Видео

Good Evening Sir, That Is Very Nice Power Wheels 😇👌👍 Nice Live Action Close View 🙏🙏😇😇Cheers 🍻🍻

I hear these dont work well with heavy rain tho, the ones costco sells with holes may be better for places with more rain.

HEART-DISEASE…..JUST GETTING READY TO ATTACK ❕🙄

Bro that’s some white folk cookin if i ever seen it

How old is the boom box on top of that cabinet ?

I couldn't tell if your roof was a steep roof or not but seems like on a steep roof the guards would make a big shift in the pitch of the roof. I don't recall seeing where you were located.... do you get a lot of snow? If so, did the snow cause any problems?

2 batteries together.... Screw the machine... Enjoy your kids face when they are going 40 through a field... In case of fire have extinguisher near...

next video.. solar powered power wheels 😂

I can’t see the link. Can you link in comments?

Going to buy one tomorrow

don't under estimate how much a good cleaning can improve your units cold air output. mine made a very noticeable difference.

Good video! Thanks for taking the time to put it out there.

how big is your deck? i ordered the same pool and planned on doing a deck, love the way you guys set it up.

So good

Wonder how good that stuff will work on car and tractor radiators?

I have the same tiller, had it for 2 years now. Bought it used at an estate sale for $300 Canadian, it had hardly been used. It starts good, lots of power and can dig deep. My only problem is (maybe it is my soil) it just wants to dig down and not pull itself ahead on it's own. It doesn't seem to matter how I set the wheel or the depth stake. It is like the drive system is so big and blunt, it can't pull that thru the soil. I have to keep wrestling the handlebars side to side to keep moving ahead, it gets awfully tiring. Has anyone else experienced this and come up with any solutions?

I put these Costco leaf guards on one of my gutters about 3 years ago. I totally agree that the quality is exceptional and they go on pretty easy. Just a couple of points. Make sure you clean that top edge of the gutter thoroughly so the adhesive on the leaf guards adheres securely. Also, as he put a few screws in near the downspouts if the need arises to go into the gutter to fix any issues, I, on the ends pieces near the downspouts cut the red covering on the adhesive strip about 4-6 inches and peeled them off. That way those last guards can be easily pried off to get into the gutter if necessary as most of the guard was not adhered with the adhesive strip. I have had absolutely no problems with the guards staying in place and like the man says, almost nothing accumulates on the gutter guards.

Expensive and will not work well with high pitched roofs or heavy rains.

You cannot buy 2 Mahindra Max 26 tractors for what you can buy a John Deere 1023e for...come on, you know better than that and we do too!!

I cut the discharge opening out towards the rear. Leave the frame for support. I can brush hog with mine. Don't be afraid to cut it. I would trim a little at a time. Did that 5 times. lol

Thank you so much. I was trying to figure out how to remove tension spring, then actually used the internet for education. You made my life so much easier.

Wont work like that in my ground

Power broom sand into your yard for healthier lawns

Quick question, I have the same machine. They are hard workers for sure. I notice on mine that sometimes the two front loader cylinders sometimes move back and forth. Only in the channel where they connect at the top. is that normal? Thanks man. Love watching your videos.

In hindsight, what do you recommend for a foundation to prevent premature rotting?

I just ordered this exact playset. What size area did you make the play area?

Tapping with wood or a deadfall hammer as your filling the crack will help it get to the bottom

Loving it - I too do not like the liquid stuff. It either looks good or terrible no in between and its hard to work with. This stuff looks great will give it a try. Thanks

new here...nice looking yard

Hi what size of pool is this?

Ur so lucky I’m always looking for deals an found this deal but it got damaged on delivery .. i got a 700 wood chipper for 200 an the rototiller for 180 bucks but only kept the wood chipper then they stopped the deal

I always use the screws. After many years you will get fine material build up in the gutters if you are near trees. Think about the way a river fills up with silt. When you install these, use gloves to avoid tiny metal splinters.

We just received ours and upon trying it for the first time, the hose under the pull cord on the right side, which connects to nothing, is pouring gasoline all over the unit and ground ... been on hold for an hour with customer service. any suggestions? I can see from your tiller that your hose is not connected to anything either.

What none of the videos for this specific gutter screen tells you is, my 3 boxes did NOT come with the bit or cleaning tool. My guess is, they wanted to increase their bottom line & no longer include those parts. Also, the install is not as seamless as the videos portray. With asphalt shingles, some were difficult to get lifted off the decking to slide the screen underneath. Another issue was, I'd run into roofing nails that would block the screen from being able to slide under the shingle.

