Awesome job! This has to be hands down one of the best voice evac setups I’ve seen for demonstration purposes! I’m sure it took a lot of time and money, but I’m sure it was worth it! If I can find a 4003 panel I’m looking at doing this with my system someday. But I’ll stick with horns for now.
There may be a break between the data lines that is just enough to allow the panel to see the annunciator, but is enough to cause a trouble, try re-wiring the annunciator and make sure no wires are touching each other
A way you could check to see if it's a panel issue is wire the LCD 80 to the Unimode 10UD and see if the same thing happens. If it works properly, then the panel may have a loose Ann terminal. If not, the annunciator may have a standby communication issue. (also try the ANN 80 on the UDLS). By the way, I got a 9200UDLS nib today
There'll be compatibility issues along the way, chances are, as I have previously stated, the issue may be within the data lines, it'd be best to check the wiring first, to perhaps see if there's a break between the two devices, or any other wiring issue
My local walmart has this. They have it interconnected with their voip phone system for paging. When the store was opened. You would hear a page tone before a message but they have since turned the page tone off
I installed the First Addressable Fire Alarm System in the State of Wyoming... back in day... is you (steel) backbox touching the back of your remote station ?
Can you make a video on how to wire the annunciator that you have on the board in this video? I am planning on getting the same panel and annunciator. Thanks in advance
My school is an MS9600UDLS system with SpectrAlert Advances on HIGH VOLUME! WHY!? Also BG-12LX pull stations CORRECTION: it might be an MS-9200UDLS, since the 9600UDLS is quite rare.
well, Fire Alarm systems can call you but you won’t be able to understand it. It talks with touch tones that only an Alarm company receiver can understand.
Hay I know why the alarm goes off the alarm system that you have can hook up to what call auto alarm call witch call emergency services and because you don’t have that hook up to the system is is think a rat or somthing has eaten the cable and it is sending a error alarm to get around the problem you need to switch the switch that have the emergency call system and turn that off hope that fixes the problem
6:50 same thing with my pull station and my fire alarm I followed everything and nothin I would connect it with the battery and it went of and the pull station was not pulled also good video
RSS Alarms that’s because the 4003ec is a Safepath made to Simplex’s specifications and it has Simplex tones and messages on it. It replaced the original 4003.
Awesome job! This has to be hands down one of the best voice evac setups I’ve seen for demonstration purposes! I’m sure it took a lot of time and money, but I’m sure it was worth it! If I can find a 4003 panel I’m looking at doing this with my system someday. But I’ll stick with horns for now.
Awesome system! It looks really professional!
Do you own any voice evac alarms?
When you did the weather alert message the tone at the beginning made my ears ring through my headphones lol
THIS IS MY FAVORITE VIDEO!!!! WATCHED YOU SINCE DAY ONE!!
COOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
There may be a break between the data lines that is just enough to allow the panel to see the annunciator, but is enough to cause a trouble, try re-wiring the annunciator and make sure no wires are touching each other
i love that speaker strobe.
me too
The part I love to have to go through this is so awesome
Awesome job! Can’t wait for system test 1!
Some Safepath panels have the Telephone paging or Background music options, there are Safepath Speakers or Strobe boosters if it's a large system
12:04 The correct model number is D355PL.
Awesome job, grant!
Thanks! :)
You have to enable the remote microphone on the main Safepath panel for it to work, if it still doesn't work. You have to replace the Remote mic
Awesome!!! Can’t wait and I feel really glad for you with the new safepath!!!
A way you could check to see if it's a panel issue is wire the LCD 80 to the Unimode 10UD and see if the same thing happens. If it works properly, then the panel may have a loose Ann terminal. If not, the annunciator may have a standby communication issue. (also try the ANN 80 on the UDLS). By the way, I got a 9200UDLS nib today
The two are incompatible
Bob Tramontana he can test the ANN 80 on the UDLS though to test the panel for issues
There'll be compatibility issues along the way, chances are, as I have previously stated, the issue may be within the data lines, it'd be best to check the wiring first, to perhaps see if there's a break between the two devices, or any other wiring issue
How did you get a NIB MS-9200UDLS?!?!
The weelock panel is really cool
I love all the blinky lights 😍😝👌and you should name the panel “GET OUT!”
that tuble sometimes means that their is something wrong with coronal panel or anuancator
6:50 I was at a Walmart and saw one of these today while on vatcation
He did it boys
Awesome vid! Can’t wait!
