Видео

@bruceaskin9645 very good points mate, leads will be hard, I was thinking of running air line along the walls, dust and dirty stuff... I was going to dedicate a bay for rust repairs and sanding, have dust extraction and maybe a partition wall?? Or curtain??

Plan for the minimising of unproductive time, cleaning, packing/ unpacking and moving stuff around. Pay special attention to your spray booth, light position and various air connections. Dragging hoses around the floor creates dust.

@bruceaskin9645 yeah good idea, I needed better lighting in my last booth, hopefully my new plan is better, I wonder if LED or fluro lights are better 🤔

@pangaute thanks mate, good advice! I definitely wanted to insulated it, aircell is pretty dear but, but I think it's probably still the cheapest option for the roof. The walls I wanted to sheet, and I'll probably insulate them with batts too, what do you mean double skinned? The sheeting inside and the iron on outside?

@russelblackwell6041 will do mate, been looking for good videos to watch on sheds actually 👍

@russelblackwell6041 can't find the video you mean mate, has it got another name or handle?

Yarnies garage solid guy with a beard his cars are also amazing Xy ute with 260 boss chassis

@russelblackwell6041 oh ok, I'll try find it cheers mate !

Yeah absolutely! ill make sure there is a chair there for you around the fire when the beers are on!

thanks Ant! yeah great idea, ive gone extra 25mm thicker on the slab for that reason, hopefully it is enough and thank you very much mate, it is a huge leap of faith but at least live will be more enjoyable! cheers matey

@@TwistedMetalCustoms before settling on your concrete thickness just do a bit of research on what is recommended by the manufacturer or hoists. I say this as my brother in law didn’t check this and when he purchased a hoist he found his concrete to be just 25mm to thin and had to abandon the ideas

Cheers Phil! i reckon you are spot on... i love my fire places, probably wont heat up much but a good place to warm the hands up and have a beer!! and the toilet.. well.. i too like to be civilised sometimes haha

oh wow really! that must have been hectic wind! Yeah high quantity of power points is a great idea, and a charge station to, all in one place, i like that ! safe to say I've added to the build!

@@TwistedMetalCustoms cheers mate You can’t go wrong with stuff all in one place Been a game changer for me Yeah we get some strong wind gusts and this one grabbed the door that was pinned open with a car tyre and ripped it clean off

@@michaelharrison500 holy moly, hopefully i dont have the same weather at this place haha , cheers matey

Haha this is very true Reardo!

@anthonybulmer1198 haha it was way funner that's for sure!! Cheers matey 🍻

@@bogader89 cheers mate, thanks for watching ! 🍻

Cheers Danny!

yeah.. you are not wrong haha.. in fact its exactly what i ended up doing in the next episode, i got my wires crossed and didnt realise how cheap the skins were, but you are spot on mate! but at least now i know i can shape a replacement piece if ever needed for a small patch 🍻🍻

@@TwistedMetalCustoms Ive been a panel beater spray painter since I was 15 years old I’m about to turn 50 soon and I’ve retired and brought my own place and only want to work on and finish my own cars one EH Ute .3 xh falcon Utes one 75 ford TD cortina and maybe one other car a HR Ute after that I just wanna drive them up the Goldcoast Cruze around go to car shows and Summernats live life out before I all ends

@michaelbyrnes7944 mate that sounds like such a good idea, I'm a carpenter by trade... so I'm working on all my own projects with that exact same plan in mind, I want to be able to enjoy and drive my cars, I'd rather do that then have one in "project" status for 15 years and then be too scared to drive it in case of a scratch haha.. well I think you have a good plan, hope to see you about on the road or at a car show one day mate 👍

Hello from Australia! thanks for the comment, glad you enjoyed it, cheers 🍻

cheers mate, it turned out much better than i expected to be honest !

Cheers Benny! glad you found TMC, welcome aboard! oh i like the 1 tonners, 2 at once wow good stuff! plenty of everyday tips and "how to" in previous videos mate, and yep.. pretty terrible burnout attempt haha, i will get some tyres ordered and tailshaft and redeem myself i swear 🤣🍻

@ronaldlingle8766 this is where I won't tell you so you watch more of my video haha, joking! 👌 glad you found my channel Ron, the engine and gearbox combo are factory. It's from a 2001 AU falcon, v8 EFI, has a T5 manual box, thanks for the comment and hope to hear from you again 🍻

@@TwistedMetalCustoms oh you will I got content icon beeping at me for your channel right now. Talk later

@@ronaldlingle8766 sounds good mate cheers

@ernestchapman1194 ooh cool project mate! I am pretty sure the J3 chip can support most extra add ons, safest way would email or call TI Performance (or Facebook message ) and let them know your plan and to see if they can supply a J3 chip tuned for your purpose, The J3 chip primarily is to just bypass the security and BCM stuff, so all you will need is a ECU, like me. Then you do whatever you want to the engine, then go get it tuned, as if you would any other motor I believe , cheers for the sub mate! 🍻

@@TwistedMetalCustoms thanks for the info just got done checking out their website and seems as though the stage 3 chip and complete tuning kit is what the doctor ordered. Ironically enough I happened to have a second 99 ranger ext cab that is kinda going the same route as your build except for a351 cleavor and the cab off an old Studebaker truck (basically just windshield frame and firewall) the rest will be a custom Woody wagon 33 Willy's nose and fenders

@@ernestchapman1194 thats awesome mate, that would be a complex build too! also glad that the J3 chip is hopefully what you were after, cheers 🍻🍻

Cheers buddy! looking forward to see Ruby completed too!

