You guys are really helping people out. Unlike other garages who give you empty promises and dont fix anything. Just taking your money. I'm glad that there are people willing to take the time, inspect and find the exact problem and then fix it step by step. God bless you guys! You are a real hope for the people who lack the knowledge in fixing cars. I wish that there were more of you, but sadly there isnt much.
A real gem,Fantastic service,Great value and a family owned business who take great pride in their work.l would highly recommend them,especially if you got Mercedes, I visited the workshop they diagnosed my Mercedes about the knocking sound ,they gave me the part numbers they told me to buy it and we will fit them in and we have managed to fix it today,I’m super happy. I would recommend these guys hundred percent. They are trustworthy unlike other garages. Thank you very much, you are saving so many people time and money.
I'm an MB tech, we've done dozens of these on the early 654 models, the rollers are modified and it's not an issue on the later ones. The biggest issue at the minute with these engines is the tandem vac/oil pump leaking oil into the vacuum system and eventually the brake servo
The guys at Enka Motors fixed my Mercedes camshafts, rocker arms and tappetts yesterday, I highly recommend this garage, very friendly and knowledgeable, good price also. Take a book it’s not a 2 minute job!
@@MickSweeney-qe3od thanks for the message. I just saw it. Had the notification off. It was for a friends car. The noise seems to have gone away for some reason. Sure it’ll be back. I’ll forward your advice to him. Thanks again.
Hi Enka Motors,would like to praise you guys for the Good work you carry out for the mercedes owners. As a Tech myself,familiar with these Engines would recommend to clean out the carbon build up in the Inlet manifold & both EGR Coolers too. This will improve Engine Running Efficiently aswell. God bless & keep up Good work 👏 .
Thank you very much for your advice my friend, we will definitely take this into account for future jobs. For example, we’re currently repairing a snapped timing chain, but we’ll make sure to clean the inlet manifolds and EGR coolers as you said. 👍
My friends 654 had this issue.. and I’ve got the same engine with 143k and so far I haven’t had that noise but it worries me so much.. thanks for the detailed explanation..
1:53 exact sound of my e200t m654.916 engine....so presumably it is the same child disease as seen in Enka motors garage for 25 times :)))). Globalization killed Stuttgart three point star! So today MB car paid 54k Euros with 340k Autobahn kilometers driven since 10/2019 has this kind of problem?! You may say I'm stupid, but it wasn't like that in last century. Cars used to work for much longer intervals without serious interventions like my E klass needs! Much respect for your videos&work! Long live & stay well !
I work at MB and I've done them under warranty in cars with 30-60km of mileage, which is 18-40k miles ;) Once u hear It once, it is easier for you to hear them failing in the early stage.
@@Cribs00 Thanks on honest answer ;-) Actually, I purchased c180d two months ago. It was 3 years old and had 25.000 km. On monday I was in MB's workshop on recall action due to some valve in cooling system and SW update for engine ecu. MB figured out that the regulation of cooling can cause water pump membrane failure. Subjective observatio after sw update: more vibrations in idle mode? Another thing is, whether to continue to do services at MB workshop or do it by myself. Changing oil and filters is not so difficult and I have my own garage with 2m deep oppening in floor. Can you share with us, who is om supplier for mercedes parts? I saw beside mercedes number also model number and logo of supplier. E.g. air filter for om 654 is usually from MAHLE, as well as oil filter. Diesel filter is from MANN HUMMEL, right? The question is, does it make sense to by om mercedes or aftermarkt? Air OM filter is around 70€ and aftermarkt 30€.
@@ludimilojko8607 Change your rocker arms if you want to drive this car for long time. If you do it early, you won't damage camshafts which are very expensive to replace. Just buy them made by INA. Do oil change yourself. A lot of mechanics in my dealership did not change oil in customers car. Change oil every 10k-15kkm. Its very simple. You wiill have to open secret ASSYST menu to measure exact amount of oil in your engine. Also you will have to buy one time use plastic oil drain screw. I am not sure of supplier of MB parts. Daimler tries to hide it. For filters use Mann, Mahle, Knecht, Kengst. Don't buy original filters from MB. They are rip off. Overall, do simple service by yourself and only go to dealership for bigger repairs.
