Placing 0201 metric
HTML-код
- Опубликовано: 11 сен 2024
- With the smart solutions from technology leader ASM, placing super-small metric 0201 components is no problem - even in high-volume applications. Prepare your production for the challenges posed by the continuing advances in miniaturization - the DEK and SIPLACE teams are there to help.
Nice pieces of kit. I work with ASM lines regularly.
Cool! I pass the ASM building almost every day here in Phoenix!
Any suggestions for 201 parts flying during production.
No errors
@@sanjayramjeea2510make sure your feeders are indexing correctly, sometimes the part packaging pop parts, and check nozzles something. Or your part profile is wrong or wrong part loaded. make sure your feeder table is not loose.
Πολύ καλή παρουσίαση. Σε λίγο καιρό θα δουλέψουμε πάνω σε αυτά τα μεγέθη.
incredible....
Whatever happened to 008004?
Am having issues with 201 placement only.
Parts flying everywhere for only 201 placement.
The rest 402 or 603 are fine.
What could be the cause.
Asm x series...
Vacuum is good, cal is ok.
New nozzles and also just change the linear bearing
906 nozzels for the 201 parts? hopefully your solder paste is not dry. and board supports
Hello Sanjay
You can discuss process issues with our experts at your closest Center of Competence here smt.asmpt.com/en/contact/smt-center-of-competence/ or contact your local support team here smt.asmpt.com/en/contact/service-hotline/ to discuss your specific production issues. We are here to help.
Какие маленькие....