![Cargill450](/img/default-banner.jpg)
- Видео 130
- Просмотров 734 845
Cargill450
США
Добавлен 5 янв 2014
I have built this channel to be simple, not to complicated actually just good friends and truck, but also we want to be able to show our journey of basic ownership and fixing problems as they pop up. The idea is simple really, we are nothing special but we still want to do our best to repair and customize our truck as we want to and we want to show you guys how we do it along the way.
SPLEAB CCV Kit Install and Review 6.7 Cummins
This Crankcase Ventilation System provides a SOLID solution to eliminate unwanted crankcase pressure and effectively eliminate any power-robbing crankcase pressure. This is also a nice way to clean up your engine bay for more room for modifications. This is the best way to be sure your engine is getting the cleanest oil residue-free air ensuring the strongest combustion and best engine efficiency.
DISCLAIMER: Installing this parts on a later model Cummins truck with the CCV sensor on the valve cover could cause a check engine light to come on if the vehicle is running the factory calibration.
@spelabofficial
Spelab CCV Kit: bit.ly/4buKQdN
Spelab Official: bit.ly/4bwQv2Y
15% OFF for All: CG15
DISCLAIMER: Installing this parts on a later model Cummins truck with the CCV sensor on the valve cover could cause a check engine light to come on if the vehicle is running the factory calibration.
@spelabofficial
Spelab CCV Kit: bit.ly/4buKQdN
Spelab Official: bit.ly/4bwQv2Y
15% OFF for All: CG15
Просмотров: 57
Видео
ATS Transmission Cooler Install 2006 Ram 2500
Просмотров 16921 день назад
We finally got the ATS Transmission Cooler all finished up and I want to show you the ups and downs of the project. The cooler is a great product and all of the parts they do send you are great parts but I felt that the kit was missing a thing or two to get it installed how I wanted it. ATS AUXILIARY TRANSMISSION COOLER KIT WITH 1/2 INCH LINES www.atsdiesel.com/ats-auxiliary-transmission-cooler...
Wehrli Fab High flow intake install on 5.9 Cummins
Просмотров 279Месяц назад
Today I had the pleasure of installing the Wehrli Fab high flow intake horn and intercooler pipe kit on a good buddies 5.9 cummins. I have to say this kit was so nice to install because the parts just fit perfectly. 2003-2007 5.9L Cummins 3.5" High Flow Intake Horn & Intercooler Pipe Kit www.wcfab.com/i-31643992-2003-2007-5-9l-cummins-3-5-high-flow-intake-horn-intercooler-pipe-kit.html DIESELFU...
Siskiyou Sports Car Club's Epic Fall Enduro Race!
Просмотров 1883 месяца назад
Siskiyou Sports Car Club ssccmedford.com/ Rogue Action Drone www.rogueactiondrone.com/ DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
S10 LS Swap | Just getting started and plans for the truck!
Просмотров 1596 месяцев назад
I am getting things started with my S10 and the LS swap. I have been accumulating parts for quite some time now and it is time to get deep into this project. I wanted to go over some of the plans with this truck and what you can expect with this project. DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
Insane Diesel Oil Filter Bypass Update and Oil Sample
Просмотров 7 тыс.7 месяцев назад
We are finally getting into the over view and update on my Insane Diesel Oil Filter Bypass kit. This has been long over due but to be fair this gives it a better chance at showing you what this kit is actually about and i think you will be impressed with how it is performing. Insane Diesel Oil Filter Bypass insanediesel.com/collections Lorenzo's Oil insanediesel.com/collections/synthetic-engine...
took the S10 racing again and broke it... | 4.3 Vortec distributor install
Просмотров 13911 месяцев назад
We took the S10 racing a few weeks ago and had a bunch of fun but the truck decided it was going to break again. When I got it home I discovered the distributor had fail and needed replaced. DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
Cummins belt noise | Don't be that guy with the noisy belt!!
Просмотров 1,3 тыс.Год назад
I have had an annoying belt noise for quite a while now and I can't take it anymore it needs fixed! In this video I wanted to show you a couple ways to attack a belt noise and hopefully fix it. DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
First rip with the s10 | Hoodoo Autocross 2023
Просмотров 411Год назад
We took the S10 out for the first time to an autocross event in Hoodoo. I really didn't know what to expect but the truck did awesome, I have a lot to learn but we will defiantly keep working on that. IBUILDMYDIESEL ibuildmydiesel.com/ CARGILL50 at check out get you 50$ towards apparel on orders over 250$ DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
center console swap in 3rd gen cummins
Просмотров 16 тыс.Год назад
I have wanted to do the center console swap in my 3rd gen Cummins for a while now and it is finally getting done. I wanted to do it in a different was then most other people are doing this swap because I wanted to keep my lower seat storage in the truck and seeing how the new console doesn't have the lower seat storage I definitely needed to find a way to keep it. If your curious to how you can...
