Видео

Thanks for watching fam🫡 You got one? Let me know how you like it, although I’m sure you’ll love it!

Thanks for watching bro🫡 So my process is pretty much the same I use 1000 or 1500 grit then 3000 then polish and add sealant. I do the same thing to both headlights at the same time so when I’m done with one I’m done with the other. Also sometimes I’ll use my drill attachment to do the sanding (just be careful and tape everything off). Some cases are worse than others that being said the longest I’ve ever took was 45min-1hr max. I hope this helps

@ crazy lol most of my work I start with the same grits as you.. sometimes I need to go down and rarely have to go down to 320. All by hand but for some reason from start to finish on site it’s at least 2 hours. That’s from greeting the customer, taping, taking before photos, doing the work taking the after photos and cleaning up. Next time I’ll have to see how long my sanding process is actually taking. I’ve done work with the drill but haven’t in a long while. Mainly because my drill batteries don’t last long enough and I can’t keep up with the cost of the 3M disks. Too expensive.

What’s up fam. I hadn’t tried it yet. I going to get my hands on some of his products soon, when I do I’ll let you know

@@D.B.K.mobiledetailing let Wayne know that I sent you...I'll be trying his soap and ceramic spray soon....very small brand, no BS

Thanks fam🫡

Thanks for watching 🫡 I love it one of my best investments! Only downside not really an issue tho you can’t use it to extract fluids like soaked fabric it could damage the motor unless you buy the separate component just for that.

Thanks for watching bro. I might change it around eventually. Believe it or not I rarely go to the back until I’m done for the day. It is tight tho

I'm asking because I got a express van and wonder if I can run mine while it's in the van with the side sliding door open

Thanks for watching bro. I have no issues at all it’s in the back of my van with the doors open so the exhaust straight blows out. As long as it’s blowing out the van you shouldn’t have any issues, just keep all the doors open while it’s running

Thanks for watching bro🫡. And yes I would rather spend my money on good equipment than the setup itself as long as it’s in order and helps you be more thorough and efficient that’s all that matters.

I’ve been meaning to hit you up. I also reside in Charlotte and I want to start my own detailing business. Would love to network and maybe learn a few things.

Most definitely bro inbox me on ig

Thanks for watching fam!

🫡

Thanks for watching bro🫡. Ts is definitely some good stuff!

Thanks for watching bro. Facts indeed KC hasn’t let me down. GS on a magic eraser works wonders on light colored vinyls as well

Thanks for watching and great advice!! 💯🫡

Welcome

Thanks for watching bro🫡 prewash or foam rinse takes out a lot of the had work, and safer for the paint on your contact wash

Thanks for watching bro🫡 I think I will. give them a try heard a lot of pppl talking about dark fury. I also use suds lad tire applicator and scrub pads from Walmart as well very inexpensive and last a while too!

Big Facts Bro🫡💯

😂bro I need one of those can't tell you how tips I've lost! definitely going to grab one or two!

Thanks for watching🫡 they have been around for a while just wasn't to big in the US and the ones who knew must have kept it to themselves.

@@D.B.K.mobiledetailing we did and now you're F*ing that up for us. Keep up the vids excited to keep following your channel.

Thanks for watching bro🫡 I'll post a link in my next video

Thanks for the info 💪🏾I’ll have to check that out. And thanks for watching 🫡

Oh most definitely! I rock with Carpro! That and KC make up 80% of my chemicals. Thanks for tuning in 🫡

Yea I just recently got my hands on it, I’ve been playing around with it I like it so far the only real difference between the two is s0.03 last a little bit longer. I’ve been using it to wash clay and seal🤫 thank me later. Thanks for tuning in🫡

Thanks for watching bro. Yea they are well thought out and put together I find myself using mines more and more even when they not paying for it. Definitely a time saver as well on interiors

Definitely especially if it’s excessive!

Congrats on getting started🫡 It really depends on the severity of the vehicle. Decent condition 1.5hr severe could be 2hrs + I hope this helps and blessings on your journey!

Thanks for watching and I definitely will. FYI I’d take that 45 min ride you won’t be disappointed! Keep us updated when you get it and how you like it

What’s up fam. Whatcha gone upgrade to?

