This is the only van that does not allow it to come out like on every other vehicle. Strange but probably need to experience it yourself and beat on it with a hammer like i did and nothing happened :)
You need to tap the joint towards the shaft first to expose the clip a little. Then use 2 small picks to compress the clip and second person hits the joint with the hammer.
Thank you my friend, you saved my life. Greetings from Italy.
So squeeze the clip together ? Can the clip not be punched out ?
This is the only van that does not allow it to come out like on every other vehicle. Strange but probably need to experience it yourself and beat on it with a hammer like i did and nothing happened :)
Hi there, this joint is a buggeration. I tried your method and I can't see the clip. I can just about see the channel it sit in 😢
You need to tap the joint towards the shaft first to expose the clip a little. Then use 2 small picks to compress the clip and second person hits the joint with the hammer.
@@FixingVANS thanks for the reply, we tried exposing the clip this way with a sledgehammer. Nothing worked. I just bought the driveshafts... Oh well
Really? I replaced one and it hammered off without any cutting
I deformed the whole joint by hitting it with a hammer and it still won't go down
I always thought you just pulled it and hit it with a hammer at the same time..