The BEST modification you can do for your truck | Insane Diesel Oil Filter Bypass
Просмотров 7 тыс.Год назад
We installed what has to be the best modification you can do to your pickup to help it live as long as possible and that is the Insane Diesel Oil Filter Bypass kit. This kit is well known in the heavy equipment market but not really well known in the light duty market yet. INSANE DIESEL insanediesel.com/ CARGILL at check out gets you 10% off total order OIL - insanediesel.com/collections/synthe...
Getting the G56 Main Shaft back together
Просмотров 490Год назад
We finally got all the parts gathered to get the main shaft for the G56 back together. We ended up ordering more parts then we originally thought we needed but that's ok because now we know its 100% DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
G56 Main Shaft Tear Down | How bad is it?
Просмотров 519Год назад
We got the main shaft all torn down and now its time to see just how bad the transmission really is, We find out what needs replaced and what can stay. IBUILDMYDIESEL ibuildmydiesel.com/ CARGILL50 at check out get you 50$ towards apparel on orders over 250$ DIESELFUELCOFFEE dieselfuelcoffeeco.com/ CG450 at checkout for 15% off orders
Another broken G56?! Disassembly and assessing the damage
Просмотров 4,6 тыс.Год назад
We have another broken G56 but luckily this time it isn't mine. We decided rather then sending it out to be rebuilt we would take matters into our own hands and figure out how to rebuild these things our selves sense there are a few of these G56 truck in our group. In this video we are just going to get it d disassembled and just see what all is broken so we can get some parts ordered if we nee...
Finally back on the road!! g56/turbo is finally back in.
Просмотров 490Год назад
Finally back on the road!! g56/turbo is finally back in.
Installing the transmission the sketchiest way possible....... again
Просмотров 791Год назад
Installing the transmission the sketchiest way possible....... again
New Valair dual disk clutch!! why I chose this over my Clutchmaster FX1200
Просмотров 2,6 тыс.Год назад
New Valair dual disk clutch!! why I chose this over my Clutchmaster FX1200
Installing the temporary turbo setup on the 6.7 cummins
Просмотров 449Год назад
Installing the temporary turbo setup on the 6.7 cummins
Its Turbo season!! Taking my turbo off and you would never guess why
Просмотров 254Год назад
Its Turbo season!! Taking my turbo off and you would never guess why
Broken G56....... again, This one might be serious
Просмотров 2,3 тыс.Год назад
Broken G56....... again, This one might be serious
OEDRO Quad Fold Tonneau Cover for long bed trucks | Install and First impression!!
Просмотров 4,6 тыс.2 года назад
OEDRO Quad Fold Tonneau Cover for long bed trucks | Install and First impression!!
The best gauge mount out there!! Finding the RIGHT color
Просмотров 3812 года назад
The best gauge mount out there!! Finding the RIGHT color
The Mega Cab gets a Glacier Diesel Boot kit!! | Is this our problem?
Просмотров 3522 года назад
The Mega Cab gets a Glacier Diesel Boot kit!! | Is this our problem?
Is it broken?! Huge power loss on the mega cab | This could get expensive quick
Просмотров 3792 года назад
Is it broken?! Huge power loss on the mega cab | This could get expensive quick
Installing Amp Research steps on the Megacab!!!!
Просмотров 3,4 тыс.2 года назад
Installing Amp Research steps on the Megacab!!!!
Installing Isspro gauges in the megacab!!!
Просмотров 4552 года назад
Installing Isspro gauges in the megacab!!!
Welding up the stake pockets | is it ruined?!
Просмотров 3112 года назад
Welding up the stake pockets | is it ruined?!
Stake Pocket DELETE!!! | Getting more work done on the new long bed
Просмотров 3572 года назад
Stake Pocket DELETE!!! | Getting more work done on the new long bed
For those interested in 2024, I just bought a pair. They are shipped from the Chicago area and arrived in Williamson County Texas within 1 week of order with Fedex free shipping. The quality is amazing and ordering was easy. I would definitely recommend them!
What clutch? South bend? If so I bet it’s not fully disengaging and dragging causing your issue…. Get a Valair Quiet floater dual disc and it might solve your issues…. Seems very notchy…
Always good content!
