Видео

Thx great information

Do you think that putting a little talcum powder could help protect the belt (like there is on the inner tubes) and also reduce friction ?

Would be nice if you can mention all the tools needed from the beginning please

Quando non va piu meglio cambiarlo completamente costa 230 euro

suzuki savage 650- ..has marks like tape measure on back and some marks are higher/like every 4th 1 is taller. so earier.. but the jam nut when torqued... changes the belt on the back sprocket .../every dam time you torque it lol... so is added guess were marks be when tight hahahaha dam nightmare! still. im live dirt road nd the belt is way betterthan chain !

You did good bro bro. Im going to your next video. Good job on this one

Good stuff.

Great vid,thanks

Wonderful extremely in depth video bro. Much much appreciated man💪👍👍

That helps me alot. Thank you

Good bro

Thanks that really helps I'm getting ready to change some transmission seals and I do have to move the back wheel and then adjust it back to where it was so thank you for the help

Very thero good information well put thanks for all that helpful information.

Thank you! Very well made video. Nice demonstration of the trouble shooting!

very good video....Norsemen....thanks.....canada

Enjoyed your video, it was very helpful

My rear tire seems to be running against the belt guard on the inside just enough to make the tires start checking after a while , I'm going to take that lower belt guard write the f*** off the inside part, I don't need it on there now I got to get a new tire now I got to get a new tire the now I got to get a new tire the second now I got to get a new tire now I got to get a new tire it's the now I got to get a new tire it's the second time now I got to get a new tire it's the second time I've now I got to get a new tire it's the second time I've had to now I got to get a new tire it's the second time I've had to deal now I got to get a new tire it's the second time I've had to deal with now I got to get a new tire it's the second time I've had to deal with now I got to get a new tire it's the second time I've had to deal with now I got to get a new tire it's the second time I've how to deal with this, I should have f******

Excellent

Great vid

Where can I find part 2 of this video? Good job👍🚀

Super helpful

Nice video, thanks so much!!!! U sabe my life... where is parte 2 ??? Thanks a lot!!!😊

Man that was a really informative video especially the armature part most people don't even include the motor side of the starter. It was very helpful ,great information! Thanks !

I have watched a lot of different tutorials and many are very good. What I like about this one, is you smoothly transitioned from each step and explained why you are doing what you are doing! I found this excellent. And..... there is nothing wrong with learning something knew no matter how many years you have been riding. 30+ YEARS for me and still learning something new! Thanks bro!

Thank you for explaining the correct way to adjust throttle cables .

The sound in the belt when rotating the tire is normal?

❤❤❤❤

Good video

EXCELLENT FULLY EXPLAINED VIDEO SIR. EVEN STEVIE WONDER COULD FOLLOW THOSE INSTRUCRIONS!!😂

Great video learned a lot from it

I have an 03 FXD with that same starter. My brushes are around 350 one thousands of an inch. Not close to the 433 you state as spec. Where can the brushes be purchased. Having trouble finding them. Thank You.

Great imfo 👍 good video 👀😎

Hey Mr church thanks for the info however I believe I have to start from o again it was a bit frustrating to put everything back together on my 03 1100 Shadow Sabre but I enjoy wrenching and fixing things myself with the limited knowledge I have the manual held a lot when I’m stuck but not much illustration on cable adjustment I have beyond free play throttle and your video reaffirms I need to redo it step by step with the same patience you displayed thanks again psi I have the attitude that nothing mechanical can never intimidate me or discourage me 😊

Those pliers are invaluable! Do lots of (automobile) wheel bearings. Lots of evil snap rings.

Brother Joe, that inner primay race, was installed correctly. It just walked in!!

Thanks

you should of showen the return cable adjustment

Great video! Where is part 2?

good video

Thanks for removing plastic guard so we can see tension, just watched a video were guy left plastic cover on and you could not see tension of belt, I determined today mine was too loose compared to exact bike that was just serviced. I have no concern about doing adjustment without the tool, very good video really not much different than adjusting my older chain bikes, thanks for good video

Excellent! You know your stuff Brother!

Thanks!

Hey brother Joe love your videos Great video man really good not too many this specific, on RUclips. Hey I got an '05 Fatboy and I got it set at 1/2 in It seems tight no noise Am I good?

My throttle is starting to stick. I've followed your video and found i had a kink in the idle cable. Can I personally bend it back to just better off replacing it?

I think the mystery spot on your sprocket was your paint marker...😁 Good video man!

put a new clutch and fixed the Throw out bearing or the ball bearings in the ball now its running great.

thank you

This video was very informative. You broke it down easily so I could understand it and completely in a way that I can apply it to any starter situation. Thank you. I am looking forward to watching part 2.

Excellent video Brother, Thanks...

I'm really empres I could understand everything