I have a build coming up which i think a basic interior will be cool to do :) Biggest issue i have is time management, as interiors take a loong time :P but ill do one next week i promise!
Casual petition to get Frank Stephenson the car designer guy to react to and rate Automation cars 👍 get out there bois I'd love to see him play this too
One of the best videos on The channel. Love when u test ur builds on the dragstrip (start doing it even with normal cars, as a standard test. It would be nice comparing)
Thanks for the nice words bud i appreciate it :) I think a few "offical" tests could be a good thing maybe have like a chart or smth to show all my times!
13:20 the end of that race sounded so good, your engine sounds like combined 🤤 Sounded like a combination of your v8 and his supercharger made it sound like you had a gearbox whine and well supercharger
Rye please stop shifting auto transmissions. The Moonhawk cannot be shifted manually. The "1" and "2" are used as engine brakes to slow down the car while going downhill and to not wear out the drum brakes.
i don't know much about cars but, i'd personally recommend putting better brakes in the front than the rear as when you brake the weight shifts more to the front and only single piston brakes wont stop that well going 180mph
The most popular transmission used in drag cars over 1500 horsepower is the 2 speed power glide because of its strength and it lessens your chance of missing a shift and it keeps you in the power band longer.. All the rules change when you have that much power you don't need all those gears nor do you want them.
it would be fun if automation had a collab with forza, and they would make the best car simulator. where you make your own car and race with friends. or just forza having better tuning platform
the technicality of making the games work together would be insane, would probably be better if forza team picked up automation team and they worked on a brand new game
My preference is supercharger because of a flatter torque curve and a little extra power down low (irl turbos have gotten so good that this may not be the case anymore (
I LOVE drag racing and building drag cars in Automation. My personal best is a 6.3 second pass and that's with a FR layout as well. What's the quickest 1/4 mile pass you've made/seen with an Automation car?
I made a 2000 hp engine in automation in 2 days and shoved it into a racecar it does 1/4 in 7-8 seconds with good launch 7.2 seconds and u need to manually shift at 8000 or 9000 rpms I forgot the rpms limit
Can you make videos playing around with the new update when it comes out cause I cant play and I really wanna see all the stupid stuff that we can now do in the update
As Myles said yes you can test in automation but it is only a simulation based on specs of your car. I can do it in a build next week but its mostly just for show :P
Yes. You'll probably get a different answer from this community specifically because 90% of them use Automation for Beam, but Automation on it's own can be fun for the sandbox alone, and the campaign exists.
If you like designing cars or want to learn more about cars in general. Automation is a great place to do it! the campaign mode is pretty good too. I actually owned automation for a while before you could play with beam and i enjoyed it :)
Which car is cooler?
Like For Automation Car
Comment For BeamNG Car
Litteraly the first comment other than TwinTurBros, so.. Is it off topic to say.. Early?
Is it illegal to comment and say I preferred the Automation car more
Demon, 1 hood scoop
Hellcat, 2 hood scoops
The moon hawk IMO
If only Automation worked better with fully race tuned engines, but alas, it is a game for production cars.
You should start making cars with interiors now that it's possible.
Id give him a break since it’s very time intensive to just do the outside
@@gusper8116 yeah lol interiors are cool but it takes so long to fine tune the placement
@@grantmills4184 7 hours ain't that bad
I have a build coming up which i think a basic interior will be cool to do :)
Biggest issue i have is time management, as interiors take a loong time :P
but ill do one next week i promise!
@@TwinTurBros Don't drain yourself, just focus on the exterior
"maybe BAR stands for bad ass racecar"
smoooooth
could you do a tutorial on designing cars, like how to work with those fixtures you usually do the grille and modern headlights and such?
