2000 Yamaha R6 Diaphragm replacement, carb cleaning and install the carbs PT.2

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 9

  • @JuanOrtiz-mo8be
    @JuanOrtiz-mo8be Год назад +1

    so did you get it fix ?
    and how?

    • @yamacrazy
      @yamacrazy  Год назад

      I have not got it fixed yet. I’m pretty positive it’s the fuel pump. I’ll be working on it again in the spring! I’ll start wrenching on it again in about a month!

    • @JuanOrtiz-mo8be
      @JuanOrtiz-mo8be Год назад

      @@yamacrazy try to do the valve adjustment, that’s what fix my problem and also I had a vacuum line missing .
      Now it rips at 100mph .
      Hope you get your fix soon good luck !

    • @yamacrazy
      @yamacrazy  Год назад +2

      I was told to look into a vacuum leak, I did look a bit but I couldn’t find anything. I’m definitely going to look again, but I’m not sure why a vacuum leak would cause the bike to stall completely and not want to start again after about 20 minutes of sitting. I’m going to look into adjusting the valves for sure. I’ll have an updated post about the bike once spring rolls around! Stay tuned!

    • @jonathanspencer8305
      @jonathanspencer8305 3 месяца назад +1

      ​@yamacrazy my boots that hold the carb to the head leaked on me. I'm hoping this money pit runs before it kills me. Also a heads up about 3mm is a good set for the floats

    • @JuanOrtiz-mo8be
      @JuanOrtiz-mo8be 3 месяца назад

      @@jonathanspencer8305 got mine fixed. It was a vacuum hose that ran from the top of the airbox that was missing. I was able to ride it at 100 mph after that and then sold it.