Видео

I did this on my 2006. It worked. Except then my LED fog lights were half as bright when my (single bulb) LED headlights went front low to high beams???? Anyone know how to do this while keeping the fogs full powered? Or did I do something wrong?

Try it in your radiator for a squeaky clean engine.

In case for some people that this didn't work for. Install isolating tape on the front metal piece where the instrument cluster is going in :) (the metal piece thru which the wires thru)

👍

One thing you failed to mention in the video is that the two lugs you're jumpering are different sizes.

there is a rubber piece that goes under there according to partszilla schematic and mine does the same thing i just ordered the part!

So glad I found this video. Dealing with it now which lead me here

I had the same issue, I just stuck a thin rubber pad under it.

I certainly have this problem - gonna try this on the ride home and do the washer thing if that's the problem. It's not a mechanical sound - it's definitely a fairing/plastic rattle at certain RPMs that cause this noise.

I know this is an old vid, but I just bought mine on 4-09- 23. And as in another comment mine was the clear lens of the cluster hitting the crime cover. Take it apart as he showed and just but some clear silicone where the lens will meet the chrome cover. Tighten down and white the excess off with a wet rag. I have no more annoying vibration noise

86 to 87 idiot you flipped it over 🤦‍♂️

What is your remote start system you have?

Exactly the same issue I have. Thank you very much.

he ment 86 to 87

This made mine worse (nobody's fault but mine). My rattle isn't between the plastic and the metal - it's between the plastic chrome and the plastic, clear speedo cover. Crap.

I just bought my 05 in June and that rattle has been driving me nuts! Thanks for the info

I have the same mod on my 2007 Ram 2500 I live in a deer infested back road

My 06 1300c has this problem going to fix asap

Good call, I have 06 1300R,,,,you have to get creative in finding solutions, good fix

Thank you for making this video cause the way everyone was telling me to do it was making the fogs stay on even if the vehicle was off

Yes. I have the same issue. I’m gonna try it.

This just worked for me! My Battery Tender is tricked into charging anyway. We’ll see if it actually charges the battery

So this ECM? might be the cause of my 2003 Dakota left headlight not working? Tried everything else and cant seem to find the issue.

Right on Mad Maxx!

I indeed have the vtx rattle

Did this today. It worked great!! Thanks!!

My 2005 "rattles". When riding I push down on the gaige cover and it stops I though that cover was the problem.

Just fixed mine today. Thanks man.

I'll have to try that its annoying to hearing it

Thank you for this video, I'm heading to Ace Hardware right now!!

Awesome fix! Ive got the annoying rattle too so I'm gonna give this a try

Running with a relay bypassed can cause wires to melt... look up why a relay is used if you don't believe me.

Same model here and same sound. The rattle or vibration actually comes from the gauge cluster not seating completely tight between the chrome piece and the tank. I just cut some little strips of rubber (about 1/8" thick) and taped them between the chrome and and cluster on the outer edge where there is a slight groove or recessed area. Either way will fix the problem as it holds the plastic cluster tight against the chrome when re-installed. 👍

I have a rattle but I never knew what it was till I saw this video lol thank you!

Thanks bro mine has been doing same

Dawn on your tires with a stiff tire brush works better than any tire cleaner i've ever used. Plus you don't have to inhale the fumes of those nasty chemicals, Dawn is much nicer and safer to use. I probably wouldn't use it as you did in this video because it's very soapy and leaves a film behind.

That’s the stupidest set up I have ever seen. That I bolt is very soft steel and the wait of the trailer tung will peen that I bolt into the receiver and will make it hard to get out.

Could you put the relay back in to make the jumper wire tight so it doesn't come out of the relay insert?

Do u reinstall the relay after u insert the jumper wire?

After I put the jumper wire in to modify the fog lights do u reinstall the relay in the fuse block?

So glad to find this fix the sound was starting to drive me nuts 😳

I have an '05 that does the same thing. It started after I added a tank bib. It buzzes like crazy. Going to head to Ace today and get some rubber washers!

Tanks I have to fix that 😊

Oh no! not the Optima battery..

Did it work brother? I have a whole set of 6v golf cart batteries im trying to rehab.

*BLEW MY MIND* 🤯

Duct tape costs 5 cents, takes 10 minutes, and works perfectly......................and doesn't squish flat after a while.

I did this same thing to mine. It's better, but still buzzing a bit. I'm ready to chuck the whole dash. Before trying this I tried O rings, foam, rubber. The rubber washers worked to quiet it down the most.

Important question: Do I re-install the relay over top of the jumper wire? What were you talking about when you said you would add (???) when you got home....

Great fix idea.