Видео

@b.a.nfrazya Unfortunately, I don't remember, and there is no information about the package size in the product details. However, the product dimensions are 70.83 x 22.41 x 22.02 inches, and it weighs 18 pounds. Hope this helps

@ed_rt Thanks 💪🏾

305/35/20

@@MiguelEstrella_it comes unpainted, I took it to a paintshop

Yes, it is

Yes the shop removed them and sand down for painting, you are right, they are built in the mold of the bumper just as support pieces

@@ed_rt Thanks man! took my bumper to the shop. They didnt remove those, didnt even primer the bumper. the paint is chipping and peeling and they are trying to blame me by saying I wasnt careful enough and they dont put primer on bumpers

No, its an aftermarket

@bikelife_spida401 Yes, you could, honestly I just taped them but if you can find a plug that close the terminals go for it, sounds like a good way to keep them clean👍

@nomadic9953 Yes, if you have that is a pretty cool feature, unfortunately mine didn't came with one but maybe I could install it in the future

I have a pinned comment with the link to Amazon where I got it from

@@ed_rt that’s for widebody tho

@howardthe3rd01 Right, that one includes both the bumper and widebody that I bought, but if you just need the bumper, here is the other link: IKON MOTORSPORTS Front Full Bumper Cover w/Grille & Lip Whole Package Kit, Compatible with 2015-2023 Dodge Challenger Hellcat, Unpainted Black PP www.amazon.com/dp/B08KVSXQXL?ref_=cm_sw_r_apan_dp_YYVBK64Q5T5SCKE1C83G_2&starsLeft=1&skipTwisterOG=2

Just drop your question. If I can't answer, maybe someone in the community can 👍

I'm glad it was helpful, Thank you brother 🙏

Correct, the hellcat bumper doesn't have the base to install the fog lights, so yes you will no longer use them but I recommend you reuse their harness which also connects to the side marker lights, so that way you don't need to buy another one

Sorry brother, my challenger is not equipped with them.

Did u figure it out cause im having rough time too

I just hot glue the spot I passed the optic fiber thru so it holds it, but it looks like there was some hot glue residue from factory already in the headliner when I pulled it out if you wondering about that

Thanks man, and yeah those wheels were very good looking, I wonder too, I have asked them on insta but no luck lol

either one works on either side as long as they are installed like shown

thank you, I am glad it was helpful 🙏

It's forged carbon fiber

@@shinismoove only carbon I see is the shaker lol the hood looks like water marks

@@MOPAR_scatpack the hood is made of "forged carbon riber" look it up

Lol, it's supposed to be forged carbon fiber hood and carbon fiber scoop

No problem

No problem on mine, looks smooth

Heat affects? That guy is full if shit

I got it from bagriders.com as ptc cartridge

I did not paint my grills and just Installed them as they came but you can if you want

Yes is easy, I decided not to remove it at that time because I wanted to keep in case I need it for a replacement, but it's very easy to remove them, you just drill that top piece with the rivet hole and it separates, use a drill bit that is bigger that the rivet hole maybe a 1/4 inch drill bit for those, check this video so you know what I mean: ruclips.net/video/-NYeEygMBaM/видео.html

@ed_rt awesome, thank you sir. You've been a big help

that screw is part of the Front Fascia Bumper Bracket, check this link of the part as reference www.ebay.com/itm/385669986059?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g6thyqbkrc6&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY you can either remove the whole bracket and put a new one or try to remove the screw that got stripped and plastic weld another one they also sell the brackets separate right or left, aftermarket are arround $15 each but you can get the original parts at your local mopar part store dealer hope this helps

@ed_rt Thank you for the response. I had an idea, but I wanted to make sure that was the part in question. I know they make a sturdy epoxy for plastic and metal parts in cars. That will probably do the trick.

​@ed_rt looks like I'm gonna have to replace it. Epoxy won't hold the screw in place. I have done all manner of basic maintenance, so with your tutorial on removing the front bumper to replace it, I shouldn't have a problem. I have the necessary tools, and it would be cheaper than taking it to the dealership. They want 165 dollars just to diagnose it😂

@@countdracula4656 $165 for diagnose! wow, you can get the parts, buy some rivets and even the rivet gun and still be way cheaper, I think you can replace it too 👍

Thank you, and I put it on the trunk where is safe from the elements and close to my battery and its practical when I need to plug something in those USB and 12v port like lights or tools