Видео

Thank you so much. I was going crazy trying to figure this issue out. Your the best!!!

What brand coil did you get and from where

Printing right now, amazing job!

When you lost steps with the motors it felt like fingernails on a chalkboard.

Awesome design

Does the second circuit have to hold a load and draw current for it to stay open, can the bulb be used for that (given it’s a 24v bulb)?

Why use the belt but not direct gear couple?

the parts are not all from the company you mentioned, thy are from all over the place 😕

How the hell have you not lost your 10mm sockets please tell us your secrets.

I never heard of changing a coil as part of a tune up. How long was it after you changed the coil that it started giving you problems? I use NGK ignition parts specifically because I thought they were high quality. Also use Standard Motor Products and Denso for the same reason. But I guess bad things happen. Have gotten low quality parts from zone and advance recently and stopped using them.

had stalling issues in my 2010 OB,, 4cyl 2.5l (CVT), cleaned the intake which improved it very good but slowly got bad again. had the crank shaft sensor replaced and it helped. but would still stall changing gears occasionally. then started over heating. then i detected a leak in the radiator, so i replaced it. worked good for about 10k miles no issues, then started overheating again. found exhaust coming out of the reservoir. So i traded it in. it did have 170k miles but i was hoping the problems would end... they didnt.

One of the best CNC cabinet videos I have come across thank you. I am in the process of of rewiring an older CNC cabinet to incorporate more safety elements MCB's etc. Could I ask you what your ammeters are monitoring and how were they wired?

Just ordered the correct side mounted aux contact for myself after building my box. Latching circuit (except for the latch) success!

Nicely detailed video Hi, i need your assistance with my cnc loader profile. I am trying to debug probe functionality issue

Love this but you should make a version for the masses that don't have a 350mm print bed lol

as a person living in Europe, you sure you got the definition of standard right 🙂

There’s very little video content on VFD configurations thanks

Hey Build Bug, I love the way the numbers pop out, for my design I relied on the etching on the socket to be facing forward. If I knew how nice it would look, I'd do what you did. I did a slight change with the magnets. I have a slot on the side to slide in bar magnets, this way metal flakes and stuff cant get in to. Mind you, I use my organizers in a packout tool box, so I often pull them out which allows the magnets to pick up garbage. It's always nice to see what other makers come up with. I posted my design on my channel also if you'd like to have a look! Thanks, Marcus

I spent the last two year going from being a woodworker that wanted to build a CNC machine, to a DevOps AI Engineer all without learning AC, gawd thanks now i know i need to have more conversations with robots about this, also your annotations really are a life saver! Thanks 🙏

nice... now an updated version that is Gridfinity compatible!

Every iron file in the vicinity rofl i put a layer of duct tape or something similar easy to write clean before splinters

I feel you brothers thanks for making it can definitely relate and have the exact same ideas rare earth magnets purchased in bulk (for savings )im assuming ?! Am I right self made organizers i had the same socket organizers in the box i have at home i finally tossed them years ago after nothing fit where it was supposed to 🤬 then i start shopping for organizers and im beating myself up for not keeping them or selling at least. Hell yeah keep wrenching! Crap on ftw baby! How much is a 3d printer to get set up and printing these?

Are you using antifreeze in the water?

Love the "Crap-On" logo !!! Did you create that ??? CNC ??? 3D printed ??? I was thinking, for my box, it should be a "Snap-Away" logo !!! Or maybe "Snap-Off".....

First off I appreciate you! And your work. Don't take this as s criticism as I truly am interested in the "why" but why not just replace his complication with a simple switch?

I am looking into doing a make over on my CNC machines and I must say your videos are great. My systems have always use a soft stop system for my E stop, so when I seen some of these different hard stop configuration, I new I wanted to incorporate that into my new system. The one draw back I could see in the hard stop, is most of the time I hit the E stop when I realize I have made a minor mistakes and the machine is running. (I do not make these kinds of mistakes as often any more put when I was first learning it happened a fair bit ) Having both a soft stop and a hard stop is a ingenious idea I think for the reasons you explain in the video. Great videos you do a great job of explaining your topic and give more detail even diagrams than most other peoples videos.

Pretty neat, I wonder how hard it would be to adapt thse to gridfintity

Thank you for making this video. I am starting a CNC plasma control upgrade and this video was very helpful. Your whole series is very helpful very well explained and the graphics showing the wiring and how it works has been extremely helpful.

Thank you so much. Great design.

Well done good sir.

Hi, I was wondering when you push in the E stop and your VFD contactor opens up, how does your spindle use the dynamic brake? Thanks, Fritz

I guess I should have watched until the end before commenting, Nice work trouble shooting.

Was this all do to the motor tuning within your software?

Awesome machine!, Did you build this or did you purchase it? Ive been looking at different designs in preparation for an update. If you can share any information with me about your machine I would greatly appreciate it. it.

Very helpful, thanks for the easy explanation!

Hi, I have to say it is a nice explanation of your layout. I was just wondering why you put the contactor before the circuit breakers? Typically, the circuit breakers are powered up to feed the contactor. Same as in your house or industrial space where you have a circuit breaker in the wall panel and then that is feeding your machine or appliance contactor switch. Thanks.

Nice design

What material did you use PLA, PTG or ABS

Great print. Might be an idea to print the first section, pause the print to insert the magnets, then resume the print. It would encase the magnets and hold them in place. Also make wiping the bottom of particles easier.

Great job. Looks good and is utilitarian. One comment though. Most engineers I've met in my 30 years working at automotive say metric, which always should be expressed in lowercase mm, and inches or English, or American. We have been a metric nation since 1870, yet in most tool rooms everyone uses imperial. That is the correct way of comparing inches to metric. It's called imperial because it was based on the size of the king's foot, finger, forearm, which was a cubit no longer used. Thanks for not smoking during the seminar, but say metric and say imperial and you will be smarter than 80% of the engineers that I have ever met in my years as a design engineer.

When stalling the y axis, did one side stall while the other moved a little more, their by causing the gantry to go out of square?

thank you

Using some of these ideas, Thanks.

Cool stuff!

Not sure if there is a way to talk with you?? I can not seem to see the run button in this script?? I can only assume its because of the tab sizing but I do not see any way to change this? Is this something you could help with??

THE overshoot at super low speed is kinda ok because the low torque will drop it down that much😅...and thats why im here, how many watts do we need to make a 1000rpm 3/4 hole🎉 urs looks like 5kw

Thank you. These are serious questions

spot on. Great video. Thank you!

run a aluminum radiator.

this use helicar rack gear or straight ?