I've never used MSI Gungnir 110R, so I can't give you a definite answer. However, I don't think there will be a big problem if it's a PC case with a general layout.
I bought it at an internet shopping mall in Korea because I live in Korea. As you said, when I looked up Amazon, it was only version 3.0. If you live in an area where AliExpress is available, search for AliExpress. You can find it right away by searching 'coolermaster riser' on AliExpress.
하단 남은공간 사진 아래 링크로 첨부해드립니다. 25T 팬은 조금 공간이 부족해보이네요. postfiles.pstatic.net/MjAyMjAyMTVfMzcg/MDAxNjQ0ODc0MDkyNDUy.5wY3wTWwYlrq-KyWlGkcJbdzZk9qxQjpc_kN0-tqZVIg.BQxCWdBVG8E1Y3IsPpNR4BKcgEjwI-EfNo5xKTkeRUkg.JPEG.an2gen3/20220211_152510.jpg?type=w966
It is a case that uses a chassis frame similar to the PC case I used. I don't think there will be a big problem with the installation, but I can't guarantee it, T.T In my case, there was no problem with case compatibility, but unexpectedly, there was some interference due to the long heat sink length of the first slot motherboard M2. I solved it by bending the end of the riser bracket a little.
@@DalraeMyo Thnx for info.I think too,that there should be no problems with my case,maybe with my cpu cooler (Noctua) there might be some adjustments needed.Thnx again.
Thank you you are the only person i found to use that riseer kit in a meshify . Now i know i can do it too!
Thaks for this. I bought support Thermalright TR-GCSF PLUS ARGB thanks to you.
WAIT.... did you use zippo fuel to clean your thermal paste??????????
터프... 너무 이쁘다 ....
마무리 데코까지 직이네요 ㅎ
I have the MSI Gungnir 110R will this do the job?
I've never used MSI Gungnir 110R, so I can't give you a definite answer. However, I don't think there will be a big problem if it's a PC case with a general layout.
@@DalraeMyo Thank you for your input!
@@DalraeMyo subbed!
can you do temp test before and after ?
I don't have it now, but when I used the riser kit, there was no merit other than the outward satisfaction.
The temperature was better in the normal installation without the riser kit.
However, it was not a worrying difference.
@@DalraeMyo like how much are we talking 70-80 degrees ?
@@mahdijazmaz4922 It was about 67 degrees before the riser card was installed, and 68 to 69 degrees after the riser card was installed.
@@DalraeMyo oh thats nothing thank you so much ❤
God where did you get the the 4.0 v only 3.0 on amazon 😭😭
I bought it at an internet shopping mall in Korea because I live in Korea. As you said, when I looked up Amazon, it was only version 3.0. If you live in an area where AliExpress is available, search for AliExpress. You can find it right away by searching 'coolermaster riser' on AliExpress.
Can buy on ali but i will never get it already got couple item that i mever received from ali
Nice
7슬롯을 다 쓰는건가요?
하단에 팬이 있는 구조라 7슬롯을 쓰더라도 클카 꼽는 곳은 약간 떠서 6슬롯까지만 먹으면 딱인데
하단 남은공간 사진 아래 링크로 첨부해드립니다. 25T 팬은 조금 공간이 부족해보이네요.
postfiles.pstatic.net/MjAyMjAyMTVfMzcg/MDAxNjQ0ODc0MDkyNDUy.5wY3wTWwYlrq-KyWlGkcJbdzZk9qxQjpc_kN0-tqZVIg.BQxCWdBVG8E1Y3IsPpNR4BKcgEjwI-EfNo5xKTkeRUkg.JPEG.an2gen3/20220211_152510.jpg?type=w966
I have a Fractal Design Meshify 2 XL case and Asus RTX 3080 10gb Tuf gaming GPU,will it fit on this bracket ?
It is a case that uses a chassis frame similar to the PC case I used. I don't think there will be a big problem with the installation, but I can't guarantee it, T.T
In my case, there was no problem with case compatibility, but unexpectedly, there was some interference due to the long heat sink length of the first slot motherboard M2. I solved it by bending the end of the riser bracket a little.
@@DalraeMyo Thnx for info.I think too,that there should be no problems with my case,maybe with my cpu cooler (Noctua) there might be some
adjustments needed.Thnx again.
@@realkekec4028 If it is not an AIO cooler, interference is certainly expected.
@@realkekec4028 I wish you good results.
@@DalraeMyo Thnx.
라이터신공....!
케이스 이름 알수있을까요?
Fractal Design Meshify 2 Compact Light TG 입니다.
감사합니다. 12600k ak620인데 케이스 결정하기가 힘드네요. 올리신 h510 flow 영상만 계속 보면서 뭘살지 고민중입니다 ㅋㅋ 이케이스도 괜찮아보이네요!
@@gogiso-r6u 충분히 고민해보시고 마음에드는 케이스로 선택하시면 좋겠습니다. 두 케이스다 매력있는 케이스라고 생각합니다.
SAGS