How to Make a Powerful Rotary Tool at home
HTML-код
- Опубликовано: 26 авг 2024
- Learn how to make a low cost powerful rotary tool at home using material like 9 volt motor, 9 volt battery , plastic bottle and metal plat. almost material you can find from home or junkyard.
Note : Safety and Creativity can not be separated. So keep them together.
Facebook: / awesomecreativeideas
Thank you for watching Junkyard. 
Хобби
Safety and Creativity can not be separated. So keep them together.
+Optimus Prime
What?
that thing is super un safe
Broken Arabic,,XD ,,,,, I can help ,,,,20% :)l
+Junkyard - Origin of Creativity_hello, speak spanish, hablas español
this shit is not safe
Паяльником делать отверстия,а провода цеплять скруткой-это круто!!!Молодец!!!
Happy Tree Friends :)
A gwóźdź tnie się piłką do metalu ..
Nice to see somebody actually do something other than complain. Good job.
The blade is attached with shaft by screw and then extra strength is provided by high strength epoxy adhesive . so don't worry blade will never escaped. It is safe.
You could also make some shallow cuts on the saw or rasp it up a bit so it can cut and grind.
you live in a fantasy world
Its far from safe m8
+De Farlige D
what's the metal used for the blade?
What a useful tips to make a rotary on our own. Creative and very inspiring. Thanks for sharing..
Estupendo vídeo. Lo utilizaré en mi próximo curso como compendio y ejemplo de todo lo que no se debe hacer.
I thought the blade was flimsy but when you tried it on a nail, i immediately subscribed.
My endorsment. Мое почтение. Сделаю такую на след. неделе.
That could be handy . Nice build.
особенно порадовало крепление пластилином))
Considering my last dremel cost $40 with an 80 piece bit set I can't believe I spent the time to watch that. Would like to know what the playdough stuff is like -- THAT part is impressive and I wish it were around when I was a kid.
You have really great engines at your disposal!
Gostei. A mente humana é maravilhosa, quando bem empregada .Criatividade funcional.
فكرة رائعة مشكور على المجهود
love your work I also make stuff like rc cars and planes and boats
Zrobisz jakiś poradnik który będzie przedstawiał końcówkę do wiertarki? :)
This is awesome...
you must mentioned what you use..
like moter is 12 volt high speed..
using atleast 2 amp. 12 volt to run moter..
anyways.. thanks a lot for d video...
Dude You are the Man.....
nice!
I also make videos like it.
such a high skill level, 1/5
ooooommmmggggggg!!!!!! super low cost .!!!! hahahah I can make one too . thank you for the idea.
Музыка клёвая, для всех кто ширнётся и сразу этот инструмент в руки.
so nice idea.. most creative
este si es interesante idea bueno felicidez
very nice i have made one and it is so powerful
Woow, You Are My hero Now, Woooooow! I Cant believe What You Just Did There On A Video, Daaamn, I LOVE YOU NOW !!!!!!
There's a few things I'd do differently than this, but, I respect what you're doing, which is showing you can make tools from nearly anything, very respectable!
I would really, really like to implore you in future builds to add a switch to the circuit instead of just wiring the power direct like that?
Ez szemét és életveszélyes !!!!
well done! You will be a valuable person when the zombie apocalypse happens. ;)
wooowwww....amazing 👍
Hey. great work. i'd recommend two things. Search ebay for some cheap Rotary Tool Chuck and Rotary Tool Cutting discs. now mount the chuck somehow. this will improve safety a lot for less than $15 which granted doubles the cost (or close) but it is still manageable. you can also salvage the chuck from a dead drill.
gracias amigo, me es muy útil para hacer las autopsias en el trabajo
На скрутках всё, хотя паяльник нужен ведь для проделывания отверстий в пластиковых бутылках :) но мне канал нравится, удачи!
very good & useful.
nice work man
very impressive
Den je Nederlands?
can you make one of these
it is to good for our home and it is easy
Когда он пластилин достал даже мой кот засмеялся
Es pequeña pero no descuidar la seguridad guantes todo el tiempo saludos.
Très bonne idée !
Ingenious, but one of my concerns would be the fact that you enclosed the motor and in effect cut off any cooling air circulation. When I'm working a model or polishing, I'm running my Dremel for prolonged periods of time. You can feel the heated air escaping from the cooling ports .Other than that, pretty neat.
