? I have a code P1773, is this related?
I doubt it's your pump. That code is very vague. If erasing it doesn't solve it, and your ABS lights are on, start by checking the wheel sensors.
Same as my car 2012, tried to clear code many times doesn't work
your joking right 😂
P.Inspirapura Evo Cetak Rompak Bodykit Muka Xmalu Mengada2 Tiada Kemaluan🤡