@@ludimilojko8607 And one last thing. CHANGE YOUR WATER PUMP! There is an issue in this engine where it breaks and coolant is being sucked up into vacuum system. If that happens, repair is very expensive. Engine, transmission, timing chain will have to be taken out and oil/vacuum pump will have to be changed and a lot of other parts Read about it in internet.
good job, a little tip, check the silencer rubber on the gear wheel of the high pressure pump, I have had 3 cases so far, the rubber had come loose.2 pieces OM 656 and one OM 654.
Does it still happen on newer sprinters with the 654 engine ? 2022-2023 model. We a few at work with the 651 and 654 engine. The one i'm driving has almost 15.000km on it, oil consumption goes down as we drive more ( engine break-in period ). Had to add about 1L after 4000km. Consumption is way less now
And what about the missing rollers from the bearing? Leaving them inside for the oil pump to eat? And than get the engine damaged? Some of the rollers from the rocker arms bearings can even get into the timing chain and can causs serious damage there.
Hi, i think im having the same issue with my vehicle i was wondering if you could let me know of a rough estimate on how much the parts will cost? Also the price for labour if possible thanks a lot :)
Possibly could be prolonged to a certain extent, the reason these rocker arms fail is because factory arms on the engine they don't seem high quality whereas the replacement ones are branded and seem better quality. Another reason, for them failing is the excessive pressure on the exhaust side dpf, cat convertor and two egrs etc.
Very good I have a same mercedes with same issue knoking noise during start engine for the first time in the morning time. The knoking noises are for few seconds only What do you think is the issue and which parts are worn out. Thanks in advance Regards. Paul
From your description, it seems that the issue would be the timing chain rather than the rocker arms. Timing chain issues will usually only make a noise when you first start the car whereas a rocker arm issue would be heard every time. Rocker arm issues will also have a knocking noise to them whereas timing chain issues will have a grinding/shuddering noise which will last a few seconds and get quieter. We have a few videos that show timing chain issues, you can browse them to compare the noise between your car and the one in the videos. I hope that was helpful
Thank a lot for your feedback. O have a video but unfortunatly I can't upload it in comment section,can I have your email address or WhatsApp number to send you the video. Thank you very much
The old rocker arms that comes off the engine they don’t have part number, barcode or brand on it. The new ones are INA brand and have barcode and are the upgraded better quality ones.
Yes I would still recommend a 2017 e class, the 645 engine has only this rocker arm problem, which usually arises after the car has reached 100,000 miles or 150,000 km. The rest of the car is good 😊
@@enkamotors7012 i dont know,I hear similar noise at cold starts and goes away in 4-5 second but i will check out your timing chain videos thanks for your answer
Your one is timing chain because I had same problem but mine was camshaft and timing chain Mercedes start to changing the timing chain for free because dvla told them so it’s recall
@@Sozzi924 no it doesn’t matter I’ve got the letter and Mercedes doing it free because dvla told them to do it so they have to do it just book your car they will do it
im going to do same job on mine . what do i need for parts ? 4 copperwasher for injectors and all the rocker arms and lifters. and headvalv gasket is it any more ? 😁
16x rocker arms 16x hydraulic lifters 4 copper injector washer Rocker cover gaskets comes 3 piece 2 gaskets under the camshaft carrier Engine oil and oil filter And get camshafts just in case they excessively worn if not you can return it without opening box
Hi Enka, thanks for the video. You did explain it amazingly! How would you rate the engine that is in c200d 2015, one with the 136hp i heard it's Renault R9M engine. I recently traded in for the s205 and i little worried about reliability.
Hi, same issue been told by Mercedes Brighton, on a E class w213 220 with just 60.000 miles and all the services done with them. Can I have your number to discuss if you can help fix this. Regards Danny
Are there same issues present at om654.916 engines built in face lifted c class c180/200d? It is 1.6L 122hp or 160hp and supose it is the same engine with different ecu maps.
Emissions regulations have definitely killed the diesel engine. No matter how good a diesel you put in it, with 2 egr's and a massive DPF - there's no way the engine will last. It's a shame because all this does is cause more pollution in the end, also making people poorer by having them spend thousands for new parts and new cars. Much better were the times when you could buy a Mercedes and you were guaranteed for 20 years of usage - 300k miles!
I have the same noise in my engine, and i have an additional problem of not having the ability of using the car pallets, and what i notice in parallel is that my car can't go further than D7, so it doens"t reach D9 anymore.