Your in the next one my dude
@@Cargill450 idk if that’s a good thing lol worst is gonna be if my trucks ever in one
@jeffreyanderson7349 it’s a great thing and it will I promise
Glad to see you back brother!
I’m trying to get the motivation rolling, I need to get my but to sit down and edit 😅
@@Cargill450 editing is the worst part.
Been Awhile….Appreciate the video
bit.ly/4buKQdN
The alert message that came down from the top. Is there a setting to turn that on?
The message that comes down from the top is tied to all of the alerts if I'm thinking of the one your talking about.
@@Cargill450 I will try updating my device then. I get no such message like yours. I was hoping to use it like a shift light.
@curtisbuhs306 you can use the 5 red led lights on top as a shift light, even turned all the way up they aren’t super bright but you do notice them
@@Cargill450 I just figured out that there was another setting that turns on those alerts. Even though in the PIDs I had the alerts on. Jeeze. Not sure why there would be another setting to toggle all alerts on or off. It works good for an rpm shift warning.
What size lift do you have
It should be sitting right about 7 maybe 8 inched of lift.
Appreciate it 👍 looks clean and did it under 30 mins
Thanks for the awesome video. I ran that 3/4" down to the frame rail hose and shoved it in a hole. Now it vents into the closed frame box, and offers free rust protection without dripping on your driveway!
Only 12 bump stops later plus using the bar to advance motor, it was time for commercial. Get to the point.
Lord yes! I’m changing my whole adapter plate anyways, so I’ll be leaving the Seal plate on, and doing it this way and changing to the 48rfe adapter for my G56 swap. I would HATE to tear the oil pan gasket because mine doesn’t leak YET! 😂
Johnny elbows?
So i was about to send my trans to super stick, thanks for putting out the facts.
How do you change power levels
@@ronalec2658 there are ways to do it and I’m sorry I don’t know them off hand because I just have my tunes on a switch in the truck. I think there is an expansion of some sort that allows you to change tunes though.
Why not just remove the whole filter assembly out and install cover back???
The filter has the gasket built into it to seal that upper cover
I just cant get tired of replaying the 10 seconds starting from 15:23.
Mine won’t load there frozen
Nice video, it's good to see you back to making content!
Thank you man!! I appreciate it. It’s not fair to the friends I have made along the way if I just up and quit so thank you for always being there.
@@Cargill450 ill always be here to support your brand brother.
I need to add this cooler to my 06 mega. This cali heat isn't nice to my stage 3 randys trans. I got the mishimoto cooler and my trans still warms up.
A clothes pin around the bunch of wires will hold the boot back while you work.
I’m going to give that a try the next time I have to get into that harness.
I need help wiring my camera!! Please help
What do you need help with?
@Cargill450 i got what appears to be exactly the same camera as you... no backup camera previously.. no wiring experience what so ever. Head unit is the same as yours as well
If your local I would be happy to help otherwise I don’t know how much more help I can be, if you have questions along the way feel free to send them over.
@@Cargill450 can you help me find a website or source that I can use to find out which color wires do what so I know I'm splicing the right ones
@Yeahhhhbuddyyy let me see what I can do
So the oil is still going to the turbo?
No, I took the hose off of the valve cover that would run to the turbo and put a draft tube on it, a piece of 3/4 oil safe hose that runs down just below the oil pan to atmosphere, you also have to make sure you cap or plug the intake tube when you do it.
You deserve way more subscribers for the level of quality in your videos man!
Thank you I appreciate that!! Maybe one of these days who knows.
Good job but you didnt grease or clean the sliders or brake pads.Looks like the brakes have been done before mabe that was a problem.
I’m getting my truck painted professionally so was looking to get this mod done first so I can have my tailgate handle color matched along with my door handles. The shops concern is the textured finish. What did you do for prep for paint or process of painting? Also what brand back up camera did you use? With a hitch can you see well enough to line up a trailer? That’s the only reason I’m gonna go through the headache to install one
The texture is no big deal, you want to take the shine off with scotch bright then use high build primer, spray and sand, do that over and over until your happy then paint. It’s a summarized version but works really well.
I smell a 2nd gen swap coming.
Swap the world!!!
Im happy to see another video! Welcome back! I'm excited to see the s10 content.
Thank you man! I need to get busy
@@Cargill450 I need to produce better content more consistently
@cadilakisrodcustom your content has been getting better and better, I enjoy watching
@Cargill450 I appreciate you man! I recently upgraded my camera so I'm back on the learning curve lol
@cadilakisrodcustom I need to get a better camera setup, the GoPro is great but damn does it like to over heat
B&m makes a short throw shift tower now.
sure hope you vented that to atmosphere or put in a catch can. leaving that vent hose attached to the turbo with no filter is absolutely fucking dumb and asking for that turbo to go
Sure did, just a typical draft tube.