Possibly I can do a quick tutorial. although i am surely not an expert :P
@@TwinTurBros your front end designs are very respectable. The rear end on this vid was not it though hah
Casual petition to get Frank Stephenson the car designer guy to react to and rate Automation cars 👍 get out there bois
I'd love to see him play this too
I may or may not have emailed him in the past XD
sadly no reply, he is a busy guy eh!
id lovvvve to get him to do some automation (or a collab :P)
One of the best videos on The channel. Love when u test ur builds on the dragstrip (start doing it even with normal cars, as a standard test. It would be nice comparing)
Thanks for the nice words bud i appreciate it :)
I think a few "offical" tests could be a good thing
maybe have like a chart or smth to show all my times!
@@TwinTurBros yeah buddy!
Can you make a drag car with a max size v16 but the exhaust has to be the minimal size
I’ve made a 6.1sec RWD in-line 6 car
13:20 the end of that race sounded so good, your engine sounds like combined 🤤
Sounded like a combination of your v8 and his supercharger made it sound like you had a gearbox whine and well supercharger
TTB the type of guy to race tune a race tuned suspension
Rye please stop shifting auto transmissions. The Moonhawk cannot be shifted manually. The "1" and "2" are used as engine brakes to slow down the car while going downhill and to not wear out the drum brakes.
BuT its more funnnnnnnnnn
~~also tested and could go faster with it in manual shifts
Now I’m curious as to how cheap a car in Automation can do a sub 10 second quarter mile in Beam
The BAR DragPack DP for short
It did a sick burnout.
i don't know much about cars but, i'd personally recommend putting better brakes in the front than the rear as when you brake the weight shifts more to the front and only single piston brakes wont stop that well going 180mph
You should build a 90s freedom car.
This is basically just who has the fatest rear tyres and the most power
The most popular transmission used in drag cars over 1500 horsepower is the 2 speed power glide because of its strength and it lessens your chance of missing a shift and it keeps you in the power band longer.. All the rules change when you have that much power you don't need all those gears nor do you want them.
Build a Funny car dragster version of that car.
it would be fun if automation had a collab with forza, and they would make the best car simulator.
where you make your own car and race with friends. or just forza having better tuning platform
the technicality of making the games work together would be insane, would probably be better if forza team picked up automation team and they worked on a brand new game
still waiting for an AZ1, time to say this vid, video numero 2
Turbo update brings quad V10s, time to revisit and old car I made. 6L V10
LCV 4.2 is also adding 110 octane fuel too. But it’s not compatible with the campaign I think.
@@AJS_Drums I was planning on sandbox build, 110 would help get to 1600hp tho.
I mostly just want less lag
@ j Walster is the engine you’re building NA or turbocharged? I think you can get 1600 out of 3.5 to 4.0 liters of displacement if it’s turbocharged.
@@AJS_Drums A Twin turbo 6L V10 can easily get (a very laggy) 1600Hp
My preference is supercharger because of a flatter torque curve and a little extra power down low (irl turbos have gotten so good that this may not be the case anymore (
New slogan we don’t set the bar we are the bar
Couldve called it the Dragon. Like how the Demon is the Demon...
I believe you named it after the Browning Automatic Rifle from WW2
I'm assuming both of these games are for pc only
I'm watching this as I'm making a V12 race car
V12 is best engine change my mind
@@TwinTurBros Well I can't it is a great engine also super cool car better than I could make.
@@TwinTurBros V6 sounds better
@@Lol-pb9bx -Mickey
-He couldn't afford the SS package
@@TwinTurBros I personally can't go against a good old hemi v8
BAR acually was a formula 1 team around the late 1990s the full name of the team was British American Racing, so thats where the BAR stands for
9:04 you mean the redeye? Or the original demon from back in the day??
Pretty sure he doesn't know about the old one
@@dr.brainzdead I'm thinking the same lol
@@THESLlCK to be fair I think most people don't know that one
Unpopular era and so on
I was meaning the old one the Demon (its not even that old XD)
its basically a new version of the demon, but with mucch more power :P
Can you do this again with a track car maby?
Its on my todo list :D
@@TwinTurBros ok
How do I get the mod installed?
You download it, then just copy and paste it into your beamng mod folder (mine is in my computers documents folder > BeamNG.drive > mods)
@@TwinTurBros thanks.