This noise indicates a problem with the camshaft or rocker arms, causing your engine to go into safety mode and your car to slow down so you can’t reach D9 anymore.
Is there any way I can send you a video of my vehicle? Been into the dealer twice now and both times they say it’s normal 🤷🏻♂️ doesn’t sound right to me! Aa recovered the car in too as they think it doesn’t sound right either?
@@kishanraja9139 my friend I watched the video and that noise does not sound like the rocker arms, either something wrong with the timing chain or engine internally
@@enkamotors7012ustam, bildiğimiz üzere. Zincir, bakımlar aksatılmadığı sürece 200bin kilometrelere kadar, hatta daha fazla dayanabilen bir bileşen. Om654 de16 da bunun erkenden ses yapmasına veya arızalanmasına neden olan bir durumdan bahsediyoruz sanırım? Tam olarak bizi bu motorda bekleyen sürprizin sebebi nedir değerli üstadım?
I drove the car with this noise to get it home it was an hour journey the car just suddenly cut off on m40 and won't start anymore is this the same issue?
I don’t think it’s the same issue, a knocking noise coming from the engine wouldn’t lead to a car shutting off, but it could be that there was an issue with the timing chain of the car: either it snapped or jumped
@@adz3133 if the timing chain is snapped then the engine wont tick over at all or it could be that the oil pump chain has failed and the engine is seized, did you get any lights on the dash?
Hi i have similar noise but my one it’s only 3-4 sec long and it’s only sometimes in the morning and my car it’s from 2015 Om651 you think that will be same issues?
@@lukaszszumilas9089 my opinion is the timing chain. You have to change timing chain the guides and tensioner. just the tensioner won't solve the problem
Hello, does the problem occur on the W205 body with this engine? Car 2019 restyling 220d 4matic. Could you please tell me the original numbers of the rockers and hydraulic compensators, as well as the gaskets that need to be changed during repairs???
Bonjour je suis chauffeur de taxi est j’ai le même problème sur ma classe e puije rouler avec se problème ? Ou je risque de détériorer le moteur ? Cordialement
We advise you to get it sorted as soon as possible and not to drive it in this state for long hours and don’t advise harsh driving. I see you’re in France and we would be more than happy to help you with this problem.
@@enkamotors7012 merci beaucoup pour c’est information vous me conseillerais qqun près de Lyon qui serait faire se genre de réparation cordialement merci
@@sophianelhamri8013 I would say look for Mercedes Specialist in and around the area but as I can see Lyon is only a 9 hour drive from us and I would be more than happy to repair your vehicle and help you with everything if it suits you.
@@enkamotors7012 sa serai avec grand plaisir!! mais sa serai trop compliqué pour moi de venir jusqu’en Angleterre, mais merci beaucoup pour toute ces informations je vais essayer de trouver un Mecano vers chez moi qui puisse me changer les poussoirs hydraulique en espérant que sa soit que sa..
Ola tudo bem,sou do brasil e sigo voces aqui pelo youtube, estou fazendo uma manutencao em um veiculo sprinter 907 com motor om 654 se tiver o manual de reparacao desse motor para poder compartilhar comigo ficarei muito grato
Yok yağ eksiltmiyor daha önce bende w211 vardi 220d 15 defa Türkiyeye gittim calisirken motor yağ kapagini açtigimda bu basinc yoktu acaba om654 motor çaliṣma sistemimi farkli Teṣekkür ederim hayirli ìṣler dilerim.
@@ozcangirgin7648 654 ler de iki tane EGR var o yuzden basinc fazla oluyor o yuzden zaten piyano tuskarini bozuyor 100000 km den sonra problemler baslar.
Yo cambié dos veces el árbol de levas y el problema persistía.Dura la reparación 100000km Una ruina de motor y una mecánica poco fiable.No volveré a comprar Mercedes nunca.Son un desastre
Hello guys My name It is Cosmin and i live in Romania, i have the same car E clase engine OM654 Please help me with codes for This reparation( What you change in This video) I am very glad If you want to help me Best regards!
You guys are really helping people out. Unlike other garages who give you empty promises and dont fix anything. Just taking your money. I'm glad that there are people willing to take the time, inspect and find the exact problem and then fix it step by step. God bless you guys! You are a real hope for the people who lack the knowledge in fixing cars. I wish that there were more of you, but sadly there isnt much.
