Harbor freight sells cheap engine (not outboard) stands with casters. Modify them with three sheets of plywood. Maybe a few more dollars, but only 15 minutes of your time. $62 regular, on sale for $50 all the time.
Great tip on getting the casters, thanks! If I were going to make several of these, I'd put something, like thin, 1/4"? plywood on top when cutting one out, then using that as template for the others. But you have that CNC machine so no need... :)
Niffy little stand. Seems good for transportation purposes but when it comes to testing a running motor in a bucket of water, the one with the wheels is for the job.
Its a good measurement, no matter what unit of measurement your country uses, it still translates. A good universal measurement. Here in the US, its 21 cu.ft Canada, 595 Liters.
Looks like this stand is perfect for your midget motor lol I have a 9.9 Merc motor that would work on as well. But then i have a bit older 25hp Merc and a really old ,great running 40hp Merc motor thats about the size of a huge trashcan because its so old.LOL I need to make a stand that will hold the 40 and 25hp motors and then a smaller one for the two 9.9s i have. One runs while the other was offered to me for parts for free by the guy i bought the motor off of. The 9.9 was used at a boat rental place i purchased it from along with one of their fiber boats.Back in the day i paid 400bucks for the Boat,motor and spare motor for parts and i thought that was cheap.The boat was a tank though and bent the truck rack it was put on to get it to my house! hehehe I loved that old rental boat it had a nice hand crafted wooden rail around the whole thing a nd the seats were such that it only had drain holes to allow the water to flow back to where the plug was. So i could use sections ,between the seats to toss the crabs until we got back to dock with them to throw in a basket! lol It was easy to keep a large container/bucket/cooler for a make shift live bait well for us if we were fishing and Could fits 4 people on this outboard quite comfortably! It had a 1person built in seat in the bow and then three other bench style seats in it. The boat was so heavy and sea worthy that once i threw a new 25hp motor on it the thing still got up on plain! Sorry i ever got rid of it?! :>( In any case i want to build stands my self to better store the motors i have because sooner then later i will get another boat. If anything were to happy in our area i may need another way to get out of my area of the state other then automobile transportation? Living on South Jersey's southern most point in Cape May if it were summer and we had to evacuate the area for any reason we may have to bug out via the Delaware bay. We may be forced to leave our vehicles behind and flee on a boat. This one would have been perfect for that as it was a very solid boat fitted with a nice canvas cover it would be the fastest way out of our state with Delaware only 17miles away. If we had to drive and in our tourist area if it was loaded with people it would be bumper to bumper traffic and we may never make it out of the area before what ever emergency hits? So keeping these motors store properly and getting a new boat is paramount for me.....Thanks this is a great idea and i can duplicate it very easily although i already have the materials for either stand i would need so its kind of free materials as all of it is left over from old jobs or trash picked from dumpsters as many builders are very wasteful! :>/ Well thanks again for the video and the idea! good stuff
I like your design, it might hold as big as a 15hp ! I am an AOMCI member and go to a lot of swap meets and being able to dismantle them for space is a plus . Between my buddies Ron and Phil and Ben and I we usually bring 20 or so outboards to the meets . Painted in Holiday Bronze or Sea Horse Green or black they would show really well ! I think the square blocks might hold better and a 10 deg. Angle on the transom plate might help . Just a thought ! 👍👍
@@BrandonsGarage I can’t imagine how much to ship ! Lol. But thank you very much !! I plan on making a few myself but going to review the video for measurements if that’s ok with you !
@@BrandonsGarage thank you much ! If you need any parts for OMC just let me know because here in Minnesota we do have a few outboards ! Lol . I have a few 1950’s and 60’s laying around . Even turtle tops ! Lol
This is probable the BEST RUclips video I have seen. OBTW I watch a lot just ask my wife. THANK YOU BRANDON! I will be building one for my 1988 Evenrude 6 hp.
I don't know, never done anything to it yet. Plan was to do a video on it this summer. Cost me $18 at an auction. The only other bidder was furious I was out-bidding him.
Man go check your harbor freight dumpsters there is almost always them furniture dollies casters always good but the wood is usually cracked just throwing that out there
Nice. This actually gave me a lot of ideas for new outboard stands. I have 5 outboards and zero good stands for them. Would it be nonsense to try that with a U-beam as the post? I would imagine it would be a bit more rigid compared to the pipes. ...ain't saying nothing no more about your audio "improvements" (just stop buying your audio stuff from Eugene)
U-Beam, or C-channel, is what the factory one uses. What ideas do you have? The U channel will be more difficult to install, when I scale it up for a larger engine, say a 40 HP+, I'll figure that out. The audio used to be perfect, until I lost my phone; The replacement cuts in and out, and is just ridiculous. I bought a $450 entry lever professional camera. Good audio, terrible video quality. Tried the ladies iPhone 10/11?, figured that would do it... Great audio, but lighting in the garage would need to be absolutely perfect, as it tries to over adjust the darker areas. On a black power-head, you can't see anything other than a dark area where parts might be. I need to figure something out before summer comes and I start getting into projects again.