Trucks are meant to get dirty and beat up, I don't know why people think they are luxury vehicles 😂
Less surface area on a ceramic clutch means more holding power.
The prices are a bit painful... but the filters certainly look nice. Glad more companies are manufacturing these kinds of filters. If you keep your cars for a while these kinds of filters are definitely worth investing in. 🙂
Fitting a bypass filter is often a bit challenging for a lot of people. It would be nice if someone offered a fitting service. That would make these filters a bit more popular. 🙂
Trasko has a spin on filter that uses the same filter media as the bypass filters... and filters to exactly the same size: Tested with microscopy and oil analysis. :-)
Can't hear any squeak bruh.
It was there I promise
awesome idea and great video
That element looks the same as the one in my Australian Jackmaster Classic. The Jackmaster is a high quality roll of toilet paper in a sock. I have been using Great value 1000 from Walmart in mine.
The Insane filter looks the same as my Australian Jackmaster Classic but it is a lot prettier.
There are several 1 micron filters now. In the 60s all we had was Frantz and Motor Guard. Multi grade oils were crap. Delo 30W and 20W were about the best oils you could buy. I dont plan on paying up to 50 bucks for something as good as toilet paper at cleaning oil.
I used Castrol R 30 racing oil in the motorcycle. Not very economical.
Great video!! Thanks
Thank you!
Maybe I missed it, but, where did you order it from? Great video
This one a friend actually found for me but every now and then they will pop up on marketplace, at least that’s where I look for them.
So correct me if I'm wrong here but don't you now have 6 useless cup holders. How do you shift if you got a drink in any of the new top cup holders? Looks like they will all be in the way of your arm depending on the gear. Surprised nobody mentioned it.
In all honesty, on the console the far right is good. Middle and left not so much and the down low cup holders you already know about them.
Look how damn far those things stick out? lol watch out for those two giant obstacles sticking out the sides of your truck 😂. The factory tow mirrors are only 17” these are like 19” folded. Lol
They are the same dimensions as the factory mirrors
Another economical diesel 😅 what a bargain. But I mean it's got the same sound as the dempsters bread truck grrrr 😂
Thankz man! Exactly what i need to do to mine.
F350 6.4 and been running for 10 months and oil is still clear but starting to show a little bit darker. I also added the oil filter cooler and oil is a lot cooler generally cooler than the coolant temp. Also coolant temp dropped by 2 degrees. Guess since the coolant is no longer really cooling the oil much.
Don’t be fooled by a little color in your oil make sure you do samples periodically to see the actual health of the oil, you will be surprised
Did you ever swap your short shift out for the factory one and do some driving with the factory shifter on the clutchmasters? If so did it seem make a difference for you or did you prefer one or the other
I like the factory shifter over the shorter shifter, you had me thinking on that one because I couldn’t remember if I did or not
@@Cargill450 yeah I’m currently torn between doing another one of the fx1200 organic clutches but driving a little smart or doing the ceramic fx1200. My power levels technically should have a ceramic but the organic held pretty well until I did stupid things while driving with it. Like not downshifting when I should to pull with someone on the highway and heat soaked the clutch really bad. I’m running the b&m short throw shifter and absolutely love it. It takes a couple thousand miles to break it in so it’s not so stiff but once you get it worn in it’s a dream shifting
@TheWheeler2299 they are tough clutches that’s for sure but just be ready for the thing to be a light switch on engagement. I really want to do the B&M tower one of these days, I have heard nothing but good about them.
Please assistance, I installed the turbosmart bov for diesel , I have an modded ISF2.8TDI....I do not know which way to place the controller arrows
As far as the arrows you have duration and sensitivity, it’s a lot of preference really but it all depends on what you like and a little bit of how quick the boost comes on
@@Cargill450 mam truly appreciate... now at 400 torque 35 psi
@chuckbarquero5327 definitely play with it, I would think you might want the sensitivity at 1/3 duration start in the middle
Ive had this in my truck for a year now and I must say this is the buggiest thing I have ever had to deal with.
What size compressor is that
If I remember right it’s just a little 1.4 or 1.5 CFM compressor
Did you ever make a video on how to rebuild the halo's? I bought a used set and the passenger side halo and the tiny amber marker light don't work. 😢
Not yet, I really really need too but I have been dragging my feet to no end.
Well......get to it! 😅