A real gem,Fantastic service,Great value and a family owned business who take great pride in their work.l would highly recommend them,especially if you got Mercedes,
I visited the workshop they diagnosed my Mercedes about the knocking sound ,they gave me the part numbers they told me to buy it and we will fit them in and we have managed to fix it today,I’m super happy. I would recommend these guys hundred percent. They are trustworthy unlike other garages. Thank you very much, you are saving so many people time and money.
I'm an MB tech, we've done dozens of these on the early 654 models, the rollers are modified and it's not an issue on the later ones. The biggest issue at the minute with these engines is the tandem vac/oil pump leaking oil into the vacuum system and eventually the brake servo
Hi Alan from which year they used modified rollers?
Yes, I am also curious about it. Are those issues also present at motors OM 654.916 built in c class 180/200d?
Yes I am interesting for that also.
And for the first engines, do Mercedes take in charge the modification ?
Hi. 2019 year's rockers is modified?
Later one models has this issue? 19/20 plate?
What a soothing voice ! Oscar worthy. Enka 4eva
These guys are really cool . Yep and deserve to get the business as they do what they say they will do . Respect .
The guys at Enka Motors fixed my Mercedes camshafts, rocker arms and tappetts yesterday, I highly recommend this garage, very friendly and knowledgeable, good price also.
Take a book it’s not a 2 minute job!
How much did you pay for everything. Parts and labour.
@@OsamaKhan-mh3ri The guys at Enka will give you a list of all the parts you need from Mercedes, £1100 for the parts, labour was £600 inc VAT
Where is erika motors located pls ?
Where are you guys located? I’m having the same issues
@@MickSweeney-qe3od thanks for the message. I just saw it. Had the notification off. It was for a friends car. The noise seems to have gone away for some reason. Sure it’ll be back. I’ll forward your advice to him. Thanks again.
Perfect job guys! Im proudly because i found you! Im alex whit first mercedes! The garage is the best! Go with trust 💪💪 Thank you guys
Hi Enka Motors,would like to praise you guys for the Good work you carry out for the mercedes owners. As a Tech myself,familiar with these Engines would recommend to clean out the carbon build up in the Inlet manifold & both EGR Coolers too. This will improve Engine Running Efficiently aswell. God bless & keep up Good work 👏 .
Thank you very much for your advice my friend, we will definitely take this into account for future jobs. For example, we’re currently repairing a snapped timing chain, but we’ll make sure to clean the inlet manifolds and EGR coolers as you said. 👍
Hi l have same engine and have been diagnosed with knock sensor do you know where it’s located plz
You need know which knock sensor is front or rear ?
It looks like an oxygen sensor, the wiring has a Alloy flat Square block/ connector.
Hi yes you was right obd shows nox bank 1 sensor 1 circuit
Do you know if it’s front engine or underneath ?
Thanx for great videos
My car had same issues. Model 2019 only 98000 . Milles . He fix it last week . Running good no noise anymore. Thanks a lots xx
How much did you cost if you don’t mind me asking?
My friends 654 had this issue.. and I’ve got the same engine with 143k and so far I haven’t had that noise but it worries me so much.. thanks for the detailed explanation..
1:53 exact sound of my e200t m654.916 engine....so presumably it is the same child disease as seen in Enka motors garage for 25 times :)))).
Globalization killed Stuttgart three point star! So today MB car paid 54k Euros with 340k Autobahn kilometers driven since 10/2019 has this kind of problem?! You may say I'm stupid, but it wasn't like that in last century. Cars used to work for much longer intervals without serious interventions like my E klass needs! Much respect for your videos&work! Long live & stay well !
Thanks for the video it really helped me on the job i had on w213.
I work at MB and I've done them under warranty in cars with 30-60km of mileage, which is 18-40k miles ;) Once u hear It once, it is easier for you to hear them failing in the early stage.
Hi,
should owners with OM 654.916 engines from 2019. should be concerend about this issue?
These engines are built in c180d models.
@@ludimilojko8607 Yes. All 654 engines. Even in 2022 new cars, but Mercedes "claims" that they solved the issue, but they did not.
@@Cribs00 Thanks on honest answer ;-)
Actually, I purchased c180d two months ago. It was 3 years old and had 25.000 km. On monday I was in MB's workshop on recall action due to some valve in cooling system and SW update for engine ecu. MB figured out that the regulation of cooling can cause water pump membrane failure.