You can go in the jbeam. File and u can make the turbo come in at lower rpms
Decent content. But I’m really wondering if you have ever built a racecar or even an engine, based on the decisions you make. Entertaining though
Never built a race car or an engine irl. But I do own a classic car which I've worked on alot :P
But yes this is just for fun :)
Cheers!
4:24 an American car and huge understeer now this game is realistic
Ar12 be like: *uncontrollable toyota yaris with 1300 hp*
I'd switch it to MPH and cubic inches to get accurate measures. But good stuff all the same.
I made a truck that does a drag in 7.7(best ive done so far) at about 200mph.
Edit: Forgot to mention that this is without mods.
We need the turbo update
I LOVE drag racing and building drag cars in Automation. My personal best is a 6.3 second pass and that's with a FR layout as well. What's the quickest 1/4 mile pass you've made/seen with an Automation car?
drag racing is alot of fun. I actually hit a 5.1 today but that was cheating just a bit XD
fastest true time is 6.5! so 6.3 is very good bud
@@TwinTurBros holy crap! even with mods idk how you'd get a 5.1!
You can cheese the start time so the timer doesn't start immediately xD
@@TwinTurBros LOOOOOL so that's why you said cheating instead of modding
Yeah with this "cheat" you can probably get like 4 seconds or less :P I don't count it as an official time myself xD
In a literal sense, bar means browning automatic rifle
Me in 2021 knowing theres a challenger dragpak ....
Looks like an AMX body
Automation car
Make a oilcrisis car.
- 5 door wagon
- ugly
75-
- Slow
6.0 v8 with 120hp
@@dono2926 nah 1hp
I made a 2000 hp engine in automation in 2 days and shoved it into a racecar it does 1/4 in 7-8 seconds with good launch 7.2 seconds and u need to manually shift at 8000 or 9000 rpms I forgot the rpms limit
That looks mean!
I licked my own eyebrows today
same.
@@TwinTurBros took a little cutting but it was worth it
@@TwinTurBros Oh BTW you called a 7.9L big, well I have news for you:
ruclips.net/video/_3JT8PR8AEo/видео.html
I just played and messed around with car designing and i ended up building a 7 sec car
Try do it again with more horsepower and less weight
Can you make videos playing around with the new update when it comes out cause I cant play and I really wanna see all the stupid stuff that we can now do in the update
Can you test your car in automation itself, instead uploading to beam.ng? Cuz its look like automation have its own ciecuit outside the building
As Myles said yes you can test in automation but it is only a simulation based on specs of your car. I can do it in a build next week but its mostly just for show :P
I made a 4400hp engine with that same setup
nice
So you uped the power of a dodge and uped the boaty-ness of a dodge
Basically a dodge except worse at turning :P
Can someone tell me how he edits the clones panels?
Hold either Shift, Alt or control and drag on a fixture (i cant recall which button it is as its 2am and i am very tied :P)
Can you play more gear city?
I will be doing more in the future :D
Why your view is so little?
Does anyone think this game would be fun without beamng because I don't have an Xbox controller and I wouldn't go out and buy one just for beamng
Yes. You'll probably get a different answer from this community specifically because 90% of them use Automation for Beam, but Automation on it's own can be fun for the sandbox alone, and the campaign exists.
If you like designing cars or want to learn more about cars in general. Automation is a great place to do it!
the campaign mode is pretty good too. I actually owned automation for a while before you could play with beam and i enjoyed it :)
👁
Loaded 1236 unloaded 650
UGH. you messed up the ride height and the fitment.
ah yes when its a drag car
what about the fitment.. it doesnt need to be that wide man a part of the fender is in the tire and it infurates me so much
Eh i thought it looked good :P
I love me a clean fit.
rideheight was borked tho. but that was for just beamng racin!
Last
Last
First
Mmm. Nope
Nope plus nobody cares
Who cares?
Ok calm down jeez
the bot is really bad so u should go against someone else
oooo an idea for a future video :P
Slow lmao
"or 100 is that race fuel?" nah dog go with E85😎