Видео

Fiber internet kullanıyorum bu ürünü alıp modem olarak kullanabilir miyim

how do u compare ubiquiti mesh vs say tplink deco/omada and asus? for tplink deco, they can do wired or wireless backhaul. and do a mix like have 1 ap wired, but the other wireless. also it has good roaming performance for wifi clients when moving about when handing switching between the closest aps. i just don't know how the ubiquiti especially their newer models perform as ap meshing in comparison

I am hopeful u7 enterprise is a much better product.. I was waiting for this Pro Max but based on your review id chose to now wait.. Thanks Sam!

Johnson Ruth Wilson Cynthia Perez Sharon

Davis Kenneth Taylor Jennifer Lopez Laura

Hmm. Have you tried using something like meshing a Unifi Express with a client hardwired into the Express? I'd be interested to see the results of a client hardwired into a Unifi Express saturating the wireless mesh connection. I have a Unifi Express in my living room with an Xbox hardwired into it. The Express is meshed to a U7 Pro currently and I can definitely see how the wireless performance can be impacted on the U7 Pro when the Xbox is downloading an update, for instance.

Is the right graph with or without mesh

Test Huawei BE3 Pro when possible. Thanks.

Good video, thank you, I was holding out for something without a fan, and wifi 6 works perfectly for what I need. I will wait and see.

I had this router and need to reset it once a day because wifi signal will not show for no reason

Best channel for routers teardown

Thanks so much for all of the testing, and the care taken to produce useable data! I have a mix of U5, U6+ and U7 Pro APs in my environment, and this data gives me excellent insight into what is happening in my system.

I wonder if it could be flashed with 3rd party firmware

I had/have a ac hd as a paper weight due to ubiquiti not servicing their products. I had a electromagnetic surge from lightning that hit nearby my house it corrupted the boot loader so it's stuck in a boot loop. the regular nanohd on my network was unphased by it. I called ubiquiti to see if they'd service it or offer a refurb like some companies will if you return the broken one and pay a set fee, but they do not offer those services. I'm very hesitant to buy another ubiquiti product because I've never had this issue with any access points before and it seems like this should have been fixable instead of throwing it away. I could see this same thing happening with the fan. Fan's die, especially when they collect dust over time. I only had my ac hd for a year and just out of warranty

Now the AX86U Pro supports VLAN with firmware version later than version 3.0.0.6.102_xxxx or above. Some models provide beta firmware (9.0.0.6.102_xxxx) to experience this feature.

love your videos great content would you ever consider to do a review and tear down on a msiRadiX AXE6600

Awesome tech details ❤❤❤❤ net hydra cool

Just FYI, today, there was a different one available on everyone's favorite mass e-commerce reselling platform from South America. This one is ASIN: B0CVJPCQFJ The new one is: B0DFHRYRH6 and it's called the MSI Herald-BE WI-FI 7 MAX There is a huge external difference, but same antenna. It says it's out of stock already. The MAX comes with a shield around it like it's really supposed to, but that makes it harder to rob and put in a laptop like some people are doing. Qualcomm NCM865 like the naked card. Same price. So I don't know if there are any differences on the inside or if this is just an update to put their logo on it and hide the M.2 E Key slot and card. The MSI website did not seem to have the drivers listed, so it's hard to see if they are shipping the same ones. Maybe they are waiting on FCC ID to get their parts shipping or something. Also, only the global MSI website had the new one. The USA site doesn't.

Could link aggregation possibly work on Zimaboard considering that it has two nics?

What If my Main Board does Not have a free USB Header? Is there a way to multiply it?

While the 7.1.18 EA firmware supports MLO, it causes my U7-Pro-IW to reboot every 12 hours or so. And I only have one 6GHz capable client, but that lacks MLO support. So I turned MLO off again :)

does this router work in india ? please reply

UI website says 'max power consumption 25 W' and 90+ % of that get converted into Heat ... too much IMHO

I agree with your analysis! I have a question: regarding the U7-Pro, besides the missing features like "MLO", is it stable? Or do the clients connected to it have connection issues?

What a lousy list of reasons. 1. MLO is still implemented. The first EA firmware is out there and Intel is also working on it (I got that BE200 non-vPro also). Let them develop it further. The mechanism is still young. 2. Yeah, that's what you get with new technologies. You'll be happy in 1½ year from now that you got it. 3&4. The U6-Mesh was warm. Be happy that they build it in. It will work, when it needs it. They put it there with a purpose. 5. Same as point 2, it's early and you'll be happy in a year or so. And there are lots of devices with WiFi 6E at the 6GHz band, so be happy that 6GHz AP's are getting cheaper, now WiFi7 AP's are introduced. You know what? Send it over to me. I guess I can appreciate the device more, and start making some positive RUclips video's.