Subjective observatio after sw update: more vibrations in idle mode?
Another thing is, whether to continue to do services at MB workshop or do it by myself. Changing oil and filters is not so difficult and I have my own garage with 2m deep oppening in floor.
Can you share with us, who is om supplier for mercedes parts?
I saw beside mercedes number also model number and logo of supplier.
E.g. air filter for om 654 is usually from MAHLE, as well as oil filter.
Diesel filter is from MANN HUMMEL, right?
The question is, does it make sense to by om mercedes or aftermarkt?
Air OM filter is around 70€ and aftermarkt 30€.
@@ludimilojko8607 Change your rocker arms if you want to drive this car for long time. If you do it early, you won't damage camshafts which are very expensive to replace. Just buy them made by INA.
Do oil change yourself. A lot of mechanics in my dealership did not change oil in customers car. Change oil every 10k-15kkm. Its very simple. You wiill have to open secret ASSYST menu to measure exact amount of oil in your engine. Also you will have to buy one time use plastic oil drain screw. I am not sure of supplier of MB parts. Daimler tries to hide it. For filters use Mann, Mahle, Knecht, Kengst. Don't buy original filters from MB. They are rip off. Overall, do simple service by yourself and only go to dealership for bigger repairs.
@@ludimilojko8607 And one last thing. CHANGE YOUR WATER PUMP! There is an issue in this engine where it breaks and coolant is being sucked up into vacuum system. If that happens, repair is very expensive. Engine, transmission, timing chain will have to be taken out and oil/vacuum pump will have to be changed and a lot of other parts Read about it in internet.
good job, a little tip, check the silencer rubber on the gear wheel of the high pressure pump, I have had 3 cases so far, the rubber had come loose.2 pieces OM 656 and one OM 654.
Guys, is there a problem with the om654de16 engine? What should we pay attention to in om654 1.6 version?
im looking for one of these benz will keeep this in mind great video love it when you guys save peoples cars for alot less money good job
Hello I have the same issue.
How much ius the total cost including labour and parts pls ?
Awesome Job I also Have An w213 e300 but I’m in the US I hope I could fly you out if I ever ran into this issue once I’m out of warranty Lool 😆😆😆
Does it still happen on newer sprinters with the 654 engine ? 2022-2023 model. We a few at work with the 651 and 654 engine. The one i'm driving has almost 15.000km on it, oil consumption goes down as we drive more ( engine break-in period ). Had to add about 1L after 4000km. Consumption is way less now
And what about the missing rollers from the bearing?
Leaving them inside for the oil pump to eat?
And than get the engine damaged?
Some of the rollers from the rocker arms bearings can even get into the timing chain and can causs serious damage there.
Good work I like it I am very happy to
Send this video to the garage to fix my car. Thank you very much.
Great job guys!!!
Perfect explanation
Hi, i think im having the same issue with my vehicle i was wondering if you could let me know of a rough estimate on how much the parts will cost? Also the price for labour if possible thanks a lot :)
can I ask the part number at 3:52 ? and the part name..thanks!
I have done a few of these in the past, its an easy fix tbh.
I done mine in same place very satisfied many tx
I have a 2016 plate with same sound, getting some blow back also through air box. Is this what you see ? Thanks😢
Hello, from what year of construction do the OM654 engines have no problems with rocker arms
Starts from 2016
@@enkamotors7012 from what year did MB remedy this problem?
@@shaungilmartin1505they don’t know i think or don’t want😅
Hello,does anyone know from each year Mercedes improved those problems for om654?
2016 onwards 654 engine.
Would you say this failure could be avoided or prolonged by changing the oil a lot earlier?
Possibly could be prolonged to a certain extent, the reason these rocker arms fail is because factory arms on the engine they don't seem high quality whereas the replacement ones are branded and seem better quality. Another reason, for them failing is the excessive pressure on the exhaust side dpf, cat convertor and two egrs etc.
It is normal when you open oil fill cup, and smoke coming out? And the cap can float in the air ?! I can’t find anywhere such and info
Very good I have a same mercedes with same issue knoking noise during start engine for the first time in the morning time.
The knoking noises are for few seconds only
What do you think is the issue and which parts are worn out.
Thanks in advance
Regards.