Buying a new bit to drill the 7/8” holes? Why? You’re cutting the squares on the CNC, just run a drilling tool path and drill them out while the machine cuts out the parts.
When I read this comment, I thought to myself "Why didnt I do that?!" Then I remembered. A) The spacing needs to be the same on the base as the head unit. Head unit needs to be drilled after its assembled; by the time that happens I would have forgotten the spacing. However now that I think about it, I could have made a drill guide out of the remaining scrap to solve this. B) I only have enough tubing left to make 2 stands. The next stand may use iron pipe, or conduit, which may have a different OD. C) I forgot the 3rd reason. Now, I could do all of the cuts in the head and base should I use square tubing. Problem there is I would need to go in with a square broach to square off the rounded corners.
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Paint those babies for a showroom presentation. Love the design!
Loved this video. Thank you. Chris from Iowa
Great job I need about 4 of those myself thanks for the videos Merry Christmas and happy new year 🎆🎈🎊
That thing looks sweet!!
Harbor freight sells cheap engine (not outboard) stands with casters. Modify them with three sheets of plywood. Maybe a few more dollars, but only 15 minutes of your time. $62 regular, on sale for $50 all the time.
Who cares about sound, you got over the idea of how to make the stand(s). Thanks for sharing ...
Great tip on getting the casters, thanks!
If I were going to make several of these, I'd put something, like thin, 1/4"? plywood on top when cutting one out, then using that as template for the others. But you have that CNC machine so no need... :)
sweet design...will make one. thanks
Great style,great idea, great product to sell .
It’s perfect 👌 nice for presentation. Would you consider putting casters on it?
Niffy little stand. Seems good for transportation purposes but when it comes to testing a running motor in a bucket of water, the one with the wheels is for the job.
Brandon, can I borrow your set of oem control box keys?? I have a box and the number is too faded on the front to read
"In the trunk of a roadmaster" ... I haven't used "Trunk of a roadmaster" used as a unit of measure in a while. Stand looks good man.
Its a good measurement, no matter what unit of measurement your country uses, it still translates. A good universal measurement.
Here in the US, its 21 cu.ft
Canada, 595 Liters.
@@BrandonsGarage I Brandon.
@@BrandonsGarage I'm watching you on RUclips. Bravo.
@@BrandonsGarage Is there any good mechanic like you in Italy ?, I really think not, You make these repairs seem so simple !, Bravo again, Hello
Works great, good job! Still need to work on the sound, it was all over the place.
hey man i have a yamaha wave runner it runnes and everything and i wanted to see if maybe you would want to buy it
Nice work
creative channels, hopefully you will always be successful🙏🙏
Looks like this stand is perfect for your midget motor lol I have a 9.9 Merc motor that would work on as well. But then i have a bit older 25hp Merc and a really old ,great running 40hp Merc motor thats about the size of a huge trashcan because its so old.LOL I need to make a stand that will hold the 40 and 25hp motors and then a smaller one for the two 9.9s i have. One runs while the other was offered to me for parts for free by the guy i bought the motor off of. The 9.9 was used at a boat rental place i purchased it from along with one of their fiber boats.Back in the day i paid 400bucks for the Boat,motor and spare motor for parts and i thought that was cheap.The boat was a tank though and bent the truck rack it was put on to get it to my house! hehehe I loved that old rental boat it had a nice hand crafted wooden rail around the whole thing a nd the seats were such that it only had drain holes to allow the water to flow back to where the plug was. So i could use sections ,between the seats to toss the crabs until we got back to dock with them to throw in a basket! lol It was easy to keep a large container/bucket/cooler for a make shift live bait well for us if we were fishing and Could fits 4 people on this outboard quite comfortably! It had a 1person built in seat in the bow and then three other bench style seats in it. The boat was so heavy and sea worthy that once i threw a new 25hp motor on it the thing still got up on plain! Sorry i ever got rid of it?! :>( In any case i want to build stands my self to better store the motors i have because sooner then later i will get another boat. If anything were to happy in our area i may need another way to get out of my area of the state other then automobile transportation? Living on South Jersey's southern most point in Cape May if it were summer and we had to evacuate the area for any reason we may have to bug out via the Delaware bay. We may be forced to leave our vehicles behind and flee on a boat. This one would have been perfect for that as it was a very solid boat fitted with a nice canvas cover it would be the fastest way out of our state with Delaware only 17miles away. If we had to drive and in our tourist area if it was loaded with people it would be bumper to bumper traffic and we may never make it out of the area before what ever emergency hits? So keeping these motors store properly and getting a new boat is paramount for me.....Thanks this is a great idea and i can duplicate it very easily although i already have the materials for either stand i would need so its kind of free materials as all of it is left over from old jobs or trash picked from dumpsters as many builders are very wasteful! :>/ Well thanks again for the video and the idea! good stuff
Link to the video where you built the CNC please?
ruclips.net/video/tYsvz9_Pg3Y/видео.html
I like your design, it might hold as big as a 15hp ! I am an AOMCI member and go to a lot of swap meets and being able to dismantle them for space is a plus . Between my buddies Ron and Phil and Ben and I we usually bring 20 or so outboards to the meets . Painted in Holiday Bronze or Sea Horse Green or black they would show really well ! I think the square blocks might hold better and a 10 deg. Angle on the transom plate might help . Just a thought ! 👍👍
I planned to do just that, until it came time, then I said screw it.
