Видео

Does the isolator comes with the O ring and new bolts?

does the hot water go through this plastic?

Not a cheap mod for Canadians $500😩

Bought this months ago and finally got around to the upgrade last night. Wish I'd found this video yesterday, would have saved me an hour of headache because i didn't know i should go counterclockwise first! Finall got it in straight and feel very good about it, no more plastic, now the sleeve is stainless steel. The pulls as SO MUCH SMOOTHER now and temps just a bit cooler but where I want it and seems to be more temp stable. Loverly upgrade for my Esperto Abile. Thanks fot the great parts and video!! One question, I will need new gaskets later this year for the Esperto Abile. Can you provide a link to the correct package i should buy? Thanks!

When will this be ready to purchase, please?

Hi, in my case i have a Elektra with that problem to much temperature in the brew group and i find on the internet one seal similiar of this to Pavoni and it´s result good! yes

end game coffee machine - looking forward for the release of the product, good luck!

Where do you get the wrench to fit inside boiler?

And I thought I was the only one 🙂. I've had my Kinu grinder for about 3 years and my La Pavoni (no bluetooth) for about 6 months. They work great together. I've made many purchases from Coffee Sensor. Highly recommend.

nice device. I would buy if I had a lapavoni

Love the videos. What would really improve the machine for me is a built in on / off timer. Second thing that would be amazing is a sensor that feels how hot the piston is and then either triggers the boiler or turns it off (kind of like a PID). I love my LP Romantica and Coffee Sensor made this machine so much better.

Looks good! I dump beans through the other side of the dish. Now…question: What’s the number on the top? | Is it out yet? I go to hot yoga and get soo teased thr😂

Do you not need to connect the PID to earth?

hi Tudor pls make a update about the profiler

Great to see this vid has been provided to assist us, the great unwashed, and was absolutely of assistance to me.. I'm going to note a couple of things in the process: If you don't want to disassemble the boiler, get the spanner.. Then, If you have a pressure profiler or airbuster installed, the spanner will be too long... I took mine to the bench vice, and "adjusted" it with a hammer. Now, you won't using the spanner in the conventional sense of spanners, you can only locate the nut and hold it, there will be no turning.... While I was at the vice I took the grinder to the shoulders on the spanner, so that I could better find the flats of the unseen nut.. And, yes, when removing the existing tap body, it will hit your pressure gauge, perched atop the sight glass.. I'm going suggest that, in the sense of working with bicycles: if you fiddle with it, there will be trouble... Leave the pressure gauge in place and remove the tap handle (that you will no longer use) in order to facilitate the removal of the tap body... At reassembly, and you will have already noted that the nut that holds the tap body on is oddly thin, with the nut held in the spanner, I had difficulty picking up the thread with the new tap body... It certainly wasn't an option with the two nylon washers at the tap body, depicted in the vid... The kit however came with four such nylon washers, so, before you place the nut (wafer thin..) into the spanner, slip in a nylon washer, to raise the nut up... Even then, in the end I just some how jagged it, and I was away.. Lastly; the kit doesn't come with a new copper washer, so it might be best to anneal the existing one, at your kitchen hob, before reassembly.... Hope this is useful..

Do you have any suggestions on how to straighten the hole that the steam tap screws into? It is bent inward and leaks. I can't seem to bend it without damaging the body.

who can smell the difference?

what is wiring AWG gauge used for connection 16 AWG or lower ? and the in line fuse wire connected to PID what is the fuse capacity?

You have to add shot timer to this system. I was in the market for your brew pressure gauge, but now I`ll be waiting for this one. Do you have an email list to sign up for future updates on this?

Great instructional video 👍

This is great but if you can add screen to see it instead of phone’s screen

Looking forward for it, brass or ss The question is, how behaves thermaly after that

Hi, This is a great tutorial but there's one but - I've tried to do the same with Esperto Abile and the group pressure gauge screws (there are two of them) are so tight that can't undo them - am too afraid to apply too much pressure as am not sure whether am supposed to take it apart at all? Also, would be good to mention there's a specific direction shower screen seal has to go inside the group i.e. square edge always to the bottom and rounded one always up.

Hello . Does the led blink when the machine is off? Mine blinks every 3 seconds . Not sure if that’s normal

Top view video not helpful

What food grade is required for the lubricant? Is it enough H1?

Is it possible to install this reversed for left-handed use? Is there a way to modify a steam wand to work in left-handed configuration?

Thanks. Perfect explanations for each step.

I was thinking of buying your Sensor Flow Control Device, maybe I should wait until this is out on the market, how long will it take?

Very interesting as I own a used one since a few days (we chat the other day on your website !) I could see that the play I have with my lever is normal, and also the lever goes down by gravity on mine. I just have dings on the nuts and I will change them. I have to control play of the piston too ! 1000 thanks ! It's time for coffee !

Thank you ❤

This is awesome! Will it be possible to use with espresso profiler? Or a similiar app will be developed?

Will there be a brass/gold version?

What is the thread on the adapter?

I was wondering why such a product didn't exist. Is there a way to follow to know when it eventually goes up for sale?

Looks Good Tudor! I second the question, what about the Air Buster? What to do about pressure and temperature surfing, if I don’t sound too much like a novice? Will try to make sense of it in this edit - I guess the probe goes on the side then. Just sayin.

Is there any waybit will be compatible with thr airbuster?

Oh wow. So cool. Looks so stylish. ❤ when is it coming out?

Niiiiiice 😮

Cool! When is the v3 coming out?

Great tutorial ! Can we follow it with the new Gaggia Evo ?

I mean the one at 15:26

Well done. How many amps on the line fuse protection? In case for replacement?

Hi, Nice vid, thank you. It would be great if you gave a measurement for the placement of the light and if you showed the machine with the lights on after the installation. It's nice to see what the work is going to produce. Thanks

What’s the advantage or purpose to switch this tube from the factory one, please explain, thank youñ

What kind of resister is that ?

Where can I get a bong isolator kit for my professional La Pavoni pre Millenium?

What's with the bigger force of the lever on the bouler while pulling down? Doesn't it bend?

I have problems with the push lever not springing back up in the downward purge mode. What can I do to fix this?

Great video @coffeesensor6612! It is very nicely explained. Can you let me know if this is an out of the box XMT7100, or it has been modified in some way? Adn why there is a need to a small grey jumper cable between PID terminal 1 and PID terminal 4?