@@D.B.K.mobiledetailing seeing this now I might get one of these but really don’t know gotta do some research

Thanks for watching fam what part of NC? Yea I had that issue as well. 🤔 I might need to reach out to them as well I don’t think I had it a full year I’ll have to check. Yeah that’s the only issue I have with it other than that great investment!

@@D.B.K.mobiledetailing , Lagrange NC. They have a two year warranty. I don’t think they have it in writing that they will not warrant the steamers that are used commercially because they still gave me a new one. Go ahead and hopefully they will give you a new one to sell or as a backup.

@@jamesdawson9907 I definitely am bro I just checked September made a year. I definitely go reach out to them. How did you contact them if you don’t mind me asking email or phone. Thanks for that info 🫡

@@D.B.K.mobiledetailing , I called the number on their website

Thanks bro. Is it still blazing hot down there?

@@D.B.K.mobiledetailingit’s not that bad the highs are in the 80s

Thanks fam. I got with them when they first started it actually came with both and a few other perks, not sure how they’re doing it now. I can’t complain

Good question and thanks for watching amzn.to/4gU5UOT this is the one I use not sure where your located but my ppm is between 47-50 so we don’t have real hard water I’ve had this and haven’t had to change the risen since I got it back in January this year. I only use it for my final rinse or if I’m washing in direct sunlight and diluting my chemicals. I hope that helps.

Thanks for watching fam🫡 I was in between mobile units it was either that or be broke it was a bit pricey but it was worth it. I had old clients and some new ones. I definitely wouldn’t recommend it starting out unless you have a nice clientele base. It actually made me want a van I had a truck setup before that the van is more convenient tho

Thanks for watching🫡 yea the Pw is good stuff💯

@@D.B.K.mobiledetailing your welcome bro

Thanks for watching fam🫡 Where is Lakeland?

Florida

Thanks for watching fam🫡

Thanks for watching bro🫡

Thanks for watching fam! I usually use PO unless it’s really dirty or a stubborn spot I’ll use GS. Both work great tho. Definitely PO on alcantara

@@D.B.K.mobiledetailing This makes sense!!!!!! I was told early days careful most APC's on leather, good to know GS can cope with a leather, PO in UK comes as 5 litres too

I usually dilute it 10:1

If it’s really dirty I will use GS followed by leather star

Thanks for watching bro. It was $50 when I first got it.

@@D.B.K.mobiledetailing I've been watching you, hunter, witmoor and A & A ... I love the dialogue and Q & A's from the Spanish guy. I can't spell his name off the bat but I can pronounce it.. I've been detailing since March 18th of 2024 and I've learned a lot and I'm still learning more... Generated $10,000 without any form of social media or website but I see now that to scale I need these credentials... I'm pacing myself and I'm not in a rush. Just continuing to take more jobs so I can work on my craft so I'm able to charge what I'm worth... I appreciate all your videos as also the rest of the guys.. it takes a lot to record & edit so you are appreciated...

@cutlasssupreme508 Thanks fam I really appreciate it🫡💯 Blessing on your journey and if you have any questions that’s what we’re here for💪🏾

Thanks bro🫡

😂😂thanks bro my bottle cracked and I had an extra ik laying around it works and I still use it

Thanks bro and welcome to the fam🫡💯! What’s it like detailing in Sweden? What kind of weather do yall get?

@@D.B.K.mobiledetailing I appreciate it bro! Honestly during October - March we have very cold weather and you can't really detail outside in fear of destroying equipment and the paint.

Thanks for watching fam🫡

Not familiar with your current setup but I strongly suggest branding your business on your mobile unit. Also consider getting a sandwich board with your phone, QR code & logo etc..

Definitely fam and thanks for watching. Try google my business and any other way you can be noticed and always always ! Do your best so ppl can spread the word. ruclips.net/video/sUtI70-JjcA/видео.html check this video out it might can help you along the way

Welcome to the fam🫡💯 My best advice is get out there and just start trust me you’ll learn along the way. Once you get more confident in what you’re doing I recommend taking a class on paint correction or coatings and yes enroll in RUclips University to learn new techniques and skills. The main thing is to start. Blessings on your journey and we’re always here to help🫡

@@D.B.K.mobiledetailing thank you again Mr. DBK.

Thanks bro I learned that early🫡💯 what God has for will find its way to you!

Same! I got nothing but mad respect for you bro🫡