![FxFanBoy](/img/default-banner.jpg)
- Видео 22
- Просмотров 85 266
FxFanBoy
Добавлен 13 янв 2020
Everything air rifle, pesting , testing, tuning. Sharing what I learned. Sharing what works. Debunking fx air rifle owners phobia. Something you won’t get from the ahaha channels ~ you have to buy this! To be cool this season. thefxfanboy?igshid=YmMyMTA2M2Y=
Видео
FX IMPACT M3 76GRAIN BOAT TAIL Slugs
Просмотров 222Год назад
dont bother with the 169yard results the sun was in the wrong POSITION!!!!!!
Hunter Tactical SSL in .22 Air Pig Trilogies
Просмотров 184Год назад
Hunter Tactical SSL Single Shot Loader #mk2 #M3 #FxImpact
Fx Impact Tension barrel system 3D shroud fix
Просмотров 2 тыс.Год назад
Here’s a link for the eBay listing for the part we’ve all been waiting for! www.ebay.com/itm/175620221599?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=e_ju8eeusd6&sssrc=2349624&ssuid=t9NEh7TvRSi&var=&widget_ver=artemis&media=COPY
Fx Impact Barrel bedding+exciting new products on the CHEAP! Uhm Frugal!?
Просмотров 1,3 тыс.Год назад
Ok So here’s another link or two! Hunter Tactical Mags www.huntertacticalco.com/ eBay listing for Fx Shroud Reducers www.ebay.com/itm/175620221599?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=e_ju8eeusd6&sssrc=2349624&ssuid=t9NEh7TvRSi&var=&widget_ver=artemis&media=COPY
Fx Impact Mk2 700mm 1100fps is it accurate?
Просмотров 1 тыс.Год назад
in this video i fail to hit the 1100fps due to the cold. but the dial ups are all the same and i believe you agree accuracy is on point. thanks for watching!
Fx Impact Maverick Wildcat liner Polishing for extreme accuracy DIY
Просмотров 4,5 тыс.Год назад
From the mind of the FxFanBoy one take no edit wonder! my version of liner polishing made easy and less expensive.
Side Effects! 60 Grain RPA slug
Просмотров 171Год назад
LePew Roll Over! Play Dead. I’d say the .30cal with the Superior Heavy Slug Liner is doing it’s job. Horrible rainy cold night. No Pole Cat’s where harmed in this Video, LePew is a Trained professional. Here’s a link for the slugs I’m using rogueprecisionammunition.com/
How to! Complete DIY Tension kit plus shroud higher performance but still back yard friendly.
Просмотров 46 тыс.Год назад
rogueprecisionammunition.com/
Fx impact m3 diy tension system Loud!!!?
Просмотров 15 тыс.Год назад
A simple solution for the loud fx barrel tensioning kit side effect LoL. Watch at your own risk bwahahaha.
Fx Impact M3 .30 cal Superior Heavy Slug Liner? Use it? or lose it!? Part 2
Просмотров 1,9 тыс.Год назад
in this video I attempt to show a range of fps starting at the high end and dropping to around 930fps. Link for the slugs I’m using rogueprecisionammunition.com/
Fx Impact M3 .30 cal Superior Heavy Slug LIner? use it or lose it!? Part-1
Просмотров 2,5 тыс.Год назад
Going down the rabbit hole. The over standard .300 cal slug liner and the Ebay slugs that work! Dont make a cool drinking straw from them yet boys.
VarmintKnockers .22 217 36grain slugs 155&175 yards
Просмотров 1102 года назад
VarmintKnockers .22 217 36grain slugs 155&175 yards
Fx Mk2 twin 700cc Alsafe bottles THE ONE CALLED AIR PIG
Просмотров 7832 года назад
Fx Mk2 twin 700cc Alsafe bottles THE ONE CALLED AIR PIG
Fx Maverick Sniper .22 26 grain Javelin Slugs @100 & 120 yards
Просмотров 2622 года назад
Fx Maverick Sniper .22 26 grain Javelin Slugs @100 & 120 yards
Fx Maverick sniper 135yards Javelin slugs dropping pigeons
Просмотров 1,8 тыс.2 года назад
Fx Maverick sniper 135yards Javelin slugs dropping pigeons
Built a similar design with the inlet screened and filters on each end. Mine lays flat and has a cap on the inlet side of the desiccant and a ball valve on the exit side. I measured inlet relative humidity of the inlet and compared it to exit humidity. It reduces moisture by approximately 40%. Moisture is now almost unnoticeable when the bleed valve is opened after a fill.