@darf26 thanks Darf, I would really love to leave it, but as a semi buisness I can't have poor paintwork on my own car as It leaves a bad message haha, either I do it all properly (I'm actually leaning towards this now) or make it faded style, not sure yet though haha, cheers 🍻

@shanedavies9564 thanks Shaneo! We are both pretty stoked with what we achieved 🍻

@larrybritt7758 cheers Larry 🍻 👌

@@MetalMania3DTV-TAS-AUS legend cheers 🍻

@@TwistedMetalCustoms you're welcome 😊 🙏 🍻🇦🇺🪃🦘🤙

@afoolintheshed9929 cheers Lawnie! I appreciate the redemption 🙏 🍻

@@TwistedMetalCustoms A Lawnie is what ya call a burnout or skid on the lawn or grass. 👍

@afoolintheshed9929 oh hahaha, yeah now I see it.. sorry for some reason I thought it was your nickname 😅

@@TwistedMetalCustoms 🤣🤣🤣 Lawnie would be a funny nickname.

@@afoolintheshed9929 🤣🤣🤣😁

@barrygriggs4099 lots of steps to be honest, best way is to get it sand blasted, if not use that disc I show in the previous episode, it needs to go back to clean metal using that , it's the quickest way, then sand metal with 120g, then apply an epoxy primer to the metal, you can bog over an epoxy primer

@@TwistedMetalCustoms Thanks a stack man, i have my work cut out for me then definitely. I thought as much but am not experienced

@barrygriggs4099 have a watch on some of my other videos, I regularly give tips and tricks for home restoration, "strip it disc" is what they are called

@@TwistedMetalCustoms Appreciate it man! Hope you enjoy the Rugby today !

@williamquinones2870 cheers Will! I appreciate the pass on the failed burnout hahaha 👌🤙

@kdsboosted4954 hahah it's when bulk of the work gets done! Good Luck mate!

@damianjackson9084 cheers Damo! Yeah drifting it was much more successful than the burnout hahaha

@@Stuffdexdoes cheers legend 👍 🍻

@ChrisTucker-xe1is wow really Chris? That's awesome 👌, thanks for the continued support for the channel too mate! I can't believe it either! It looks pretty bloody cool I have to say 👌

me too Geoff! 🍻

@geoffberry1874 perfect! That means it wasn't a total waste of time haha, yeah it should work out OK after some more body work and final metal work I skipped 😅, cheers 🍻

@@danielwatson2910 cheers Dan 🍻

@@Vinkirby2023 cheers Vin 🍻 will do!

@@62_C10 haha cheers mate! I get tired just thinking about that week again 😅 thanks mate 🍻

@ChrisArmstrong-ir3fg cheers Mouse! Yeah mate I was absolutely wrecked on that day haha, was awesome catching up with you too! My first ever "Meet and greet" haha, cheers for making the drive on the day, yeah absolutely sounds like a plan mate, cheers 🍻

@@maxd4196 cheers Max 🍻

@philb386 thanks legend! I think we earned a beer too! 🍻

@russelblackwell6041 haha thanks Russ, haha barra 🤣, yeah definitely couldn't have got what we got done without her help! Rustoleum enamel.. to be honest I try not to use too much enamel or acrylic for my paint jobs, just personal preference I guess, but no, haven't used their product to be honest.. Oh trust me.. I edit all the swearing out hahaha 😆

Thanks Heaps Mick! i think so too, it's far from complete... but much much closer now! pretty happy how its turning out so far, cheers mate 🍻

@JoshuaWilliams_ thanks mate, I've made 53 more videos since this one so plenty to watch! Cheers for the comment 👍 👌

no worries mate! you can also raptor coat it instead of vinyl, ill be making a video about this later too, but good luck!

​@TwistedMetalCustoms thanks I posted some of my progress. 50 year old pillar post was so bad I used bondo glass

@DiscoGreen just watched it, I was worried that you used bondo for the structural a pillar part haha,bit it's a trim part inside? Creative way to make a part up! That floor wiring though 😅😵‍💫

@TwistedMetalCustoms lol yes I'm cutting out 90% of it as I have all new fuse panel and no hvac

Thank you! Cheers!

Thanks matey, a long term collection though... just have to get to restoring them all now haha

Hahaha is it weird that the thought had crossed my mind for a split second haha..

Thanks for the Sub mate! 32 truck would be cool! What style are you going with it? Cheers mate 🍻

@TwistedMetalCustoms no worries, im going for a full hot rod restoration, but I incorporating a few rad rod pieces 🤘

@shanebowles4854 sounds the goods mate, can't wait to see how it comes up! Should be a fun build for sure!

@damianjackson9084 hhahahahhah, I thought the same, the exhaust I built may have just unlocked "god sound 302" ... was it a fluke? Yep.. but it sounds angry for a stocky !

@nathanmacready872 I appreciate the comment and like mate, that shows me that you love it! HG wagon! That would be a cool project mate, but sounds pretty rusty!!?? If you are keeping the car then it doesn't really matter the skill level, as long as you are happy with the end result, and you learn as you go.. my first car ever was actually mostly fiberglass patches, but I've learnt a lot since then, all about progression mate. Focus on 1 section/panel at a time, that's your small milestones.. confidence is good, it helps motivation haha