I don't like its chain configuration. It is 2 x 4 x 2 (2.4/5/6GHz). I preferred 2 x 3 x 3 as 6GHz guarantees the latest high efficiency MIMO tech. Not like 5 GHz which old device make fancy high number of chain feature useless.

Why I change Wi-fi card in Laptop HP Victus 16-e0081AX (windows 11) to MT7925 but cant see driver in device management (open now hidden) install driver same in video

But Firmware 7.1.18 is being tested in early release

👍

I think Windows is set to support MLO on the next big update 24H2.

I bought mine from the UB store as well. Mine got Very hot! It burnt my minger when I went to pull it down off the ceiling. I got a blister! I had to pull it down became it kept power cycling every 20 minutes. I assume it was overheating. I RMA and got a replacement. The replacement doesn't get much less hot but it is not constantly rebooting anymore. I got to say I am a bit disappointed. I am debating to return this one and just keep the WIFI 6 enterprise AP which I had in service before.

Typical Ubiquiti... half baked, half ass release.

Ubiquiti in recent years always use these markings words like ultra or max to make its products sounds Powerful, but after several years of using its Wi-Fi 6 and Wi-Fi 5 Access points I think their intro to middle level products like unifi nano HD and unifi 6 plus or unifi 6 Pro have better cost-performance ratio. And Wi-Fi 7 seems like to have a long road to replace Wi-Fi 6 cause Wi-Fi 6 provides a significant increase in speed and range but Wi-Fi 7 does not. MLO is good but if using 2.4 with 5g it will increase latency and dual band 5g or dual band 6g seems like a better solution

Q3 2025? That's insane considering brands like ASUS and even Xiaomi of all things already have MLO available on their routers.

👍

@SamBondor The reason that you do not see clients in the Nebula is that you have Nebula in cloud saving mode. There is a banner in the top of the screen under this organization is using Base Pack version of Nebula.... The cloud saving automatically activates with the free version of Nebula and if you have not visited the portal for some time.

Does anyone know how can I run SSH on this router?

GAMING name is a reason to jack up the price

I can't tell when this guy says 88 pro and 86 pro.

at 2:46 6th ports along from the Left, there are 2 Capacitors in a vertical row, could anybody help me out and let me know the value of the top cap? just purchased some faulty Routers and one turned out to be a pro. The Metal heatsink had fallen off its mounts and knocked the cap off 😞Thanks! Edit: actually I just noticed the 86u has the same row of Caps, so ill pull one of another Router and test 🙂

No 6Ghz band and no 10Gbe inputs, so unless you want a glorified WiFi6 router, this is trash

I was able to install and get adguardhome working, I used the simpledocker graphical interface(Professional mode, installed it as a host, default env variables) however when I was in the Adguard web setup, it said that port 53 was not available, to fix this, I ran xmir-patcher to gain Root SSH access and changed the dnsmasq port to 54, also followed the first steps from the openwrt adguardhome guide, (the first 4 steps) You can configure DNS forwarding with the router web interface, but it won't block ads for the guest wifi or (any other custom SSID you add using UCI thru SSH, I created another one for IoT devices), it is better to setup DNS forwarding using UCI commands or modifying the files using SCP and your preferred editor. So once you get SSH access follow the Adguardhome Openwrt documentation to further optimize the configuration(DNS hijacking, etc)

That's a nice Wireless Steering wheel !!!

the other small shield is just usb3 shielding to limit 2.4GHz interference

I wonder what os this runs, probably some asuswrt but atleast some linux based os. It also seems to have a uart port so i think it might be possible to install openwrt but sadly broadcom is really not open about their drivers and their floss drivers are non existent almost

You just void the 0 year Asus warranty 😭🤣

Hello. Having recently taken the fiber optic I wanted to modernize in a router more powerful. At first I wanted to take the same router as you as I had read in comments that you could put an alternative firmware but I was thinking of a merlin firmware and not at all an openwrt firmware. As I hadn't been able to find any more information on the subject, I looked for another Asus model that I was sure I could install the merlin firmware. Now, while looking for more information on the Asus TUF-AX6000 router I received, I came across your video. I admit it's bad luck

WOW, what a great video - I need the better range for 2.4 and your test help me decide what to get! Thanks.

Great review, tks for this. Would love to see the U6 Enterprise included in your AP testbed, considering it is now going for the same price as the U7 Max Pro. I've read the latest FW (7.0.59) that you have installed on the U7 Max Pro resolved a lot of the Wifi 6E 6Ghz related issues, particularly performance being inconsistent / unstable on that frequency vs. U6 Ent, which has been a rock-solid performer. I'm on the fence as to which model to get 🤔

Do you know if this is the same process for the Asus tuf-ax6000?