Paul
From your description, it seems that the issue would be the timing chain rather than the rocker arms. Timing chain issues will usually only make a noise when you first start the car whereas a rocker arm issue would be heard every time. Rocker arm issues will also have a knocking noise to them whereas timing chain issues will have a grinding/shuddering noise which will last a few seconds and get quieter. We have a few videos that show timing chain issues, you can browse them to compare the noise between your car and the one in the videos. I hope that was helpful
Thank a lot for your feedback.
O have a video but unfortunatly I can't upload it in comment section,can I have your email address or WhatsApp number to send you the video.
Thank you very much
When you change that, that new parts are the better quality or the same with the original?
The old rocker arms that comes off the engine they don’t have part number, barcode or brand on it. The new ones are INA brand and have barcode and are the upgraded better quality ones.
Perfect Job!!!
I was planning to buy 2017 e class. I am bit confused now. Would you still recommend 2017 merc e class?
Yes I would still recommend a 2017 e class, the 645 engine has only this rocker arm problem, which usually arises after the car has reached 100,000 miles or 150,000 km. The rest of the car is good 😊
Iv just bought one 70 plate e220d...hope it stays good...where are u based
How much would you charge to do this on a 2017 Mercedes Benz 654 engine?
And how long would it take?
Hi Enka motors please can you much the total parts cost? Also how much is the labour? Thanks
Hi it will be nice for you to give us a call so we can discuss what parts you need and the cost of labour many thanks..02088842200 ENKA MOTORS
Do you think an egr delete would reduce the risk of these issues? Thanks
No.
Hello bro, I have a same issue in my car. May I know how much it cost parts and labour please let me know thank you.
Very helpful content
How much does cost to fix it 2016 model Mercedes Benz E?
I have the same noise at the cold start but in 5-6 sec its going away should i worry about this?
Hi i don't think is the same noise your one looks like timing chain noise. You could watch our videos about timing chain in our channel.
@@enkamotors7012 i dont know,I hear similar noise at cold starts and goes away in 4-5 second but i will check out your timing chain videos thanks for your answer
Your one is timing chain because I had same problem but mine was camshaft and timing chain Mercedes start to changing the timing chain for free because dvla told them so it’s recall
@@aftabexpress thanks for your reply,so mercedes can change timing chain for free? i bought the car from random dealership is that does it matter?
@@Sozzi924 no it doesn’t matter I’ve got the letter and Mercedes doing it free because dvla told them to do it so they have to do it just book your car they will do it
im going to do same job on mine . what do i need for parts ? 4 copperwasher for injectors and all the rocker arms and lifters. and headvalv gasket is it any more ? 😁
16x rocker arms
16x hydraulic lifters
4 copper injector washer
Rocker cover gaskets comes 3 piece
2 gaskets under the camshaft carrier
Engine oil and oil filter
And get camshafts just in case they excessively worn if not you can return it without opening box
@@enkamotors7012 thanks so much 😃
@@enkamotors7012bro please I need help to fix my car what is ur address please?
Hi Enka, thanks for the video. You did explain it amazingly! How would you rate the engine that is in c200d 2015, one with the 136hp i heard it's Renault R9M engine. I recently traded in for the s205 and i little worried about reliability.
Wouldn’t advise any engine that’s related to Renault
Hi, can you please dm me with how much will cost? I’m based in London. Thanks
Hi can you call us 0208884220 ENKA MOTORS many thanks
Hi I’ve just emailed you a video of my w213 as I’m getting a whining sound after acceleration, what could it be? Thanks
What is cost to fix this problem in E class 2017.
Call us tomorrow 8:30-6
Hi, same issue been told by Mercedes Brighton, on a E class w213 220 with just 60.000 miles and all the services done with them. Can I have your number to discuss if you can help fix this. Regards Danny
02088842200 enka motors
Where did you get the bumper protector from?
Are there same issues present at om654.916 engines built in face lifted c class c180/200d?
It is 1.6L 122hp or 160hp and supose it is the same engine with different ecu maps.
c180 uses Renault engines
Hi I was watching this video having a go on my engine
My pin came out the gear and it’s spoken can I just turn it back and put the pin back in
Hello
Mr,
Do you have codes and exact names of partes that need to be changed?
Thanks
Rocker arms set
Hydraulic lifters set
Rocker cover gaskets
Gasket under camshaft carrier
4 injector washers with new bolts
@@enkamotors7012 thanks very much!!! Very useful video!!! 🙏👍🤗
Dear mr, what tools are needed for putting back the distribution? I’ mean the upper axes thanks
@@vasilemuresan6957 654 589 01 4000 tool number.