Very cool! Can't wait for the second vid!
Congrats man I subscribed
@@agoushy74 You just gave away were you live i could find you but i wont because i aint that kind of persone.
@@parker02311 what did he say???
Great video 😀👍👍
Can’t wait!
My local walmart has this. They have it interconnected with their voip phone system for paging. When the store was opened. You would hear a page tone before a message but they have since turned the page tone off
Damn if his house ever catches fire this guy will be woken up so fast lel
Get a BG8 for that backbox.
I installed the First Addressable Fire Alarm System in the State of Wyoming... back in day... is you (steel) backbox touching the back of your remote station ?
Hello, if I want to wire a System Sensor 5601P to a ES-200X (which is their newer addressable FACPs), should I use a MMF-300 or a MMF-302?
Where in the world do you get these?
How many panels do you have? It looks like you have a lot
5:12 may I get your attention PLEEZE it get me shocked
Can you make a video on how to wire the annunciator that you have on the board in this video? I am planning on getting the same panel and annunciator. Thanks in advance
Amazing system!
My school is still using old wheelock voice evacs! Half the school still has annoying Edward gong bells.
The UK version would be A GENT by Honeywell panel.
I think the panel doesn’t see the annunciator
Is that basically the safepath 4? Or is it a newer or older version?
Can you do that on record button on the channel
That’s awesome!
Name the panel name as “Evac System”
Where did you learn all of this???
The firelite lcd80f annunciator problem could be that you didn't program it to the panel or the annunciator is bad.
What is the trouble like that I can see it panon
My school is an MS9600UDLS system with SpectrAlert Advances on HIGH VOLUME! WHY!? Also BG-12LX pull stations
CORRECTION: it might be an MS-9200UDLS, since the 9600UDLS is quite rare.
Me: Fire drill!
SP ADV: Bye Bye hearing, (Beep Beep Beep)
Me, Ouch, My ears!
My school has a simplex 4100es panel with truealerts and simplex t bars with the LED and the panel door is gray
my school has a 4006 4005 4007 4008 4010 or 4001 with true alert horns and speaker strobs and dual action simplex T-Bars.
I’m pretty sure the ANN-80 Is A Conventinal Annunciator
But you can still wire it into the panel and it’ll be addressable
What about the annunsiator on the ms5 system?
OMG i love it😂
What is the purpose of the junction box
Could you do a video showing how the dialer system works? I can't seem to find a video detailing this. Could you say make it call yourself?
well, Fire Alarm systems can call you but you won’t be able to understand it. It talks with touch tones that only an Alarm company receiver can understand.
Do the first ever alarm
I said fire alarm in test the fire long legs yesterday and they test it like today and yesterday I detest the smoke detector
Check the wires to see if their all together and messege me back
Nice
Good
5:13 What did the speaker say?
may i have your attention please, the national whether service has issued a severe whether warning for our area!
as a hobbiest, do you take any classes on this kind of stuff, or are you mainly self taught?
Hay I know why the alarm goes off the alarm system that you have can hook up to what call auto alarm call witch call emergency services and because you don’t have that hook up to the system is is think a rat or somthing has eaten the cable and it is sending a error alarm to get around the problem you need to switch the switch that have the emergency call system and turn that off hope that fixes the problem
i seen that system in a walmart
Smash it
See It Being Tested In A Video Titled Wheelock & Fire-Lite Voice Evac System Test 1
ayy on my cousons bday
you did'nt even activate one!! D:
smash it
The new year
Clemente
4:03 does anyone know what that blank space in the middle is for?
Stickers to tell you which button does what.
The Alarming Alarmist Yea, now I know you can put labels there xD
You take the cover off and you can write the messages
6:50 same thing with my pull station and my fire alarm I followed everything and nothin I would connect it with the battery and it went of and the pull station was not pulled also good video
Just reset system
That Wheelock voice evac panel looks very similar to the simplex 4003ec
RSS Alarms that’s because the 4003ec is a Safepath made to Simplex’s specifications and it has Simplex tones and messages on it. It replaced the original 4003.
You can fix the annunciator problem by smashing it completely. It's about the only way to fix firelite products
the e50 is basically a speaker strobed as
O…rrrrrrrr
That's awesome!