Fx Impact Barrel bedding+exciting new products on the CHEAP! Uhm Frugal!?
HTML-код
- Опубликовано: 22 фев 2023
- Ok So here’s another link or two!
Hunter Tactical Mags
www.huntertacticalco.com/
eBay listing for Fx Shroud Reducers
www.ebay.com/itm/175620221599...
Man you making very useful videos creative ideas waiting to receive my slug liner and tensioned system will be doing this as soon as I put my hands on them 👍
It’s Hella fun 😎 when you are smacking starlings at 185 yards! It’s pretty significant. That’s a kill zone of less than a half inch. Thanks for the comment.
It’s a beauty 😍😍 and yes I subscribed 👍😉
I did not tension my 800mm barrel with that many sections of painters tape. I did 1 in the middle, 1 on each end and then split the difference. I see where it could cause a wave effect on the barrel. I might just pull it tonight and add 4 more sections of tape. It can't hurt that's for sure!!
That’s interesting! Hey let me know what if anything changes after? I always go overboard with all my projects lol. Thanks for your comment 😎 in my minds eye, the problem I was trying to solve was the water hose kinking between your two hands when applying pressure inverse. I’m just shooting the same rifle right now for the first time after taking it apart for the video. It’s dead on -2 for 4mph wind. That’s pretty good in my book. Hey long winded me! Thanks for your comment.
I try this have not shot the gun yet waiting on some more parts but thanks for sharing 👍
Thanks for the comment. Let us know how it goes 😎
I wish I would have saw this before I started buying stuff..
Do you have a simple way you use to index your barrel?
How I do it is. Simple or not. Shoot at 40 to 50 yards or however close you need to be in order to keep it on the target. Using the same aim point. Index until you find tdc top dead center or the highest poi point of impact firing 3-5shots. Once you find the high point. Then turn the barrel 90degrees down. You will find that to be the best accuracy. Once you do that retune your rifle. Throw out all preconceived notions….. this or that is the best speed for accuracy blah blah blah. Let what you see in front of you be your guide. I always shoot the new tune for three days running with out altering it in any way before I except it as a tune I will continue to use. However barrel stabilization is the key to being able to shoot at what ever speed you want. Thanks for your comment 😎
Where did you find the shroud end caps that you screw on to add tension to shroud and barrel? I’ve looked everywhere and can’t seem to find them? Great vid!
eBay I posted a link in the description. Fyi you need to glue them in place. Or block the airflow with stacks of painters tape and screw it on after. I the 3D printed threads can’t handle 40-80fpe. They blow off. I need to post another video.
Sold out lucky me a found the same one on another listing but was the last one
@@airguns-shooter hey share the listing with the family. Make sure you glue it in place properly. Thanks for your comment 😎