Видео

I just replaced two of these bad boys because of this video thanks for putting it up!

Great advice on cleaning the acid.

Great video but I would have not sped up the video at 1:46 -- this is an important step.

Do you think the auger was really necessary or would vinegar alone have done the job? I'm back and forth about buying an auger, but the soap scum is pretty thick. Also, how did you get those pics of inside your drain? Big fan of the subscribe animation 😊

I don’t know if this is trivia, but I always thought it was backwards until I went to diesel school but you remove the red first and then you put it back on first

I never quite feel like I know how to estimate and never quite saw a tutorial that didn’t say “it should be the same size”. This is the best explanation I’ve seen.

The puck light is in a totally different part of the ceiling. Where was the wiring in the ceiling for that light?

You make it look so easy , I am going to have to replace about 3 of my shut off valve’s soon, thanks 🙏

Cut off old valve and replace with a SharkBite Max 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression Quarter-Turn Angle Stop Valve. 10 minutes to complete.

Thank you for the video!!

That little animation of the 'wildcat' with the paint brush and hammer is sneaky awesome.

Great step by step! And needed that battery type suggestion too! Subscribing and sharing! Thanks!

If you want to see a job done right . . .

❤

All those people replying they prefer fluorescent lights… why are you watching and then commenting on this well organized and clearly explained video? Oh wait, it must be all that healthy melatonin producing strobe lighting that’s got you making such wonderful choices while you’re narcolepsing…😅 P.S. Excellent tutorial.

Did you loop the supply line to create an air seal or was it due to it being long?

Heads up for LED bulb life: you’ll either want somewhat open/vented fixtures or bulbs rated for enclosed fixtures. Otherwise, the electronics overheat and die way early!

What you are saying is completely true. Another reason you disconnect the negative first is while you are loosening the negative cable with a wrench is if your wrench comes in contact with anything metal under the hood nothing will happen because the car has a negative ground. If you decide to disconnect the positive first and your wrench touches anything metal it will cause a direct short to ground and cause a lot of damage.

21mm and 24 mm open end wrenches fit the valve and the nut, respectively. 5/8-inch open end wrench fits the lower braided supply line nut.

As a mechanic this was perfect its short, sweet, and to the point while providing excellent commentary. You even gave tips on what you can do to help retain battery life while not being necessary they definitely help preserve the battery's life.

Tbh thats a downgrade

Thanks

Thankyou!! Subbed. Blessings.

I just need to replace the line it's leaking from the part that goes up into the toilet I don't need to do all that extra stuff

Thank you very much. Perfect tutorial.

Why can’t I find that exact ladder that comes with the cat? No stores seem to have it… 😂

You are tenacious! Best trial and error demo to success video I've seen in a while!

Feit Electric is a good brand, but I prefer fixtures with replaceable bulbs. The original light fixtures were pretty nice for me, though. Also, I would sell those fluorescent fixtures to make money if I wanted to upgrade my lighting.

Thank you so much! Perfect - I’m a pro now

Can I have the old fluorescent shop light?

Thank you so much! I’ve been dealing with this for years. I thought it was coming from my water heater and every time I’d treated it with bleach the odor went away for a while, but I think that was because I was rinsing the bleach out through my shower and that was temporarily reducing the odor. What a goof! I’m going to HD this afternoon to get some stuff to fix this once and for all.

my ladder didn't come with a cat, is that ok

I would have taken the fluorescent tubes as I’m not a big fan of these LEDs.

Just under 3 hrs? This is why guys get paid more. 30 minutes tops! Wtf are you doing for 3 hours?

FLORUSCENT LIGHT BESTT. LED LIGHT 🤮🤮🤢🤢🤮🤮🤮🤢🤢😌🤢🤮🤮🤮🤮🤮🤮🤢

Thank you! I found this to be the most practical and informative video for compression valve toilet supply line replacement. My only comment is that I prefer the 1/4-Turn valves. They seem to be more reliable.

i never actually thought about that when I had do that with our Jeep. The RFID makes perfect sense. very cool, thanks!

ASMR!

Great review‼️

Thank you ma'am!!

I had one that stopped getting water through. I bought a new one , it is now doing that again. These are expensive and you should not have to modify it for it to work!!

You’re a lifesaver!

great video! only thing i can add is have a backup voltage tester… i once had a defective unit giving me obviously erroneous info so i researched it online & the unit was under a recall!

I dont get a beep when inserting a battery, i tried several of them. Not working, guess ill have to call aquasana

Your video included everything I needed to know. Great job. Very detailed, entertaining and to the point. Thank you.

Thank you!

I want to use it for the wood furniture on my Mossberg 590 Retrograde 12 gauge pump-action shotgun. The original factory stain is too basic for my taste. I like the natural look of your mirror. My shotgun has walnut wood so i think a natural looking clear topcoat would look beautiful. Thanks!

A good drain auger will definitely clear the mineral deposits as seen on drainage channels. Bicarb and vinegar cancel each other out.

That "yard"stick will only make it down about A FOOT before hitting the trap/bend in the pipe...THEN WHAT? STUPID VIDEO!

Pro-Tip: If your shirt gets stuck, you can use another one, and another one. Use as many shirts as possible, because the negative pressure will push them back out.