That was amazing, i was surprised
you are great person
nice.very powerful
BEST PROJECT
the amul cold coffee bottle gave me giggle
deberias ponerle un protector al disco para proteger las manos en caso de un accidente
muy peligroso asi..saludos
Muito legal! Parabéns pela criatividade, +1 :)
no começo achei que só iria ficar vibrando muito e fazer barulho....mas provou na pratica que a gambiarra funciona muito bem! hehe parabens!
+Giovane Fortuna MUITO CRIATIVO E MUITO ÚTIL TB.
+Ronaldo Santos há
MR.Junkyard,,,Great job some of these people dont understand that maybe this is a (Prototype) Keep up the good work-!! Let me ask you a question,, what is that gold part you put on between the blade and the motor-?? And where did you get it-??--** THANKS **
where did you find the engine please and your videos are good very good
nice fence pliers
holy hell you actually powered it on, its gonna explode bro
very good and the best actor
make one about hydraulic press that would be great
i like it so much
nice job 👍😉
Interesting project, the one thing I would do to improve upon it is to harden the saw-blade with a propane torch. Otherwise, good job.
That blade is gonna fly right off and cut a small child's arms off lmao
video should be rated over 18 - if some kids see this they might build it and get severe injuries :(
I didn't see you solder the connections to the motor, switch or power jack. Did that get missed in the video?
+Rich Trost use one from switch and other from dc jack
вещь не безопасная и заниматься такими поделками не советую.
+малик магомедов он лезвие крепится с помощью вала с помощью винта , а затем дополнительная прочность обеспечивается высокая прочность эпоксидным клеем . так что не волнуйтесь лезвие никогда не убежали. Это безопасно.
+Junkyard - Origin of Creativity вы эпоксидный клей в глаза видели? Хорошо если он там хотябы "холодную сварку" использовал, а не пластилин. Да и паяльник надо использовать по назначению. Дизлайк видео за слово "мощный" в названии.
+малик магомедов Почему это опасно, потому что у него было оборудование Техника безопасности
+малик магомедов сделал я перевести право
ceew
Good....
Commendable
verry good
Holy crap that looping soundtrack made me want to destroy my computer
do you have many motors or you use it again and again. by the way i like your vid their very helpfull
lovely grat keep it up
Aweome work yar..
I have some questions...can we connect any Dc motor to the main current with the help of an adapter??
How much rpm max each motor can give(3v 5v 9v 12v)..?
can i use a mobile charger as an adapter?
keren bang. mau tanya dong itu kalau pake adaptor. adaptornya yg gmna ya biar linstrikyg di keluarkan bisa buter maksimal ke dinamonya?
Has the soldering iron, uses it to make holes instead of solder wires
Well, those instrument could be made safer if you put something like slightly bigger half-round, 2 sided element which is fixed to the body of the machine, this could improve the safety, just like bigger ones. I still prefer hacksaw because it's way more safe to use and it can cut the same things like this tool with the advantage of being able to cut deeper and it's more silent :). Still good guide.
good work
아주 훌륭해요.
SUPER!!!!!!!!!!
اول مشاهده
Very clever
safety number one priority
+Ud4Y BOOM!
phuck ewe WHAT?
Good creativity, but please don't challenge Darvins' laws too often.
я такое собирал лет в 10.
Lord Vaders safety counsel will protect you.
wow...that's greats
Один гвоздь распилил и все зубья затупил..
Они же настолько мягкие, что их вырезали ножницами!
can you make a video showing automatic egg turner...plz?...
tell me where did you get metal sheet and 9 dc adapter and jack
Good idea
Can u tell me which metal do u use to make these types of things
Así fué mi primer taladro para electrónica. 8-)
where to buy metal plat and what to use instead of jack i am using a 12 v motor pls send the link to buy the resources
what is the of black material by which you join the motor shaft with cuter plate
what kind of motor are you using?
cause the once i get are smaller and take less power
I've seen u use it alot in ur videos. what is that (what looks like play putty) u used to keep the blade attached to the motor?
Junkyard - Origin of Creativity eu gostei muito do seu vídeo eu de um link e escrevirse no seu canal mais eu quero saber que pesa preciso para montar esta maquina
Some solder would be nice, to secure those wires in place.
for 15$ canadian dollar i got a real dremel.. With spare part..... Damn.....
What is the thing used to grip onto the thing you are cutting?
Awesome
😘👍
This shows creativity but why not solder the wires ??
Muito criativo.
What kind of material are you using for the blade