I GAMBLED on a BMW From Across the COUNTRY!
HTML-код
- Опубликовано: 29 авг 2024
- Well, well, well... what do we have here?! Finally, a donor car for me to pull the engine from to get my 135i back on the road. And boy, it was full of surprises 😬
ENTER THE DOC RACE INTAKE MANIFOLD GIVEAWAY: bimmerstreet.c...
🌟 Support me on Patreon: / jake_spence
📷 Follow me on Instagram: / jakespence
💰 Donate to the channel: bit.ly/2HhSDAZ
MODS on this 335i:
- 19T Twin Turbos: ebay.us/Hw4vpR
- ARM Turbo Inlets: bit.ly/3HGWCFf
- ARM Charge Pipe & TiAL BOV: bit.ly/3jKYyEH
- ARM 3" Catless Downpipes: bit.ly/3pLRiII
- ARM 7" Intercooler: bit.ly/3Ymmldi
- ARM Turbo Outlets: bit.ly/3HKxvBt
- N54 Oil Catch Can: bit.ly/40E3UlL
- N54 Vacuum Hose Relocation Kit: bit.ly/3YgWnHN
- E90 Black Front Grilles: bit.ly/3I8G2zl
🚀 2008 BMW 135i (752whp/691wtq) 🚀
Complete Build Log: my1series.com
PERFORMANCE
- Doc Race 6266 single turbo kit: bit.ly/3h2pfDC
- Doc Race intake manifold & PI kit: bit.ly/3h2pn64
- TiAL Q blow off valve: bit.ly/3HoDNrX
- VRSF 7.5" Race intercooler: bit.ly/2vLjvm8
- PR ignition kit: bit.ly/3g3cMea
- PR Stage 3 fuel pump: bit.ly/3UGYvGq
- PR upgraded fuel feed line: bit.ly/3BhWOsb
- NGK 97506 spark plugs @ 0.022": bit.ly/2TvoDVQ
DRIVETRAIN
- MFactory 3.08 LSD: bit.ly/2ZqtxK9
- DSS 1000HP axles: bit.ly/3hbQFXB
- BMS differential brace: bit.ly/3ihgF1G
- Powerflex differential bushings: bit.ly/3coGOFG & bit.ly/2RJ5aC8
- Redline 75W90 differential fluid (2 qts): amzn.to/2J6pPt7
SUSPENSION
- Eibach Pro-Kit lowering springs: bit.ly/2HFyfqm
- M3/1M front & rear control arm kit: bit.ly/2yomLbC
- BimmerWorld M3/1M front control arm bearing upgrade: bit.ly/2NM5A9Z
- BimmerWorld solid rear subframe mounts: bit.ly/2Hr9TmL
- BimmerWorld adjustable rear toe arms: bit.ly/30L18fi
- BimmerWorld rear camber arm bearing kit: bit.ly/325UbFJ
- ECS Tuning performance rear trailing arms: bit.ly/30B5PYO
- BimmerWorld rear trailing arm bearings: bit.ly/2L057z3
TUNING
- JB4 tuner: bit.ly/2t8Hevi
- JB4 Bluetooth connect kit: bit.ly/2DXGOOH
- JB4 port injection controller: bit.ly/3eurBEO
- Free JB4+MHD flashes: bit.ly/2V79udi
- MHD flashing cable: amzn.to/3cqNpPQ
- OTG USB adapter: amzn.to/2qKvc9R
TRANSMISSION (MANUAL)
- XClutch ceramic twin disc clutch: www.xclutchusa...
- RTD chassis-mounted shifter: bit.ly/2vIKzm3
- Poly transmission mounts: bit.ly/3bgkKNs
- Upgraded clutch delay valve: bit.ly/2LudXYd
- BMS clutch pedal stop: bit.ly/3eoeBRr
- Royal Purple trans fluid (2 qts): amzn.to/2VqSLqF
WHEELS/TIRES/BRAKES
- APEX ARC-8 18" wheels (Anthracite): bit.ly/2LJxkrx
- Front tires (235/40/18): amzn.to/3etsaPu
- Rear tires: (265/35/18): amzn.to/34F9LuB
- 10mm spacers (Rear): bit.ly/2LGPaLC
- Wheel stud conversion kit: bit.ly/2zPJ7mW
- Drilled & slotted brake kit: bit.ly/2TEQFmF
EXTERIOR
- 1M-style front bumper: bit.ly/2z6nzT6
- Seibon M3-style carbon fiber hood: bit.ly/2VMCedZ
- Seibon CSL-style carbon fiber trunk: bit.ly/3VWzUyg
- Rieger rear diffuser: amzn.to/3h6WiWT
- BMW Blackline taillights: bit.ly/2y1dhCO
- Sideskirt splitters: bit.ly/2vGdAyW
- Smoked LED side markers: amzn.to/2Lw5h3l
- LUX H8 180 LED angel eyes: amzn.to/3ckTPAf
- Gloss black front grilles: bit.ly/2VlvRk9
- Black BMW roundel overlay kit: bit.ly/2sZHpsv
- BMW ///M license plate frame: bit.ly/3cstK1Z
- LED license plate lights: amzn.to/2Hainkd
INTERIOR
- Corbeau FX1 Pro seats: bit.ly/2VdAP0R
- VAC Motorsports roll bar: bit.ly/2XI7flx
- NRW carbon fiber/Alcantara steering wheel: www.nelsonraci...