Want me to cut you out one? You'll have to assemble though.
@@BrandonsGarage I can’t imagine how much to ship ! Lol. But thank you very much !! I plan on making a few myself but going to review the video for measurements if that’s ok with you !
@@davekimbler2308 Not a problem at all, the main dimension are on the drawing at the end. @ 14:42
@@BrandonsGarage thank you much ! If you need any parts for OMC just let me know because here in Minnesota we do have a few outboards !
Lol . I have a few 1950’s and 60’s laying around . Even turtle tops ! Lol
@@davekimbler2308 Well thanks!
If you want me to send you a cut-out, just email me your address.
I'll be doing something original for my first restore. 1957 mercury mark 10 I got for free. Maybe a lamp leg haha
Would love to buy one!!! How much?
if you have a welder, you can make a nice stand out of an old bedframe..
Hey Brandon, any new Johnson/Evinrude videos coming? 🤩
This is probable the BEST RUclips video I have seen. OBTW I watch a lot just ask my wife. THANK YOU BRANDON! I will be building one for my 1988 Evenrude 6 hp.
Well thanks! I feel the same way about most of my videos too!
Do you like those Turtle Tops ? One of my favorites !
I don't know, never done anything to it yet. Plan was to do a video on it this summer.
Cost me $18 at an auction. The only other bidder was furious I was out-bidding him.
Amazing what the proper tools and skills can do. Your a talented man Sir.
Great work!👍👍 how can I contact you?
My email is in the "about me"
@@BrandonsGarage went to about and it offered me to donate to patron or pay pal. I didn't see your email
by the time I buy all the fancy tools needed to make the "cheap" stand, Id be doing the same job with the amateur model - for $50
but then the next one is darn cheaper.
Brandon you can get all the free lumber you want Just do a little dumpster diving lots of casters to be found alao
Man go check your harbor freight dumpsters there is almost always them furniture dollies casters always good but the wood is usually cracked just throwing that out there
Could you send me the CNC file?
email?
Interesting video but couldn't hear much. Had the volume all up, adverts came in loud but the vid was almost inaudible. Interesting project though
Im addressing this now, thanks for the feedback,
First! Great video!
Would that hold a 200 horse power engine. That's really heavy.
No.
Nice.
This actually gave me a lot of ideas for new outboard stands. I have 5 outboards and zero good stands for them.
Would it be nonsense to try that with a U-beam as the post? I would imagine it would be a bit more rigid compared to the pipes.
...ain't saying nothing no more about your audio "improvements"
(just stop buying your audio stuff from Eugene)
U-Beam, or C-channel, is what the factory one uses. What ideas do you have?
The U channel will be more difficult to install, when I scale it up for a larger engine, say a 40 HP+, I'll figure that out.
The audio used to be perfect, until I lost my phone; The replacement cuts in and out, and is just ridiculous.
I bought a $450 entry lever professional camera. Good audio, terrible video quality. Tried the ladies iPhone 10/11?, figured that would do it...
Great audio, but lighting in the garage would need to be absolutely perfect, as it tries to over adjust the darker areas. On a black power-head, you can't see anything other than a dark area where parts might be.
I need to figure something out before summer comes and I start getting into projects again.
"Pretty deep hole"....That's what he said.
Sorry Brandon, I can only give a C+ on the video. The content was good, but the volume issues killed it.
The stand is cool.
The way you hold a pencil?
That how we do it in the hood.
Buying a new bit to drill the 7/8” holes? Why? You’re cutting the squares on the CNC, just run a drilling tool path and drill them out while the machine cuts out the parts.
When I read this comment, I thought to myself "Why didnt I do that?!"
Then I remembered.
A) The spacing needs to be the same on the base as the head unit. Head unit needs to be drilled after its assembled; by the time that happens I would have forgotten the spacing.
However now that I think about it, I could have made a drill guide out of the remaining scrap to solve this.
B) I only have enough tubing left to make 2 stands. The next stand may use iron pipe, or conduit, which may have a different OD.
C) I forgot the 3rd reason.
Now, I could do all of the cuts in the head and base should I use square tubing.
Problem there is I would need to go in with a square broach to square off the rounded corners.
why dont you sell me one of those,,, how much, and shipping to 33914
Don't be so hard on yourself it isn't that much below average...
You are like my wife , go out of the room and say something . I cant hear you.
I was inches away is the sad part.