Видео

@mlrutr8899 thanks man glad you enjoyed! And I might have it somewhere. Might!

Ok, cool thanks for checking

@fabele3277 thanks but was not mine. I'm not sure what your talking about?

@@anythinggarage The splash guard

@bigfootaintreal5454 thanks man! I love that little papio. Back at ya man!

@@shawndavin1768 got it!👍🏼😁

i JUST ORDERED MINE AND IT WAS 2300.00 FREE SHIPPING FROM TEAXS TO FLORIDA.

@tyronesharp8115 tension is where it needs to be. You got to drop 2 links to even numbers. The only difference here is the wheel is slightly more back than normal. We are talking about an inch or so. This happens anyway when your current chain stretches so much you're constantly adjusting tension tightening more and more. This bike is fine in it's current state but will need to be cut soon.

@anythinggarage lmfao tell everyone here you don't know shit without saying it. His tensioner is maxed out but then he proceeds to talk about the chain stretching. You drop 2 links slide tire all the way forward as chain stretches you use the tensioner. If I have to explain that you shouldn't own a bike

@tyronesharp8115 the tensioner is definitely not maxed out my man

@@anythinggarage that last little line on the hole for the axle bolt means it's maxed out smfh

@tyronesharp8115 why are you getting all hyped up about? It is not maxed out. I'm the one who installed it. It definitely has more space left for sure, it's nothing to write about my man.

went for my third ride actually on main roads today w my fiancé and he was doing 40 meanwhile im thinking im pushing almost 60😂 embarrassing

@PVW4EVER I definitely recommended it. I have no problems with it. Other than the squeaky noise up front with passenger, it's a great little bike for daily everything. Can't really freeway it unless you're behind a semi being pushed around by the wind

Do NOT buy from venom if possible. Buy from kronic racing. Venom sent me the wrong tracking number, and one of the riser bolts fell out of the bottom and the bushing and cup were gone on delivery, and after sending pictures and emails over and over they still would t send me the missing part. And when I sent a pic of what ended up being their battery tie down, asking where on the bike it went, they asked me to send a picture of where on the bike it went…….. they’re a nightmare. Dude from kronic sent me the missing parts venom wouldn’t for free. Do NOT use venom.

@GEEsu5 heck yea definately. So much better build and actually usable. I spent a total of close to 2000-2100 for all the mods on my vader. This one was 2700 shipped woth tags and taxes and all... it really only has an exhaust and it's faster and built better

@@anythinggarage thanks for the reply! It's been a minute since your last video, done anything since then?

@GEEsu5 I've built 2 mega moto minibikes from the ground up since but never made a video of it sadly.

@@JeffBassir-lo6zj if you exclude the rear shock, you're looking at about $550 in parts and miscellaneous parts total for everything I used.

Thanks. And how much was the rear shock?

@seanz401 there isn't 🤷🏻‍♂️ wasnt even a gasket before I took it off

@anythinggarage from another video I've seen there is a gasket it's a combination of metal and rubber I believe a donut gasket. I did see another kp mini 150 exhaust install and there was a gasket in there. And a round area in the engine for the gasket to sit in

@CuttinInIdaho I know I pronounced it wrong so many times haha

@papateeks6405 Yes absolutely!

@anglegrinder4630 the throttle cable is what's pulling the slide up. The spring is what's bringing the slide back down. If you let go of the twist throttle fast, it makes a snap cause basically the metal slide is "sliding" down fast. Makes sense?

@@anglegrinder4630 I have a separate shorts video on how to do the twist throttle on the handle bars. You'll see it on my channel

@airgunbubba2505 thank you very very much man!

It is smart to do a proper ecu flash after any air filter or exhaust mod , yes I would say , so you don't get your air to fuel mapping out of wack.

@craftingwithcharm7665 thank you. A couple mistakes here and there but you learn along the way!!

@JeffBassir-lo6zj on the first video I mention it. Around 187lbs or so

I think it was a 75" VM22/VM24 throttle cable (mikuni pz27). Try ebay like 13 bucks

I never wheelied on this bike. Im Sure you MIGHT be able to still do it. I did lose some torque, but the way I ride it I didn't notice much at all other than it being much more useful for city riding

Ain't no cop cares around here. Maybe my area? Ypu should be fine

You just have to find a cable with a small stop on the end of it I found one for the same engine and carb on go power sports.

What carb do you have?

@@anythinggarage MCI. It's the original carb on a 77 y,400

@mikeanthony8934 on an old yamaha dirt bike?

@@anythinggarage yes, it ran fine before I put the throttle cable on. As far as I can tell, it is opening and closing all the way.

@@mikeanthony8934 you might have a cable that's too long? You may need to see if you have to raise the throttle enough to get the slide to suck in more air. Other than that, Idk what to tell you. Could be an idle adjustment? Wish I was there

I know, so annoying!! 😑

@drmachinewerke1 I would depend my life on them. Life probably a few thousand miles but tbh better to replace as soon as one can. They aren't too pricey to replace.

I understand this. It's 2 links more than it should be. I can cut them off and I can still adjust

Powersportsmax or redfox

That's correct. Oil should always be checked sitting on both tires and alligned straight (someone holding it for you or you trying your best on your own). Don't go by it on the kickstand or swingarm stand