Видео

quite a bit smaller than even the usp compact i would say.

do you believe this was a factory error or do you believe it was disassembled at the store?

I'm not sure, but I bought the display gun, and it could have been the only one they got from HK. I asked how many they had sold and they said they were not allowed to say. I suspect because it was a "new" firearm, someone at the retailer just had to see what the internals looked like. No proof, just my opinion.

if i had to guess i would believe that before i thought hk sent it out missing such important parts.

@@5280Armory I agree, I don't see HK sending out firearms missing parts.

thanks for watching. ak

too soon to tell. the 43x is a known value that has been out there for some years now. lets see how the cc9 does with some time. i already dont like the “recoil spring support” too easy to loose and break. i would like to see it rethought by the hk engineering team. ak

hopefully there will be a 15 round mag for the current cc9 as well. i dont see any sku #s at the distributor level yet? ak

@5280Armory given how long it took to drop this, I can't see HK not making a 365 XL sized version.

it would make sense, it would also be nice if hk would do a civilian version of the ump and g36 but i learned to stop holding my breath with them on previously mentioned. ak

thanks for watching. ak

thanks for watching. ak

thanks for watching. ak

still waiting for my hk rep to give a tutorial on this. since you cannot see it when it installed it is a curiosity to all of us at the moment. thanks for watching. ak

@@5280Armorydoes it interact with anything in the chassis under the slide? The only thing I can think of is that it holds the firing pin in alignment in addition to the lug at the rear of the firing pin.

it does not interact with anything from the chassis, at least not directly. the other curiosity is that the slot for the firing pin disconnect is slightly elongated allowing an obviously inteded small amount of front to rear travel.

@ does the firing pin spring press against the rear of the rectangular disconnect? Maybe it acts to decelerate the firing pin when it hits the backside of the breech (especially if dry firing).

i took it apart one more time just to be double sure but the firing pin return spring stops just short of making contact with the firing pin disconnect.

At the high risk of presuming that we are talking about the same issue of “to pull” or “not to pull” the trigger before disassembly? This is my thought on that matter. With over 25 years behind the counter showing and working with folks on a potential Glock purchase, I prefer the face to face feedback that I have received in the store and on range. As it pertains to Glock, I found that people either like the trigger or they don't. Whether they thought it was too heavy, gritty etc.. or not, it was ultimately up to them (full disclosure, I am neither a Glock fan boy or hater). So for me that leaves the topic of person NOT properly removing the mag and checking the chamber before disassembling. Proper training from a qualified instructor will easily circumvent a negligent discharge. On the topic of a Glock malfunction resulting in the firing of a round without ANY human interaction whatsoever, I am certainly NOT saying that it has never happened, I am just saying that I have never personally witnessed it. If I missed the mark on what your statement was pertaining too? Please be more clear with our viewers on what your issue is. Thanks for watching. ak

@ I'm just saying the HK design is superior from a safety standpoint because you don't need to touch the trigger at all to remove the slide.

Not having to touch the trigger for disassembly from a manufacturers point of view is in my opinion going to be the way forward for many companies. Likely going to be less liability for them. They cannot force folks read a manual or get proper training before handling. ak

thanks for watching, ak

thanks for watching, we appreciate the support. ak

are you here in the Denver area? and was it new when you bought it?

Brand new bought it at sportsman whse

I'm in Boise

is it failing to fire, feed or eject.

@@5280Armory it it failing to feed and eject

thanks for watching. ak

we didnt have any issues but over time? i suppose it could be possible.

thanks for watching. ak

@5280Armory your video was the only one which showed a clear, methodical and practical method for full disassembly, including removal of the magazine disconnect. I recently got a Girsan P35, and the method shown on the other videos, did not work, that said, I also did not have an issue with their trigger pin being incorrectly shaped (too narrow so that it wouldnt seat properly afterward, it mustve been an early QC or design issue). I detest those things. Ive taken them out easily from actual Brownings in the usual non invasive manner, but it simply would not unseat on the one that I got, and Id never had to disassemble the entire trigger assembly before. Im very grateful for the help. Thanks!

thanks for watching. ak

havent personally measured it but i trust b&t to be pretty close on their specs

not often for me without adjusting my grip. ak

@5280Armory had me worried for a sec. My match was sensitive to ammo. best hand gun ever.

I was very happy with it, hits on a 12 inch target at close to 50 yards were effortless. ak

sorry have been away for a while but it is not adjustable, though at first you would think that it was. ak

that topic draws much debate and ultimately it is up to the business owner of g9 to decide who can get the mil/police variation

thanks for watching. ak

thanks for watching. ak

step 4 5 6 7 and 8 you never need to do, so its same easy as AR15

that great news thanks for watching. ak

thanks for the support and we appreciate your business. ak

i too run the cci mini mag ammo, i just get more reliable results. thanks for watching. ak

thanks for watching, we appreciate the support. ak

we appreciate the kind words and thanks for watching. ak

I am happy to hear that Costa Rica has a method for those that want to enjoy the shooting sports and if needed, to be able to defend yourself and family. It sounds like a long process, is there a way for law abiding citizens to speed the procedure up? Americas second Amendment is a corner stone to our countries very existence and is no coincidence that it merited the number 2 position in our Constitution. Thanks for watching. ak

we will try to get more close ups in the future. thanks for watching. ak

I always lightly coat all of my bolt components and corresponding receiver rails that the bolt rides on, also the recoil spring and guide rod if one exists. a drop of oil on the trigger pin or pins. this process is very consistent with most of my semi automatic rifles. generally i look for moving metal to metal parts and always read the manual on the recommendations as it pertains to the recoil / gas operation system as this can vary from one design to another. thanks for watching. ak

i agree, thanks for watching, ak

thanks for watching, ak

I totally just did....now convincing my wife to buy it...🤔

i have been the "want" side of that equation for 30 years now. thanks for watching. ak

when i am on range and am not at an angle to point at the rubber burm ( 1st choice ). then "up" is not possible as the bullet will exit the building, so that only leaves down, the camera angle will not always show that i do value my toes and make an effort to not point my firearm in a direct path to any of my body parts while of course keeping my finger off the trigger. shot count is always figured to talk when the gun is out of ammo unless i am doing a handgun transition. thanks for watching. ak

i have tried to reproduce what your describing, the one i have here comes off easy with the hammer cocked or in the fired position, it should just come apart with little effort. are you still having issues? ak

@@5280ArmoryHey, thanks for the reply! I actually took the gun to my local gunsmith. Turns out I didn't have the ejector in the right position (I could see inside the barrel, as opposed to the opening being covered by the ejector). It wasn't something I was going to catch watching videos; I had to have someone show me in person since I don't have a lot of experience with firearms in general (much less rifles). Appreciate your response, and have a great New Year!

ok good to know, i will keep this in mind if i ever hear that someone is having the same type issue. happy new year. ak

sorry for the delay but the selector lever is already ambi. thanks for watching. ak

@@5280Armory thanks for the answer. As a left hander, after a few houndred rounds the long lever on the left side started to hurt the triggerfinger. And its very hard to operate the short lever on the right side with the thumb…. It is not realy amby. I found a aftermarket selector lever which is perfect….

thank god for after market fixes. ak

it is very difficult to enjoy your 2nd Amendment and be a firearm owner in CA. we also have an uphill battle here in CO as well. ak

I would definitly contact Springfield Armory for spare or replacement parts. ak

with a properly designed range everything is directed to the bullet trap. consequently you wouldn’t even need all deflective hard surfaces if your were lucky enough to find yourself surrounded by experienced and trained shooters but in reality that isn’t the case. Ak