- NRW carbon fiber sunroof delete: bit.ly/3cpFEde
- Project Carbon door cards: bit.ly/3Y3aVuZ
- BMW Performance shift boot: bit.ly/2J5idLJ
- LED interior kit: bit.ly/2JsL79c
- Deka 17lb battery: amzn.to/2HtYYJ3
- Macht Schnell battery enclosure: bit.ly/3VHJIfM
ACCESSORIES
- BMS PCV: bit.ly/34HjnVv
- BMS oil catch can: bit.ly/2HTxsaJ
- Billet oil filter cap: bit.ly/2nDj1KW
- 3.5 bar TMAP sensor: bit.ly/3ckVJAT
- 3.5 bar adapter harness: bit.ly/34EM2dM
- BMS cowl filters: bit.ly/2l4082g
⛽ BMW OIL CHANGES I SWEAR BY
- Motul X-cess 5W-40 oil (5L): amzn.to/2HKTbOv
- Motul X-cess 5W-40 oil (1L) x2: amzn.to/2HbGpqZ
- Mann oil filter: amzn.to/2HLiPT5
- Magnetic drain plug: amzn.to/2EYwYsV
This description contains affiliate links. If you click the links above to purchase a product, I will earn a small commission at no extra cost to you. Win-win!
Don't forget to enter the Doc Race intake manifold or $1,000 giveaway! 😉 bimmerstreet.com/pages/giveaway
Damn, judging by the outside I was NOT expecting all the goodies under the hood haha. CHILLIN ON A DIRT ROAD
I think she's the definition of a sleeper 😂
Ordered my SEIBON carbon fiber BM Hood Monday. I ordered some nice black cerakoted black hood button locks & the pins that go on the radiator support are burnt 6AL4V grd 5 titanium to match all the other titanium hardware throughout the entire build! Man if I were you I’d bullet proof your old engine & put it. That way you don’t have to keep messing around! I mean technically all you need is a sick set of rods, pistons & a solid crank hub & you can put down more power with no worries…💪🏻🏁
That sounds sick, you've definitely got a tasteful build going on over there! And yeah, it's tempting for sure. I may just have to do it after I swap in this engine, just need some time and $$$.
@@jake_spence Yeah I hear ya! This stuff is expensive, especially when you start building motors. Then again who knows, you could put this other engine in & get a lot of miles out of it! You never know? I hope you do though! Hope it stays together with no issues! Yeah so I’m gonna put my hood on when it comes & put in my phoenix plenum & ignition. Then I’ll take out this summer & hit some shows & hopefully race it a few times. Then over next winter I’m gonna order the trunk lid, put in the stage 3 pump & reflex controller. Like you said this is expensive…✌🏻😂
Dude waiting to see if the car will turn over is so nerve racking man can't wait for next episode. The random memes are a beautiful touch
That's hilarious. The one light every other BMW owner has on and doesn't really care about is the one light you have off now. LOL. TPMS! YAY!!
LOL, true! And probably the one that is the least scary 😂
Dang $3500 for that condition, gives me hope about my 127k mile car in the same spec, but way better maintained. Nice purchase
If it didn't have all of the mods, I wouldn't have paid what I did. But yeah, the 335i market is still strong where I live. You can fetch $8-10k for a decently clean early model 335i as long as it isn't 160k+ miles.
Nice to see you got not an engine, but a whole car. Can’t wait to see the 1 on the roads again.
Me too! Lots more I can do now. I'm excited to get the 135 back going again.
Always a joy when i see Jake posts a new vid! Keep em coming!! Love it!
Ya'll are seriously the best, thank you for watching and commenting!!
Awesome! So glad you got a donor and looking forward to more content!
Thanks man, me too! Took longer than I thought, but now that I've got it I'm ready to get going.
Im sure! I’m glad you found one that the body is still straight and not wrecked like a lot of ones I was seeing!
Great donor car Jake. The gearbox needs the common new gaskets and new solenoids and oil. Or the torque convertor has gone by these 19t's. Have a good one, Dutch regards Nico.
Thanks for the info! I am not too familiar with these auto trans, as I've never pushed the limits of one myself. Luckily I just need the engine.
glad to see you back in the grove!!
I'm doing what I can!
At least i know I’m not the only one who goes through this after buying a cheap car. “Ahhh this might have been worse than I thought” has been said too many times.