@@enkamotors7012 Thanks a lot for all!! if i stayed in UK definetly i come to you with my e class....now i try to find a mechanic here in Romania!!!!
I live in London, how I can get in touch with you guys? Thanks
02088842200 is the correct number
How much will it cost everything for a 2017 E class?
£1800
How much do you charge for e350 2011 v6?
Emissions regulations have definitely killed the diesel engine. No matter how good a diesel you put in it, with 2 egr's and a massive DPF - there's no way the engine will last. It's a shame because all this does is cause more pollution in the end, also making people poorer by having them spend thousands for new parts and new cars. Much better were the times when you could buy a Mercedes and you were guaranteed for 20 years of usage - 300k miles!
How much does the job cost?
Too much mate with parts around 3k
I wanted e220d for myself, but now i doubt
Does anyone have the parts list that is needed?
Hi brother how mush the cost please .
Thank you
Boubker
Hi where are you based please? I need you quote me for doing the rockers, my W213 sounds like a tractor.
North London Tottenham, call us on 02088842200
Where are you based? And what is the cost of this? My car has just started doing this
North London 02088842200
Hello brother are base in Tottenham ? Thank you I have a knocking nose o my Mercedes’ E class w213 2017 thank you 🙏
Yes, we’re based in Tottenham, we’re called ENKA Motors
You guys still based in the same place
I have the same noise in my engine, and i have an additional problem of not having the ability of using the car pallets, and what i notice in parallel is that my car can't go further than D7, so it doens"t reach D9 anymore.
This noise indicates a problem with the camshaft or rocker arms, causing your engine to go into safety mode and your car to slow down so you can’t reach D9 anymore.
Hi how much do you charge for this job thank you if I buy the parts for you
02088842200 call as.
Is there any way I can send you a video of my vehicle? Been into the dealer twice now and both times they say it’s normal 🤷🏻♂️ doesn’t sound right to me! Aa recovered the car in too as they think it doesn’t sound right either?
enkamotors@gmail.com
@@enkamotors7012 sent. Thank u!
@@kishanraja9139 my friend I watched the video and that noise does not sound like the rocker arms, either something wrong with the timing chain or engine internally
@@enkamotors7012 thank you! So definitely not normal? - cars been to the dealer twice and they’ve said it is fine.
Bu problemler de16 versiyonda var mı? Yani 1.6 olanında?
1.6 larda bu sorun gormedim ama onlarda zincir problemi var.
@@enkamotors7012 eksantrik zinciri ?
exsantrik zinciri@@positive634
@@enkamotors7012ustam, bildiğimiz üzere. Zincir, bakımlar aksatılmadığı sürece 200bin kilometrelere kadar, hatta daha fazla dayanabilen bir bileşen. Om654 de16 da bunun erkenden ses yapmasına veya arızalanmasına neden olan bir durumdan bahsediyoruz sanırım? Tam olarak bizi bu motorda bekleyen sürprizin sebebi nedir değerli üstadım?
1:55
10:58
I drove the car with this noise to get it home it was an hour journey the car just suddenly cut off on m40 and won't start anymore is this the same issue?
I don’t think it’s the same issue, a knocking noise coming from the engine wouldn’t lead to a car shutting off, but it could be that there was an issue with the timing chain of the car: either it snapped or jumped
@@enkamotors7012 would that cause the car to not tick over?
@@adz3133 if the timing chain is snapped then the engine wont tick over at all or it could be that the oil pump chain has failed and the engine is seized, did you get any lights on the dash?
@@enkamotors7012 last owner apparently got all lights on dash wiped
@@adz3133 what make and model is your vehicle
Hi i have similar noise but my one it’s only 3-4 sec long and it’s only sometimes in the morning and my car it’s from 2015 Om651 you think that will be same issues?
Hi your problem is the timing chain it's not the same problem as in the video many thanks
@@enkamotors7012 timing chain was checked it’s good stretch and tensioner was replaced.
@@lukaszszumilas9089 my opinion is the timing chain. You have to change timing chain the guides and tensioner. just the tensioner won't solve the problem
How many miles
On your merc ?
@@arthurmassen9628 at the moment 92k
Hi can you drive with this knocking?