I have a 21 1626 with about 100hrs on it and no issues. I recommend Mahindra.

Thanks for sharing, I just bought two boxes. One thing I want to ask, does the glue work? I kinda afaid if this is too strong then I cannot access to the gutter.

Good Evening Sir, that is an OUTSTANDING Review Of Your Strong Built Mahindra Tractor 💪👍😇 OUTSTANDING Maintenance Tips 😇👍👌Sir Green and Orange tractors ARE made of cast aluminum, not like Mahindra which are made of cast steel which Is More Stronger and Much More Heavier 💪👌👍😇 Be Well Sir Cheers 🍻🍻

Where do you get parts for your tractor?

Kyle,,,, at what RPM do you run the front loader and/or the backhoe ? Thanks in advance for your videos !!!!

Help! Brand new tiller from homedepot. Doesn't want to start. Checked and filled fluids and even went as far to replace the sparkplug, never started. Just clang when pulling the end of the string. Not too familiar with electrical. But did attemp simple spark tester and it shoed inconsistent spark. Maybe 1 every 20th pull? Rabbit, choke on, fuel on, pull nothing. Again brand new never used never started :(

Thanks for the video. I have a cola colored stain so I believe the brown is what I will order. It looks like a close match. I have a small crack about 40 inches. I believe this product will be the solution?

Is the size listed with the pool the top frame or the bottom feet when angled out. Trying to determine what size cement slab I need to pour. Thank you.

Is that a DIY solar heating system?

Hey man, great video. We have just upgraded our above ground from a 9' x 18' to a 12' x 24'. We have already dug up the old pavers and placed the new ones flush with ground(pool surface). My question is when you have the pool completely full.......What is the measurement from where the curved pool liner that touches the ground to the outside ("tandentcy side")pool side? And/or measuring out towards the leg? So....(?+12"=?) I see you have a measurement of "about" 12" from where the pool starts to curve under towards the ground("tandentcy side") to the u-shaped leg fully extended out to support pool wall. I have searched everywhere and cant find this measurement. I could figure this out the hard way but dont want to waste a bunch of water filling it up to get measurement. Why do i need this measurement? Good question. I am going to lay down some .75" thick xps foam for the pool to sit on(which is not yet layed down), then cut the artificial grass(which is already laid down oversized)to butt up against the foam board. The pool size is 12' x 24' but thats the top opening measurement. I am looking for the foot print size. The measurement that actually touches(contacts)the ground. This would help me out a ton if you was able to find that dimension. It looks like from your video of you showing where to place the blocks for the legs to sit on that its only maybe 8-10". Thank you so much. I realize that the pool you have and will be measuring is much bigger than the one we have, but i am pretty sure that distance is standard on these power steel bestway above ground pool. I have tried to contact bestway and they are no help. I should have took these dimensions before i took old one down and laid the artificial turf, but i didnt and now causing myself more work. Thanks man! I can send you a drawing if your still kinda wondering what dim i am after. Thanks!

Until the leaves and seeds, etc, get wet and clog the gutter guards, and then you have to clean your gutter guards, lol

Question, the included self taping screws. Are they also stainless?

I have the same mower, and that chute design is hot garbage. I’m cutting mine in the next day or two, and I plan on welding some small angle iron on the deck to give me a little piece of mind.

Cannot get any better

Loved the video filled with tips and trix. I started my new DIY water heater yesterday. 250 meters/820 feet of 20mm/¾ inch PEM hose uncovered on a flat garage roof. Started filling the pool with 7°C/45°F tap water and I got 27°C/81°F after the heater with the water running at 6 liters/1,8 gallons per minute. The weather was a clear blue sky and an outside temp of 24°C/75°F. You can check out this pool heater @SolarProjectsSweden and yes, I jumped in for the premier bath of the season yesterday with 26°C/79°F water in the pool. This will be hooked up to a 20V barrel pump that will run automatically on a solar panel when the sun is up and heats up the water. No sun - no pump - no heat

I'll be doing this job this summer. I thought my trees were far enough away but no. Seeds fly along way and my gutters are clogged. Clean out gutters and down spouts and drains and these gutter guards are going on. Got a 30 ft snake that attached to my pressure washer with a front and rear direction spray head. Works great for snaking the down spouts and the drains. Already cleaned the one downspout and drain n the front of the house.