@@richardevans9530 that’s interesting. Your design completely defies logic and science. I tested the air from the bleed down on my design after filling a 130cf tank with test strips used in the medical field. And found no moisture. This zero moisture only lasts about 10months to a year and I have to replace the desiccant. But my average humidity in my area is only 41%. If I lived in an extreme humidity area I would do a two stage pre filter. None the less. Reducing moisture in coming to your compressor is saving some major wear and tear. I liken it to avoiding putting gas in a diesel engine. Neither compress very easily. Thanks for your comment.
Dam good shot man!
@@Alloutairguns thank you sir 😎
Very nice at 187 yards
@@varmintknockers thanks 😎
How much did this full project cost I’d like to duplicate it and question is that only filtering air going into compressor what about the moisture in the air after it’s compressed
@@Alloutairguns difficult to answer because I had all but the clear pipe purchased on amazon I believe but it was over two years ago. Probably around $25.00. The moisture coming out is nearly nothing but I still recommend and I personally use a after filter the whole thing only needs service once a year in the area I live with average humidity being around 70% humidity. Thanks for your comment
@@FxFanBoyso where is the breather on the dessicate contraption
@@Alloutairguns The breather filter is inside of the hose inbound to the compressor. Perfect fit. Thanks for your comment on my contraption!
@@FxFanBoy where is the system open for air to come in bc the filter looks like it’s inside the rubber tube. But the tube goes all the way to the dessicate module if that where the air enters the system at where is the opening
@@Alloutairguns I have 8 holes drilled in the bottom and a screen glued in the bottom to stop the media from falling out. instagram.com/thefxfanboy?igsh=YnUwNHB1dnQybXdr& if you have Instagram and want more information I’d be happy to help
I'm doing the exact same thing on my Yong Heng on the intake with a diy pre filter barb hose in a water jug just gotta wait on my new 66cf tank and desiccant and fittings.
Awesome. 😎
I’m not sure I understand why you have to do this if you’re buying an expensive gun or a new liner. Why doesn’t the factory do this for you and then ship it to you?
Very good point. I wish they did. But it seems as though it makes a huge difference in all the testing I’ve been doing. Case in point up to date. I just received a Western airguns rattler 357. Four days of shooting and it has a major failure. Why would a rifle that costs 2700$ fail in four days of use? My answer is! They are just expensive tinker toys.
@@FxFanBoy : Personally, I would contact the manufacturer and tell them why did this happen on a $2700 Airgun? It’s kind of similar to these exotic cars that cost a lot of money, but when it comes to reliability they’re crap.
It’s that adapter no longer available? I followed the link and it comes back to nothing
He’s deleted it from eBay and put it back up so many times I can’t keep track. Thanks for your comment 😎 so just put fx impact in as a search. If it is available it’ll pop.
Thanks man
You are very welcome
How do you attach the mod to the end of shroud? custom adapter?
Hi there thank you for your comment. I believe you are referring to the moderator? Fx comes with a 1/2 unf thread from the factory. Donnyfl has a lot of different moderators that will thread on directly. Hopefully this helps.
Dear Shop! Can you tell me whether the FX impact air gun is made of aluminum alloy 6061 or 7075? Thanks shop!
😂contact the fx manufacturer I’m not Shop!
can you post a link to the other video you mentioned please.
Are you talking about one of my videos? I’ll do some checking but I don’t typically watch my own videos. Thanks for your comment
@PaulHamM3 I believe is the guys name just below your comment here. Check his channel out 😎
Do you have a simple way you use to index your barrel?
How I do it is. Simple or not. Shoot at 40 to 50 yards or however close you need to be in order to keep it on the target. Using the same aim point. Index until you find tdc top dead center or the highest poi point of impact firing 3-5shots. Once you find the high point. Then turn the barrel 90degrees down. You will find that to be the best accuracy. Once you do that retune your rifle. Throw out all preconceived notions….. this or that is the best speed for accuracy blah blah blah. Let what you see in front of you be your guide. I always shoot the new tune for three days running with out altering it in any way before I except it as a tune I will continue to use. However barrel stabilization is the key to being able to shoot at what ever speed you want. Thanks for your comment 😎
Does FX barrels have a crown?