Haha, I didn't know what to expect after taking a gamble on it without seeing it... but I at least hope the motor is good 🤞
Word for word bar for bar
A new video on a friday, what a good way to start the weekend! keep up the good work Jake
Thank you bro! I've got the next video halfway filmed already, so we should have another upload again next week.
Good thing you know a good Tire guy!!
No kidding! I just dropped off the wheels and tires for him so I can get 'er fixed.
Very nice! Let get after that LS swap!! Haha
I can't wait to get started on it with ya!
Those lights definitely just needs brakes, speed sensor and a reset of maintenance light, at least it doesn’t have a check engine light. 🤞🏽😁
I dove into all of the lights today and figured some things out lol. It's all in my new video 😎
oh hell yeah some very good part in that car damn let me know when you selling parts and the giveaway damn!!!! there gose my pay check buying stuff out of bimmerstreet😂
The parts were what pushed me to buy it, because at least I knew I could recoup some of my money if things went south. And yeah, you should enter the giveaway... good luck!
Stoked for this series!!! Can’t wait! Let’s goooo
Thank you man, I'm glad to see others are as hyped as I am lol
Yess sir! You and me are on the same boat
Stock motor gang 💪
Bro please upload more! I love your videos. And last week I bought myself a 135i 🙂
Thanks! I just uploaded another one just now. And that's awesome! Welcome to the 135i club, I'm sure you're enjoying it.
Congrats! Looking forward to more content!
Thanks for watching the vids man 👍
Thank you bro for all this content
i know us bmw guys love it 🙌🏽🙌🏽
Thank you Nando! I'm glad to see ya'll are as hyped up as I am lol
Hell ya big J! Looking forward to this
Me too! I just dropped the next video. Let me know what you think.
Gray seats 💨💨💨💨💨 busted out laughing 😂
For real tho, gray is cheeks lol
@@jake_spence cheeks..bruh 💀
Anxious for the content.
Me too lol
Deer encounter at night on a frozen road while filming. Good looking out!
Always got my eyes peeled lol unfortunately it's common out here
I just ordered a hoodie from Wilmington Delaware bro 😁
I see you 👀 you're gonna love it man, that's one of my favorite designs. Thanks for the support bro, and good luck!
@@jake_spence yay can’t wait to get it bro love hoodies
Alpina 335i?! what the hell I've never heard of that
This is a classic example of a fake badge offender, lol. Don't worry, it's not a real Alpina.
Yes, that sounds like centre support is loose or your elastic coupler is broken. I had both and yours sounds more like coupler problem.
Hope it will be that as it is a cheap fix.
I just swapped a new tire on and it is way better, check out my latest video I just uploaded!
@@jake_spence Fantastic!
I will check it out now :)
Thanks!
I think you got a good deal overall. Whole car that drives for 3500$ is not bad
That's what I'm thinking too, as long as the engine is good I'll be happy!
Would be super keen to see an LS swap E9X build - I don't think i've seen one done in-depth yet (or haven't been looking in the right places!)
That's what I was thinking! I haven't really seen one either, although I've found some good content after searching. Nothing like DIY videos tho.
PLEASE do the LS swap on it! I have an e90 I’ve been wanting to ls swap. It would be amazing to see how you do it!
That's the plan! I'm glad to hear some people are as excited about it as I am lol
@@jake_spence can’t wait!
"lumberwagon" lol
I'm not sure what exactly a lumberwagon feels like, but if I had to guess, it feels like this E90 lol
Share jakes videos jake cool guy..
Thank you man!
Lol. Don’t die in that busted car! Can’t wait to see more content.
I'll try not to! Although I just uploaded another video today beating on it lol
Ik i live in Milwaukee so i feel your pain
I'm so ready for summer and warmer weather, but it looks like we're gonna get dumped on again lol
I believe I still have an Hvac fan that's used but still good. If you want it, message me.
I'm not sure if it's just the fan, or something more! But if you want to donate it, shoot me a DM on Instagram or email me. Thanks!
@@jake_spence message sent!
What’s it got for a tune
MHD, not sure exactly what tho lol
Notifications activated
My guy 🤜🤛
Send me your Busniess class Radio when you LS swap it yours had more working pixels than mine
Random fart noises will always get a thumbs up from me
I'm glad I'm not the only one who thinks it's funny lol
Do you sell the 19t + intakes?
I'll be selling all of the bolt on parts except for the intercooler once I pull the engine.
@@jake_spence how much you want for they? and ship to norway :)
Sendddd it to the mooooon
That's the plan!
Alpine?
Fake badges, unfortunately
CAP!!! That 135 never made 800 “wheel”...
Made 752whp on the dyno, and I turned it up higher on the street. Should've been near 800whp if not more.
Loss me at LS swap; however, gotta create content.
Yessir! It'll just be one part of content, still will have plenty of natural BMW content as well.
Always a joy when i see Jake posts a new vid! Keep em coming!! Love it!
Ya'll are seriously the best, thank you for watching and commenting!!