Видео

Thank you for making the video. Definitely helps. But the link to the diagram doesn't work.

loved the video, how can we get that spread sheet ?

Great video, very helpful. Thank you!

Nice. Very informal. I'm going to get a Glowforge soon.

Clean up easier?? That’s too much work. Wow. Thanks.

Excellent video! Thank you so much.

Which machine have you used ?

You are the only one that shows on plates. I am engraving military logo to honor vets and I want to put their name and rank around the edge.

Where could I find a copy of the Material spreadsheet?

i noticed this last week and mentioned my patches went from 3:26 to 1:16 😧 crazy!

Came across this too late, now those tabletop pieces are $25 each :(

This is very useful. Thank you

Straight to the point video. I appreciate that.

Hi there, I tried to access the thickness sheet but it says it no longer exists.. Any chance you still have it?

Is the defocus test file still available? I went to the link but the file is not available there.

Can you re add the link for the Google doc sheet? It doesn't seem to be working, Thanks for the video!

Where can we get the files for the risers and the measuring thingy?

Is it just me or is the file not on the website linked in the description?

I had great luck with this for over a year. Suddenly, my Glowforge won't cut it anymore, and I can't seem to find it at Lowe's. I wish some other suppliers of this material would materialize! The Glowforge forums tell me this is what comes with using dirt cheap materials, but I'd happily pay more for a substrate I could depend on.

Yeggi is helpful for search multiple sites at once, like thingiverse, printables, and cults.

You didn't mention the smell though. Laser cardboard reeks! Still great for prototyping though.

this video was bad it is a joke was very usefully

Glowforge is looking sketchy by creating this fast lane deal on premium. It’s a gimmick to make more money. That’s what it is. Cuz once their database offers premium access to premium users, the basic users are loosing data processing power. It’s hard to believe that the company would invest in a better database just to provide better processing to only a fraction of their users (premium), and therefore not affecting the speed from non premium users.

Useful. Thanks.

do you have a list for the GF settings for the different colors? JDS Leatherette Patches?

Would you use the same settings, (1000/full) and defocus to .2 for 1/8th inch glass for a shadowbox frame?

SOOOOO Cool , I want to try to engrave on ceramic plate on the top .... Have you try yet?

The link to the setting spreadsheet is no longer working. Is there any chance you can share a new link? Thank you!

I tried this on three different files and the time difference between vertical and horizontal alignment was never more than two seconds faster.

Hi there, Thanks for your video and file. I just download the file and run one pair of circles for test cut. Unfortunately the size of the circles are not the same as your drawing in the notepad and actual Ikea legs. Any suggestions? I will appreciate any help Thanks :)

Cutting speed worked well but I still get some melting on the under side. Any tips to remedy this?

Did you ever try to do the rim?

For some reason Im not seeing the test file :o(

Thank you! The best info and presentation out there. I was about to give up! ❤

Your settings are working great! Thanks so much for your video. I wish the price of the material was the same as when you made it! Still reasonable though. I wondered what you use for adhesive for the layers?

Great video! I tried using the link to the google doc spreadsheet, but it doesn’t seem to work! Any idea if it was reuploaded? Thnx 🤗

are any and all ceramic / stoneware plates safe to laser engrave on?

Do you need to use a barrier like tape over the shiny surface or is it good without one?

I can’t figure what’s going wrong. I followed exactly what you did. I put in .313 and it gets canceled. Then I try again and it won’t let me adjust measurements??

how much for you to make me one

I used these setting in my glowforge for a whiteboard cut, and it came out perfect. Two passes though! Thank you for making this video!

What setting did you have for cutting and along with what material since its 3/16 thick

im trying says print stooped must be precise size ??

This was very helpful and now I am looking to see if you ever did anything along the outer edge. Can’t find a video

Thank you for this video. I was desperate because I couldn't understand why my engravings were so messed up. I would like to engrave 8mm acrylic to bring out letters on 5mm. Right now I'm focusing on the 8mm sheet and engraving by going over the area 5 times at high speed. The result is very bad. Would defocusing work? Is it necessary to pass several times ? Thank you for your answer :)

Could you please show how to make acrylic fondant/coke embossers

Has anyone sublimated on the white board side?

Thanks for sharing, good idea for weddings too. Nice work. :)

Just subscribed, but can't seem to find the link to download the test file

Where did you get that Excel file? That would be very very handy for me.