Well maybe watch someone like Ernest Rowe for that answer. Technically yes but I think you might be talking about the choke. Both are present on fx liner’s. And not to worry about it. Unless you’re running a steel cleaning rod in THARR! Have a great day. Thanks for your comment 😎
That is a real nice fix for the shroud but the Ebay link isnt working anymore. Any advise on how to get the part?
I wrote a comment somewhere! lol. That the part will blow off so it has to be glued on. I contacted the seller and let him know about the issue so he may have stopped making them. If I were him I certainly would have. I do wish someone would take the time to make a better product. But I haven’t seen any. Sorry.! And thanks for your comment 😎
Hey, I have another question. If i install a 300 bar 700cc bottle on my M3 could i still do the delete or could i just raise my front reg to 250 bar?
Well it sounds like you’re asking two questions heading in different directions. Yes yes and yes! You can install the 700c 300 bar bottle with or without deleting the front reg. If! It hasn’t already gone bonkers on you? If you delete the front reg you are restricted to 250b fills. What everyone isn’t telling you is. Your already restricted to 250b fills with! It. If you’re trying to make a lot of power for shooting high grain slugs? You will have a lot easier time getting power with it causing a chugging effect between reg #1. There’s no plenum space between them just a micro bore hole through the receiver. This is what causes the degradation of power,,, rather or not the first reg is functioning or not. Ask away my friend 😎 I’m happy to help anyway I can Ha well as best I can. Thanks for your comments
@FxFanBoy I've already set the front reg at 250 bar, but when my bottle comes tomorrow, I want to be able to fill it to 300 bar. So can I fill it to 300 bar with my front reg at 250 bar?
@@dougiefresh3767 yes. As long as you have the 300bar valve installed on the bottle. It’s safe. I’m okay with being wrong so hopefully I’m wrong. Your front reg will malfunction after filling it to 300bar several times. This is why I don’t recommend it.
@@FxFanBoy Lol! I didn't say you were wrong. I'm asking because I have no clue. So it's best to just fill the gun to 250bar with a 700cc tank and still do the delete?
@@dougiefresh3767 it’s just my way of saying! I can’t prove it! But I’m probably right 😂 I have two m3’s. Both of them failed on a 280bar fill.
OK so you and I are on the same exact page in regards to what we are trying to accomplish. But, why did you seemingly cut your top shroud short? I have also have a CF tensioned shroud and I put a larger CF shroud over it.....but I wanted the end to be tucked under the top rail as far as possible, so that top piece is about 15" long.....in fact I am getting the MKII valve adjuster knob bc it is thinner so I can fit the top shroud even closer to the breech. It doesn't bother you seeing that 3d printed piece stick up past the top rail?
Ha very observant of you. I made a mistake while removing the rear uhm thingy. Ooof my brain is elsewhere today. Apologies. So I had to cut it shorter. I since fixed the length issue by using a 700mm shroud from a Maverick. Oh if we were in the same country I have several mk2 version dwell time adjustment knobs in my collection. Thank you for your comment
@@FxFanBoy I appreciate the offer lol I just put an ad on AGN for that knob. Or maybe FX has one? I love the look of the CF, but bc I have to order them from China/Ebay I am so nervous cutting them down to size. Nothing is ever easy. I want/need one size for when I use my muzzle brake and other size for when I use my moderator (bc the muzzle brake has a thread converter 1/2 20 to 5/8 24) so that takes up space. Always a pain in the butt =)
@@KevinWood44 I’ll check agn and see where you are located. Fx stocks them yes! But it takes eternity to order from them.
Black Arts needs to make the Impact barrel band to fit the 700cc bottle.
I agree and everyone else’s version I tried it not right either so I just use tape Shem lol. Thanks for your comment
Man you making very useful videos creative ideas waiting to receive my slug liner and tensioned system will be doing this as soon as I put my hands on them 👍
It’s Hella fun 😎 when you are smacking starlings at 185 yards! It’s pretty significant. That’s a kill zone of less than a half inch. Thanks for the comment.
Will this work with fx tensioner system
Yes sir thank you for your comment
Are you running the factory regs or the Huma regs? Also, you said no dual bottles because you are trying to get some extra power, does dual bottles not allow a power increase because of too much pressure or should i ask will it decrease your speed using dual 700cc bottles? I'm curious because I just ordered a 700cc bottle and was thinking buying another to run double.
