Anti roll bar bushes volvo NO SUBFRAME REMOVAL

I removed the antiroll bushes without dropping the subframe. Took a while to do but all fixed now. Good luck.

[@joycedelarosa9304]

Thank you for the vid. I have a p3 V70 3.2 usdm. Now i know i can do it without dropping the subframe.

[@LandRunner84]

Thanks for the video, I've got the same problem on p3 xc70, now I know is possible to do it without touching the subframe!

[@IvegotaroughideaDIYchannel]

If i had to do it again i would probably drop the subframe slightly go gain more room, good luck doing it but it is very tight 🙂

[@bigtd7399]

nice job

[@D17492]

Do you remember what size swaybar in was?

[@colinfarrell7457]

I cant get the u clamp back over the bushing,any ideas how?

[@IvegotaroughideaDIYchannel]

I used a long bolt to force the clamp down to the subframe then put the original bolt back in. Hopefully you manage to do it 🙂

[@colinfarrell7457]

@@IvegotaroughideaDIYchannel thanks for the reply

[@james6901]

you should never use that grease on rubber,,,,red rubber grease.