Видео

If they extend the rail, put in an AR trigger and the new bolt release on the 9mm I'll have no choice but to buy (another) one.

10mm bog goes crazy!

I plan to buy the Voyager drop point for outdoor/wood tasks; which is why I am attracted to the Recon 1 in tanto shape for every day use. But I can’t decide between Recon 1 Tanto or Recon 1 Spear point for everyday use (there is also a redundancy issue with the Voyager drop point). Any help or input would be appreciated.

😅 I don't have that model... Something about junk guns 😔don't have much appeal

Angel 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 Angel 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 Angel 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼 😇 👼

Idk why he slammed it like that on that chambered round anyways. He clearly wasn't trying to eject that last round, because he cocked it back too slowly. An the fact that he tilted the rifle to the side, to help keep it in. But why pull the charging handle so far back ( basically like all the way ) to double check your live round. An then proceeds to slam fire it, which it shouldn't go off, but obviously can. An with a floating firing pin, even just a sensitive light strike.

Dont forget they are using bigger bolts

Um, that cylinder isn’t supposed to come off like that. You need to send that gun in for repair.

11:08 yeA I wOuLdNt Be DoiN tHaT 😂

I like the looks of the Monolith, and it may even be admissible to Canada (which is a market that American gun makers need to capitalize on). 💯

That's why pistol primers are used for pistols and rifle for rifles...

Nutnfancy talked about Grand Power handguns a long talk about....

GO needs to start importing the decocker models of Grand Powers handguns again.

Thank you for visiting us at TriggrCon and highlighting the OA 2311 platform. Great vid! -Mike

That 12.5 and price point is bad ass

I built a Mega set Rifle with a Troy handguard,Good Quality Billet Stuff,Thanks for Showing us this Great line of Rifle and Pistol Parts, Much appreciate this N.I.F.!

Amateur.......

I shot the 4.25 ported model and the 5-inch model at range day yesterday and was VERY impressed. I'm a Staccato owner and I honestly think this might be my next purchase. The little gas peddle on the left was a nice touch.

"My finger is my safety" said by seal in black hawk down

Four DIY alternatives: 1.) Ribbed silicone dish drying matt with camo adhesive tape 2.) Ehaust header wrap with camo adhesive tape 3.) Burn Proof Gear frt sleeve + exhaust header wrap and camo adhesive tape 4.) Split braided sleeve (Monoflex makes a good one) + exhaust header wrap and camo adhesive tape Bonus 5.) MOA Stealth Cover (actual cheap silicone suppressor wrap)

Wow that looks cool!

By wrapping these, realize you wont burn yourself. But your also NOT allowing the can to cool down, and it really needs to.

Muzzle discipline is ALWAYS important for this reason....Thankfully no one was injured.

My sergeant would scream FINGER OFFFFFFFF THE TRIGGGGERRRRR 💀😂

I was about to buy that last week, but CZ kept on discontinuing its units. I bought Glock 17, Gen 5 instead.

The SP101 is a great revolver...I own one. But for CCW it is outclassed by the Ruger LCR. The LCR is lighter, slightly smaller (and therefore prints less), has the same ammo capacity, and a much better trigger. It's also less expensive (at least from what I've seen in gun stores).

did the gun come in the OD green or did Jagerwerks paint it?

The cylinder doesn't pop off that easy for my sp101 it won't come out unless I disassemble it.. You might want to get your frame looked at.

Why did i hear a guy make a sound like he got shot? 😅

After shooting a g19 for years, I was finally ready for a full size optic ready pistol. Put the P10 in my hand and after one trigger pull…I was out the door at 399!

props to you guys for being safe. we need alot more of that in this world brother

Just get a silicone hot pad. Wrap it around and use an raked wire to wrap or stainless steel zip ties.

I had the TLR1 HL on the same length barrel P10F and found that the lens gets black when shooting just 50 rounds. Now I have moved it to the suppressor ready barrel length P10F and find it stays clean even after >1000 rounds. I am considering getting the same as you for my non suppressor P10F just so the light lens will stay clean.

I will say I'm a big cz p10 fan i have been running killer innovations magazine extensions and they do suck! They will come Apart on you with one single drop the little pin it has tends to knock the plate out a little i wish they would change it i haven't felt the trigger yet I'm curious about changing mine i have the overwatch precision trigger and I don't like it

Awesome video man, glad to see P10c videos still being made. Currently figuring out if I want to get the Killer Innovations or HB Industries trigger for mine as a first upgrade.

I wish you would have made a video showing the installation steps. And what about the barrel rod I don't see a link for that? Are these steps the same for all 3 versions?:: Socom, Scout, Full size? Please respond? Thank you.

Hello everyone 👋🏼 I have a Grand Power Stribog SP9A3SG suitable for all Glock magazines and I am very happy with it 💯👍🏼 Greetings from Tirol Austria 🇦🇹🫡

The thing is...he did not switch the safety

That little lady has a cold.

She looks niiiice!!!!🥳🎯👍🏾

Awesome blades, now it became proper tanto

Image seems horrible for a 640. Looks like 384

Sweeeeeeeeeeeeeeeett keep them reviews comin First to comment

And because it's 9mm like, the guy is still coming at you.

That looks like the best slide serations of all time but how is it with the holster?

Nice! Congrats!!

Hello everyone 👋🏼 ich habe eine Grand Power Stribog SP9A3SG für alle Glock Magazine geeignet und ich bin sehr zufrieden damit 💯👍🏼 Grüße aus Tirol Austria 🇦🇹🫡 ( Österreich)

Not in upstate ny 😂😢 nys is a special Ed state