Ok I’m glad you asked this because I can understand why you would misunderstand how I stated that. Go for it buddy it can not decrease your power. However when you/I’m taking the rifle apart and putting it back together several times a week trying things for power and accuracy increases. Removing the dual bottle set up just takes a lot of extra time to remove and replace. I am running the stock regs on AirPig my mk2. With some tweaks. My m3’s are Also running single amp regulators instead of the new version that are brass and Slow! I tried the huma regs and didn’t care for them PERSONALLY! Or imho. So run with the dual 700cc it works and looks awesome 😎 just a piece of advice. Re o’ring the bottle nipple and the tiny o’ring on the set screw behind the bottle nipple before you do the conversion. You will thank me later. Thanks for your comment. Have a great day
@@FxFanBoy Thank you! I got my first Fx M3 about 2 weeks ago from SPAW and have had nothing but issues since I received it. They set my front reg at 195 bar and it's been all over the place. The rear reg stays the same but the front one goes past 200 and down to 175 bar where the rear reg is set. It's been all over the place so I'm trying to figure out if I should delete the front reg or try to rebuild it?
@@dougiefresh3767 delete the front reg. Both of my m3’s are deleted. One failed right out of the box. The second one I deleted because it robs too much power it obnoxious Let me know if you need help with anything else thank you for your comment
How do you get the OEM plastic piece off the shroud? I tried to pry it out with no luck. Seems to be loctite. Thx!
It should be aluminum.? A heat gun or your wife’s hair dryer will work in a pinch. I’d say use a torch but most people will ruin the shroud doing that. Heat it till it gas’s off aka a poof of vapor coming from the shroud letting you know the lock tight has liquified. Then you can thread it loose. Thanks for your comment.
It’s a beauty 😍😍 and yes I subscribed 👍😉
That guy's 3D printing is way too shiny!!!! It just screams CHEAP
CARM makes a great single shot mag.
Yes they do. I have one. I think carm makes good quality products. I however am biased lol. If it doesn’t knock my socks off. I don’t make a video about. I purchase everything I review. And I reserve the to my opinion. Thanks for your comment buddy. 😎
Awesome I need to check hunter tactical I have a question did you have to index your barrel on your fx thanks for sharing bsafe buddy 👍
Absolutely did. All four of my current Impacts no matter what liner I run. Are! Indexed! I find TDC<top dead center. Then I turn it from tdc to 6pm. So tdc is 12 I find noon then set it to 6pm. Hopefully that makes sense. Yes they shoot great at 12. But 6pm is best. Thanks for your comment.
@@FxFanBoy awesome same here I did my fx impact mk 2 25 cal 700mm and my fx m3 800 mm I think you have to for long range shooting 150 to 200 yds thanks for the advice I appreciate
@@chrisfigueroa3361 yes sir. Your absolutely right it’s an absolute must!
Excellent, but its a shame its just in the US, do you know if these guys would ship to the UK?
Idk? Check the link I posted for eBay. Then message him. Nice gent. Always hits you back really quick. But there’s tone’s of 3D guy’s in the uk.
@@FxFanBoy yeah i will messege him, plenty of 3D printing chaps doing it here though but i cant seem to find anyone who has done this little piece.
@@PaulHamM3 thanks for your comment. Good luck buddy
I try this have not shot the gun yet waiting on some more parts but thanks for sharing 👍
Thanks for the comment. Let us know how it goes 😎
I wish I would have saw this before I started buying stuff..
Where did you find the shroud end caps that you screw on to add tension to shroud and barrel? I’ve looked everywhere and can’t seem to find them? Great vid!
eBay I posted a link in the description. Fyi you need to glue them in place. Or block the airflow with stacks of painters tape and screw it on after. I the 3D printed threads can’t handle 40-80fpe. They blow off. I need to post another video.
Sold out lucky me a found the same one on another listing but was the last one
@@airguns-shooter hey share the listing with the family. Make sure you glue it in place properly. Thanks for your comment 😎
That’s interesting! Hey let me know what if anything changes after? I always go overboard with all my projects lol. Thanks for your comment 😎 in my minds eye, the problem I was trying to solve was the water hose kinking between your two hands when applying pressure inverse. I’m just shooting the same rifle right now for the first time after taking it apart for the video. It’s dead on -2 for 4mph wind. That’s pretty good in my book. Hey long winded me! Thanks for your comment.
I did not tension my 800mm barrel with that many sections of painters tape. I did 1 in the middle, 1 on each end and then split the difference. I see where it could cause a wave effect on the barrel. I might just pull it tonight and add 4 more sections of tape. It can't hurt that's for sure!!
