Видео

i have the glacier and i love it and i'm going to buy one more and build it into a dually

Love your wpl 😊you can see she'll walk right over any rock 🤠💪👍

Keep spraying hard tyre's with wd40 , over time it attacks the rubber making them much softer /sticky

Best thing for stability is approx 10x .22 lead airgun pellets in each tyre 😊, my mn99 would roll over so i did this and she is so stable, the pellets always stay at the bottom of wheel low C.O.G

Beautiful scale , i love how they have the filler tube shown in reae deck otherside of filler cap , and i can see and hear its got plenty of torque,we've come far technology wise ,I remember my mum buying me nightrider rc 1980 and that wouldn't move on a carpet 😅

Thanks for sharing your idea!!

Good idea. AliExpress and eBay has a DIY mini receiver board with a small handheld controller for like $5 or less for those that doesn’t have a extra channel

Keren

Did you move the steering servo?

Very nice work! I would lile to use 97mm long Injora axles. The original WPL ones are 105mm long. I want to add 27mm wide tires on 1,55 rims. Will it work? What do you think?

Nice 👍🏾

I got mine today and WOW I am impressed with it especially after I installed the new sticky tires it climes up my chest and over my shoulder I love it I upgraded the esc transmitter awsome

What is the jeep in the back?

Awesome Review Video. been looking at TWS VTG80 for a while.

These trucks aren’t really meant for the kinda rock crawling shown in the first example. These trucks are ideal for scale trail driving. Part of the fun of building these little trucks for me is preparing spots in nature that I can return to and drive around/record clips.

the true issue with these truck both the mn 87 and 78, i have the 78, is the gear ratio. even with a 43T 370 motor and good esc the low end torque is really bad so what i ended up doing is getting those aftermarket WPL single speed gearboxes which much lower gearing and the thing performs 10X better, plenty of torquer with no throttle input

Beware painting the interior of MN trucks, the plastic they use isn’t ABS it’s polyethylene which nothing adheres to it, not super glue or paint. However you can treat it. It’s a few steps that are tedious but they work. Firstly you have to flame the plastic with a blowtorch, fast enough so it doesn’t melt, this will open up the polymers promoting better adhesion and will also make the mold release which is impregnated to the plastic come to the surface. Then you use scotch bright to roughen the surface followed by a 99.9% ipa bath. When painting make sure to use a rest strong primer and only then the paint will adhere to the plastic. If you don’t even the best primers I have just flake right off

would you suggest mn82 or mn99?

Subscribed!!

Nice mod

Great video great info 👍👍👍 I just bought both couldn’t decide

Надеюсь перевод для вас будет правильный, я много искал информации для того чтобы установить тяги вместо рессор, и ваше видео это лучше что я нашёл, грамотно и без лишней информации объяснили как все сделать и показали нюансы, буду делать что то подобное с ходовой))) спасибо вам большое 🎉 Смотрю с субтитрами и ютуб переводит почти все правильно)) но с пониманием что к чему, все становиться понятно)))

So if i get wpl 30amp esc, i need to get something else too? Its not just plug and play?

That's a beautiful little truck!

Great channel my friend! I watched a number of your videos tonight. Subscribed! Aloha from Maui 😎🤙🏽

Does it have brass steering links?

Nice and informative video.

Hello, Congrats for the building and video! I would have a question regarding what parts I should use if I would like to strengthen the suspension without conversion to 4 links (i have 2 spring leaf broken in 1 week)? i know that I have to buy the c34 shock absorbers and type 1 brass balls but the truss that I see on wpl site is dedicated to the conversion. I think I need to go with something from aliexpress...but what should I choose? Thank you, Aurel

I three of these system in my 1/10 crawlers. I love of.

@SRCE2070 Thanks for a fantastic and detail review. Sorry i have a few questions that i hope you might be able to help. For the WPL esc, is it plug and play with the MN tx/rx? And does it bring out more low end torque of the MN motor? It is lacking a bit with stock set up. Also, for the dog bone brass bushing, do you mean pushing it further into the plastic sleeve of the dog bone? Mine hasn’t broke yet but might want to tighten it first before it came loose or cracked? Thanks in advance.😊

Thanks for the video and the insightful commenting. Really appreciate your content. It's a shame how the incline of the rock area is so hard to judge when seen 2D on a flat screen. The steps give an indication though.

👍

1st to watch

Those are super scale. Nice 👍🏾

hallo,where i can buy? have some link like tokopedia or shopee?

I need to do the 4link, i keep breaking the leaf springs😢

Thanks. Looking forward to the video. That little FJ40 looks amazing too by the way. Is that a custom body on a 1/24 chassis?

Anyone know the size of those tires he put on the Fcx18?

I’m hooked on the injora line of tires also

I'm considering buying this RC, because this is my first time getting into the RC hobby. is the electronics stock strong in the long term if we play it right? If it's rarely used, does it break quickly like an ESC error?

I like them all,that’s my problem. They keep making them i will keep buying them. Few mods and they awesome ,great video.

Awesome Tutorial and Great info share my Friend ❤ Thks 🎉

where is the front bumper from mate? thanks!

I used to race, so my big tip for OIL SHOCKS is to get a lot of plastic shock piston discs for dampening experimentation. Usually they'll have two holes, but you can notch triangles into the opposite side edges to increase flow to make spongier shocks (10w oil) w/ softer springs so that driving at speed over terrain will look floaty and realistic instead of bouncy. #oilshocks

Is the link rod measurement from hole to hole?

Dang dude, great content! Keep up! 💪

Muito bom o vídeo amigo está bem realista, só está faltando um detalhe o personagem porque o carro está parecendo um fantasma andando é uma opinião amigo,👍👍👍👍👍👍👍😍🤩

Hell I’m still waiting on my mn82 was wondering what kind of tires you used for the upgrade? I’m also waiting on metal drive shaft n axels up grade.

The Glacier is now at $90 on fairrc (half the price of the FCX18).👍😊 It has an interior and front under fenders that are both missing on the K10. It also has a scale chassis more accurate than the FCX18 K10's. Not a bad RC truck. It hasn't the same purpose as the K10. Not made for rock crawling job. The ESC and transmitter are rubbish. Must be replaced by those from the FCX24. Then, this Glacier can be a nice scale truck. That's what i'm working on (i have one).😉

Seen a guy cut the wires on the turn signals but that might cut the circuit ... 4wd ya don't use blinkers.hahahahaha