Hi if you drive with this noise you will damage the camshaft i recommend you to get it fixed as quick as you can. Many thanks
Hi, where r u based? I have same issue.
Enka Motors
Unit C 200 Willoughby Lane
Tottenham
London
N17 0SQ
Hello brother my Mercedes Benz E class has same problem how can I contact you please 🙏
Please call us Monday to Saturday 9AM-6PM. 02088842200
On my w213 do in 220k mile
Hi can I send you a video of mine eclass for your a opinion, if mine is doing
Hello, you can send the video to enkamotors@gmail.com and we will be in touch
Hi, i have the same problem on my car. Can you fix it please
Call us on 02088842200. Monday to Saturday 9-6
Where is your garage really need one good mechanic
N17 0SQ enka motors
Hello, does the problem occur on the W205 body with this engine? Car 2019 restyling 220d 4matic. Could you please tell me the original numbers of the rockers and hydraulic compensators, as well as the gaskets that need to be changed during repairs???
Bonjour je suis chauffeur de taxi est j’ai le même problème sur ma classe e puije rouler avec se problème ? Ou je risque de détériorer le moteur ? Cordialement
We advise you to get it sorted as soon as possible and not to drive it in this state for long hours and don’t advise harsh driving. I see you’re in France and we would be more than happy to help you with this problem.
@@enkamotors7012 merci beaucoup pour c’est information vous me conseillerais qqun près de Lyon qui serait faire se genre de réparation cordialement merci
@@sophianelhamri8013 I would say look for Mercedes Specialist in and around the area but as I can see Lyon is only a 9 hour drive from us and I would be more than happy to repair your vehicle and help you with everything if it suits you.
@@enkamotors7012 sa serai avec grand plaisir!! mais sa serai trop compliqué pour moi de venir jusqu’en Angleterre, mais merci beaucoup pour toute ces informations je vais essayer de trouver un Mecano vers chez moi qui puisse me changer les poussoirs hydraulique en espérant que sa soit que sa..
Ola tudo bem,sou do brasil e sigo voces aqui pelo youtube, estou fazendo uma manutencao em um veiculo sprinter 907 com motor om 654 se tiver o manual de reparacao desse motor para poder compartilhar comigo ficarei muito grato
1.5 dci is very good k9,but no the 1.6!
Slm Kardes benimde w213 e220d var yağ kapagini motor çaliṣirken açiyorum motor buhar atiyor basinçli
Normalmi?
Mgf
Aleykumselam. Fazla basinc normal degil. Km kac birde yag eksiltiyormu yag eksiltmiyorsa problem degil.
Teṣekkür ederim kardeşim araba 2018 model 60.000 km
Yok yağ eksiltmiyor daha önce bende w211 vardi 220d 15 defa Türkiyeye gittim calisirken motor yağ kapagini açtigimda bu basinc yoktu acaba om654 motor çaliṣma sistemimi farkli Teṣekkür ederim hayirli ìṣler dilerim.
@@ozcangirgin7648 654 ler de iki tane EGR var o yuzden basinc fazla oluyor o yuzden zaten piyano tuskarini bozuyor 100000 km den sonra problemler baslar.
@@enkamotors7012 kardeşim Teşekkür ederim.
Thank you for sharing this work with us. I am a mechanic from Morocco. There are no om654 spare parts. Can you help me?
I would lile to bring my car to you. Where are you based
N17 0SQ
Yo cambié dos veces el árbol de levas y el problema persistía.Dura la reparación 100000km
Una ruina de motor y una mecánica poco fiable.No volveré a comprar Mercedes nunca.Son un desastre
Hi, please your address!!! My car have same problem
Every 80 000-100 000km new set,new modified are same any other thing is a lie,the whole design of engine is failure.
Hello guys
My name It is Cosmin and i live in Romania, i have the same car E clase engine OM654
Please help me with codes for This reparation( What you change in This video)
I am very glad If you want to help me
Best regards!
rocker arm and hydraulic lifters.
It is possible to Give me the code Please?
Benz’s are junk…
Hydrostößels
🤷♂️
thanks u for showning this , now i gonna fix cars and i gon earn money but u gonna lose costumeres
Same problem bro can u give me conctact number
02088842200
Hello bro, I have a same issue in my car. May I know how much it cost parts and labour please let me know thank you.
parts £1200
How much labour
@@faisal78633 £500 + vat