Did improve your accuracy overall? I do not see any results comparinson anywhere, maybe you could share your results?
Yes it’s like night and day. I could definitely buy a new liner and show you that. But I don’t edit videos so it would be an extremely long! Video because the only way to honestly show results would be using the same rifle right? Thanks for your comment 😎
how much your airgun?
Thanks for your comment. I I’m not selling or in business to sell them. Thanks
@@FxFanBoy ahmm wellcome
👏👏👏👏👏
How much fpe Ure getting...are u using the heavy hammer
Hi thanks for your comment. I believe I was using nsa 31.2g slugs in this video. Roughly 82fpe. I’m using a tungsten hammer weight. I posted a link for eBay. But recently a barrel change has raised the bar to 35g slugs breaking the sound barrier!! Stay tuned haha
Good my freend 🤲🤲
good idea ... "mouse fart" vs "man fart"
Great, greetings from Viet Nam
Awesome!!!!! And I Love your Cocking handle Bruh!!!!!!!!!!!!!😃
Would you mind telling me what vertical grip you are using? thx
Ergo I use them on all four of my impacts. I have large hands the stock grips do not fill the palm. Not expensive imho and I’ve yet to see any wear. TMI? Ha have a great night 😎
@@FxFanBoy Perfect- thank you!
I shoot the same 31.2 niesen slugs and they are accurate but with 165 bar reg power I am shooting them not more than 975 maximum . How did you acieve that kind of speed ?
Higher reg pressure. Hummer spring. Tungsten hammer. And too many other details to mention. Porting polishing. But I’m not sure what video you’re referring to. Or which mk. I have four. Thanks hopefully this helps.
Glad I don't have to mess around all the time with my AGT Vulcan to try improve it..😉
Man the Vulcan 3 in 30 cal is on my list!
nice!
WOW! Thank you for the info, I have a tensioner on order so i am going to do this !
Awesome. 😎 thanks for the comment. Keep us posted!!
Fantastic shooting. I’ve only had about 30 minutes to play with the tune and haven’t found it yet. I’m looking for 1010 fps and the dial it back as needed. Pellets were stacking on top of each other at 50 yards at 865 fps but it wasn’t enough speed for my slugs. What does your tune look like? Thanks
I’ll have to address that subject in some kind of video maybe in the future? I have more information I want to share. But as you know I don’t edit videos lmao 🤣 my tune on .30cal. That’s not a straight forward answer. 14g tungsten hammer. 170bar final reg. Delete first reg. And the list goes on. Thanks for your comment.
@@FxFanBoy I hear you on the editing thing. I have lots of video on iguana hunting but I don’t have the skills (or time) to edit. Good stuff on your end
𝕡𝐫o𝕄o𝔰𝓶 😻
Dang… just got my .30 cal, haven’t even shot it yet. Sure hope mine shoots well. Thanks for putting the time in and posting it for us. 👍
I hope it does also. It’ll probably shoot pellets fine, but I haven’t talked with one person that has had luck with slugs with out putting in the time and $ have a great day.
Airgun fx impact the best
Until they start leaking...have had 2....25/.30 cal...leaks and rebuild after rebuild 🙄....thank god for my AGT Vulcan 😉
what is the number of shots it fires with this cylinder? and what is the speed of the projectile leaving the muzzle?
In this video there are two or three rifles depicted. I’m not sure what one you are speaking. Thanks
I have been thinking of cutting a piece to put behind the stock shroud before the body of the impact.
I tried that. I still have the piece LoL. Imho it actually caused increased muzzle flip or poi shift. Especially when using heavy slug’s. That’s why I did this to all four of my impact’s. Sorry for the late reply. Have a great day.
What size do I order?
14mm check your od. It should be 13.95’ish. The 3k thickness is what you want. If you don’t own a set of calipers let me know I’ll get you exact specs.
20x14x500 is exactly what I ordered. Enjoy your night
@@FxFanBoy thanks mate, this is for the barrel but you have size pls for the other one ?
@@tld-airgunsalafrancaise5965 I believe you are talking about the length? 500mm length. If this isn’t correct please text back. I don’t know what video you replied from? Thanks buddy
@@FxFanBoy thx fxfanboy, I'm talking about this video. Yes the 500mm carbon tube. The big one that comes through the 14x20x500 is the stock one or made by yourself please?