Видео

Grateful for your videos good sir! You came heavily recommended from a friend for Analog Way videos.

Great Tutorial, I like to push the envelop and I hope you can help me. I need to create 3 different Super Source Macros in the Atem extreme and I need them to also cycle through after a set amount of time. How Would I create a Macro that would run the "other" super source Macros? thank you

how do you eject a single ssd usb c drive? safely

How can i add a launch command for spotify from the streamdeck ?

What I just bought was the ATEM bridge stream deck by black magic. They have a box that allows you to connect your OBS or ECamm software using the cat 6 cable and that will allow your computer to see program feed through your streaming software. Then that frees up the usb c port on the back of the atem so that you can record your ISOs to the SSd.

I'm late to the party but the unfortunate solution I have been using is running ethernet hardwire to the computer and a separate ethernet to the ISO which allows the ATEM to communicate to the ATEM software setup via IP Address. That's the unfortunate I had to connect the ATEM TV Studio 4K and seems to be the work around for the ISO. Using the LAN connection I was able to free up the USB-C to connect my SSD and I'm able to have full control on my computer as well. I tried using a USB hub but that did not work for me. My Mac didn't recognize the ATEM

Hi, i put the APC mini mk2 but the lights don´t turn on. Why? Somebody nows?

Like your build have started mine and should be noted it is going to cost you around $200.00 for everything. For me it is well worth it because I want everything in one spot and not scattered all over a table. Portability is everything to me. Randy below is right about the thickness of the deck it should be 1/4 inch but remember plexiglass isn't cheep. All in all it will be a fun project and I'm looking forward to share with you all when done. Happy streaming.

Well done, where did you get your monitor?

Just purchased an Ascender 32 and this series of videos are an invaluable tutorial - thank you!

When sharing your screen, how do you stop the infinity looping on the screen before you share your PowerPoint?

This helped me, thank you

The filesilze of the macro limitet for zome hundred of kb,

[Thank you for sharing.]

Just use an E2, save so much time compared to AW rubbish

Hi Red , How can I make Memory banks in groups of 8? what I mean is that most midi controllers only have 8 faders, so if I have 16 audio inputs in Vmix how can I tell to vmix that on the first memory bank the 8 fiders will control the first 8 audio inputs then moving on the second memory bank the 8 faders will control the audio inputs from 9 to 16 obviously without the faders interfering with the inputs from 1 to 8 or viceversa

You just saved me a bunch of time figuring this out. THANK YOU!

The RCS is a .AIR file, how do i open?

Hi, excellent videos. I have a question: our Ascender 32 has shown an overheat alarm. What maintenance do you recommend for that?

Hey, just wanted to thank you for creating these videos. Got put on a gig where someone is still using an Ascender 32 and needed this refresher!

Looking to build my own case for my ATEM SDI PRO ISO

I am building one too. I am putting all the connectors and power in the acrylic shelf to keep the case waterproof. Inside I am including a stream bridge to allow for program out. I am also using a headless raspberry pi for a stream deck that I can remote into using vnc viewer if I need to. A small switch inside will allow the pi, bridge, and mini pro to connect to the ethernet together. For the plastic shelf, I plan to use 1/4 inch black plexiglass glass from home depot. Once I have this, I also plan to build one for the extreme. The only thing I have to work out is mounting the screen mount, and the corner brackets to the case, thinking of using jb weld and scuffing the surface up to see if it'll bond.

Awesome video! I'm running into an ascender next week for the first time.

You seem so surprised that a device that is made to play and record video, does?

you need to work on your greenscreen skills

I have been using Central Control for about 2 years now. Fantastic piece of software. I just it to all me to use an old Tricaster LC11 control surface to control a BlackMagic ATEM 1 m/e mixer and vMix. Works like a charm.

bla bla bla in awful audio.... congrats for a sh*ty upload

When screen sharing application window (Power Point) you loose your PIP ?

goated video thanks man

What application did you use to create the transparent overlay? You never explained that. That is just as important, creating it as then importing it.

thanks for making this, i was trained on the ascender 6 months ago and have a 3 day show coming up next week this is definetly going to help

like that...cool ..bring more Videos

Thank you!

WHEN I TRY TO CLICK IT IT GIVES ME A OYELLOW TRIANGLE

thanks for the information of the tool. I have a question, can I use the macro buttons on my ATEM Extreme to trigger different actions or do I need a StreamDeck?

Great job bro!!!

the problem of this solution is that this bad software connection dunno if its the API or not cant handle multiple actions like if u build a multi-action with a few commands where spotify e.g. change the volume should play a specific song and after a specific amount of time u want to turn the volume down and wanna play a playlist aftwerwards its too many commands and will simply not work at a random point if u do this multi action button 2-3 times in a row. Also it seems to have bad connection if u have like 10 spotify buttons in your streamdeck. at a random amount of buttons u will get to this point where ur buttons seem to have "bad connection". The truth is: u just have too many buttons, but i dont know if the API is just bad or this programm is build up foolish like pinging spotify the whole time with every button and spotify refuses the conntection. (my wild guess why its not functional when u have multiple buttons) I am just looking for a solution where u just use spotify with Stream Deck and simply use it like if u're using the damn GUI. It cant be that hard in my opinion but there seems to be issues with legal rights to me why u just cant do theese simple tasks.

French technology.

My problem is I record one macro with super source and then when I record the next one it records over the first one and I have two that are the same. I can’t figure out why. Any ideas?

I'm running into a weird problem where the footage can be seen on hyperdeck is recognized on atem software and is assigned to a button but it does not show in preview and does not play when switched on its just a black screen but I know it's recognized because the time code plays within the software the footage just doesn't show on screen

Thanks! 😊

nice one cheers

this is cool, thank you! do you think you could do a video that show how to setup the input in case you have an LED wall so you will have a different resolution

I like that Batman 423 in the back. Got one of those myself!

Hey love the video just wanted to say you misspelled audio in your title. That is all, thanks for the super informative videos 🤙🏼

Looked like I could actually find answers to a few questions. But, man: you're explanations are more confusing than helpful. But thanks for trying.

doesn't work. piece of garbage software.

The call I'm trying to bring in is using a atem mini extreme pluged into a macbook pro. My vmix computer drops the 30fps to 15fps with that workflow If i just use their same computer and webcam combo it works. Does anyone have any ideas?

Wow Fat yawn at 3:50 couldn't edit that out huh?